Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 1049–1052 | Cite as

Informational Relational Models for Calculating the Cutting Conditions in Automatic Control Systems

  • S. Yu. KalyakulinEmail author
  • V. V. Kuz’minEmail author
  • E. V. MitinEmail author
  • S. P. Sul’dinEmail author
Article
  • 11 Downloads

Abstract

Stages in the automation of parameter calculations within automatic control systems for industrial processes are outlined. An informational relational model of the cutting conditions in turning is developed. A method is proposed for calculating the level of automation. The role of informational models in the automation of process-parameter calculations is demonstrated.

Keywords:

cutting conditions process parameters mathematical models informational models automation parameter calculation 

Notes

REFERENCES

  1. 1.
    Kalyakulin, S.Yu., Algorithm for calculating the parameters of the initial blank in the SITEP MO automated design system, Russ. Eng. Res., 2014, vol. 34, no. 11, pp. 713–715.CrossRefGoogle Scholar
  2. 2.
    Kalyakulin, S.Yu., Algorithm for calculating the parameters of the initial blank in the SITEP MO automated design system, Stanki Instrum., 2014, no. 4, pp. 17–19.Google Scholar
  3. 3.
    Kuz’min, V.V. and Kalyakulin, S.Yu., Information processing during automated calculation of technological parameters, Avtom. Sovrem. Tekhnol., 2015, no. 9, pp. 13–16.Google Scholar
  4. 4.
    Kuz’min, V.V. and Kalyakulin, S.Yu., Automated calculation of technological parameters in CAD software, Spravochnik. Inzh. Zh., 2015, no. 10, pp. 32–34.Google Scholar
  5. 5.
    Shchekin, A.V., Mitin, E.V., and Sul’din, S.P., Library of parametric hob models in the KOMPAS system, Russ. Eng. Res., 2014, vol. 34, no. 5, pp. 321–325.CrossRefGoogle Scholar
  6. 6.
    Shchekin, A.V., Mitin, E.V., and Sul’din, S.P., Structure of the library of parametric gear-cutter models in the KOMPAS system, Russ. Eng. Res., 2014, vol. 34, no. 11, pp. 701–704.CrossRefGoogle Scholar
  7. 7.
    Shchekin, A.V., Mitin, E.V., and Sul’din, S.P., CAD-assisted hob design, Russ. Eng. Res., 2013, vol. 33, no. 5, pp. 279–281.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Ogarev Mordovian State UniversitySaranskRussia
  2. 2.Stankin Moscow State Technical UniversityMoscowRussia

Personalised recommendations