Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 1018–1021 | Cite as

Improved Precision of Trapezoidal Thread

  • V. A. GrechishnikovEmail author
  • Yu. E. PetukhovEmail author
  • V. B. RomanovEmail author
  • A. V. IsaevEmail author
  • P. V. DomninEmail author
  • P. M. PivkinEmail author
Article
  • 4 Downloads

Abstract

A shaping method is proposed for cutting a trapezoidal thread on a spindle shaft. This method offers the possibility of using cutters with the same profile in cutting threads of different inclination, depending on the corresponding tolerances.

Keywords:

trapezoidal thread thread cutting spindle shaft adjustment screw tool design 

Notes

REFERENCES

  1. 1.
    GOST (State Standard) 24737–81: Basic Norms of Interchangeability. Trapezoidal Single-Start Screw Thread. Basic Dimensions, Moscow: Izd. Standartov, 1981.Google Scholar
  2. 2.
    GOST (State Standard) 24738–81: Basic Norms of Interchangeability. Trapezoidal Single-Start Screw Thread. Diameters and Pitches, Moscow: Izd. Standartov, 1981.Google Scholar
  3. 3.
    GOST (State Standard) 24739–81: Basic Norms of Interchangeability. Trapezoidal Multistart Screw Thread, Moscow: Izd. Standartov, 1981.Google Scholar
  4. 4.
    Isaev, A., Grechishnikov, V., Petuhov, Yu., and Peretya-gin, P., Structure and machinability of thin-walled parts made of titanium alloy powder using electron beam melting technology, IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 123, no. 012044.Google Scholar
  5. 5.
    Isaev, A., Grechishnikov, V., Pivkin, P., et al., Physical mechanism of ultrasonic machining, IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 123, no. 012045.Google Scholar
  6. 6.
    Isaev, A.V., Grechishnikov, V.A., Pivkin, P.M., et al., Machining of thin-walled parts produced by additive manufacturing technologies, Proc. CIRP, 2016, vol. 48, pp. 1023–1026.Google Scholar
  7. 7.
    Grechishnikov, V.A., Khusainov, R.M., Yurasov, S.Yu., and Khaziev, R.R., Reliability in gear shaping, Russ. Eng. Res., 2016, vol. 36, no. 9, pp. 791–795.CrossRefGoogle Scholar
  8. 8.
    Grechishnikov, V.A., Petukhov, Y.E., Isaev, A.V., et al., Lathe turning of complex-shaped parts providing desired surface microrelief, Russ. Eng. Res., 2016, vol. 36, no. 3, pp. 229–231.CrossRefGoogle Scholar
  9. 9.
    Grechishnikov, V.A., Khusainov, R.M., Akhkiyamov, D.R., and Yurasova, O.I., Identifying the primary rigidity axes in the elastic system of a metal-cutting machine, Russ. Eng. Res., 2016, vol. 36, no. 8, pp. 673–676.CrossRefGoogle Scholar
  10. 10.
    Isaev, A., Grechishnikov, V., Pivkin, P., et al., Structure and machinability of thin-walled parts made of titanium alloy powder using electron beam melting technology, J. Silic.-Based Compos. Mater., 2016, vol. 68, no. 2.Google Scholar
  11. 11.
    Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Prediction and measurement of the parameters of the microtopography of a surface when turning intricately shaped parts, Meas. Tech., 2015, vol. 58, no. 8, pp. 848–853.CrossRefGoogle Scholar
  12. 12.
    Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., Tool system for face grooving using CNC machines, Russ. Eng. Res., 2015, vol. 35, no. 11, pp. 814–817.CrossRefGoogle Scholar
  13. 13.
    Grechishnikov, V.A., Pivkin, P.M., and Isaev, A.V., Improving the precision of complex parts in external turning, Russ. Eng. Res., 2015, vol. 35, no. 12, pp. 892–895.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Stankin Moscow State Technical UniversityMoscowRussia

Personalised recommendations