Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 1003–1008 | Cite as

Improving Cutter Performance in Turning Complex Profiles

  • E. A. KudryashovEmail author
  • I. M. Smirnov
  • Yu. S. Stepanov
  • N. A. Khizhnyak
Article
  • 2 Downloads

Abstract—Recommendations for expanding the applicability of tool materials in the discontinuous turning of complex parts and heterogeneous subassemblies are developed on the basis of the requirements on three modules that constitute the cutting tool: the tool module, the adjustment module, and the damping module.

Keywords:

turning discontinuous cutting cutters tool materials complex workpieces subassemblies damping tool life tool performance 

Notes

REFERENCES

  1. 1.
    Grigor’ev, S.N., Volosova, M.A., Maslov, A.R., et al., Vysokoeffektivnye tekhnologii obrabotki (Advanced Processing Technologies), Grigor’ev, S.N., Ed., Moscow: Mashinostroenie, 2014.Google Scholar
  2. 2.
    Borovskii, G.V., Instrumental’noe proizvodstvo v Rossii (Tool Manufacturing in Russia), Moscow: Vseross. Nauchno-Issled. Instrum. Inst., 2008.Google Scholar
  3. 3.
    Kugul’tinov, S.D., Koval’chuk, A.K., and Portnov, I.I., Tekhnologiya obrabotki konstruktsionnykh materialov (Processing Technology of Construction Materials), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2010.Google Scholar
  4. 4.
    Berdnikov, L.N., Bez”yazychnyi, V.F., Krylov, V.N., et al., Spravochnik frezerovshchika (Handbook of Miller), Bez”yazychnyi, V.F., Ed., Moscow: Mashinostroenie, 2010.Google Scholar
  5. 5.
    Instrumenty iz sverkhtverdykh materialov (Tools for Superhard Materials), Novikov, N.V. and Klimenko, S.A., Eds., Moscow: Mashinostroenie, 2014.Google Scholar
  6. 6.
    Kudryashov, E.A., Altukhov, A.Yu., and Yatsun, E.I., Effective use of composite tool during interrupted cutting, Fundam. Prikl. Probl. Tekhn. Tekhnol., 2011, no. 6, pp. 79–82.Google Scholar
  7. 7.
    Grigor’ev, S.N., Kokhomskii, M.V., and Maslov, A.R., Instrumental’naya osnastka stankov s ChPU: Spravochnik (Tool Rope of CNC Machines: Handbook), Maslov, A.R., Ed., Moscow: Mashinostroenie, 2006.Google Scholar
  8. 8.
    Borovskii, G.V., Grigor’ev, S.N., and Maslov, A.R., Spravochnik instrumental’shchika (Handbook of Tool Maker), Maslov, A.R., Ed., Moscow: Mashinostroenie, 2005.Google Scholar
  9. 9.
    Grzesik, W., Zak, K., and Chudy, R., Influence of tool nose radius on the cutting performance and surface finish during hard turning with CBN cutting tools, J. Mach. Eng., 2017, vol. 17, no. 2, pp. 56–64.Google Scholar
  10. 10.
    Yatsun, E.I., Malykhin, V.V., Zubkova, O.C., et al., Instrumental’noe obespechenie protsessov mekhanicheskoi obrabotki tverdymi splavami i kompozitami: monografiya (Instruments for Mechanical Processing by Hard Alloys and Composites: Monograph), Kursk: Universitetskaya Kniga, 2016.Google Scholar
  11. 11.
    Kudryashov, E.A., Yatsun, E.I., Pavlov, E.V., and Remnev, A.I., Formation of the cutting part of energysaving combined tools, Trudy XVIII mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Mashinostroenie i tekhnosfera XXI veka” (Proc. XVIII Int. Sci.-Tech. Conf. “Machine Engineering and Technologies of 21st Century”), Donetsk: Donetsk. Nats. Tekh. Univ., 2011, vol. 3, pp. 231–234.Google Scholar
  12. 12.
    Yatsun, E.I., Remnev, A.I., Kudryashov, E.A., et al., Model range of energy saving tools, Kompressornoe Energ. Mashinostr., 2011, no. 2 (24), pp. 50–53.Google Scholar
  13. 13.
    Kudryashov, E.A., Smirnov, I.M., Yatsun, E.I., and Pavlov, E.V., Improved tools for the turning of complex surfaces, Russ. Eng. Res., 2018, vol. 38, no. 3, pp. 223–228.CrossRefGoogle Scholar
  14. 14.
    Kudryashov, E.A. and Smirnov, I.M., Application of the cutting tool control method to improve the efficiency of the interrupted cutting, Izv. Yugo-Zapad. Gos. Univ., Ser.: Tekh. Tekhnol., 2013, no. 4, pp. 23–28.Google Scholar
  15. 15.
    Novikov, S.G., Malykhin, V.V., Yatsun, E.I., Kudryashov, E.A., Pavlov, E.V., Fadeev, A.A., and Domarev, N.V., RF Patent 2457078, Byull. Izobret., 2012, no. 21.Google Scholar
  16. 16.
    Novikov, S.G., Malykhin, V.V., Yatsun, E.I., Kudryashov, E.A., and Domarev, N.V., RF Patent 2479385, Byull. Izobret., 2013, no. 11.Google Scholar
  17. 17.
    Kudryashov, E.A., Smirnov, I.M., and Khizhnyak, N.A., RF Patent 178436, 2017.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • E. A. Kudryashov
    • 1
    Email author
  • I. M. Smirnov
    • 1
  • Yu. S. Stepanov
    • 2
  • N. A. Khizhnyak
    • 1
  1. 1.AO Scientific-Research Engineering InstituteBalashikhaRussia
  2. 2.Education–Science–Production Complex (State University)OrelRussia

Personalised recommendations