Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 1009–1011 | Cite as

Temperature Rise in the Cutting Zone during the High-Speed Milling of Heat-Resistant Alloys

  • A. Yu. AlbagachievEmail author
  • E. V. Preobrazhenskaya
  • A. S. Krasko
  • E. S. Stramtsova
Article
  • 2 Downloads

Abstract

The temperature rise in the cutting zone during high-speed milling is considered. A method of calculating this temperature rise is proposed.

Keywords:

high-speed milling heat-resistant alloys cutting zone temperature variation 

Notes

REFERENCES

  1. 1.
    Albagachiev, A.Yu., Preobrazhenskaya, E.V., and Krasko, A.S., A model of high-speed cutting of KhN77TYuR steel, Materialy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Informatika i tekhnologii. Innovatsionnye tekhnologii v promyshlennosti i informatike” (Proc. Int. Sci.-Tech. Conf. “Informatics and Technologies. Advanced Technologies in Industry and Informatics”), Bulatov, M.F., Ed., Moscow: Mosk. Tekhnol. Univ., Fiz.-Tekhnol. Inst., 2017, no. 23, pp. 188–190.Google Scholar
  2. 2.
    Lut’yanov, A.V. and Stramtsova, E.S., Optimal temperature in milling of monowheel of the AI-222-25 turbojet engine, Evolutio. Tekh. Nauki, 2017, no. 8, pp. 49–51.Google Scholar
  3. 3.
    Albagachiev, A.Yu., Preobrazhenskaya, E.V., and Krasko, A.S., A model of high-speed cutting of KhN77TYuR steel, Materialy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Informatika i tekhnologii. Innovatsionnye tekhnologii v promyshlennosti i informatike” (Proc. Int. Sci.-Tech. Conf. “Informatics and Technologies. Advanced Technologies in Industry and Informatics”), Bulatov, M.F., Ed., Moscow: Mosk. Tekhnol. Univ., Fiz.-Tekhnol. Inst., 2017, no. 23, pp. 188–190.Google Scholar
  4. 4.
    Esov, V.B., Klimochkin, K.O., Khanov, A.M., and Khurmatullin, O.G., The application of ionized air cooling technology in high-speed milling, Vestn. Permsk. Nats. Issled. Politekh. Univ., 2011, vol. 13, no. 4, pp. 103–105.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • A. Yu. Albagachiev
    • 1
    Email author
  • E. V. Preobrazhenskaya
    • 2
  • A. S. Krasko
    • 2
  • E. S. Stramtsova
    • 2
  1. 1.Moscow Technological University, Institute of Mechanical Engineering, Russian Academy of SciencesMoscowRussia
  2. 2.Moscow Technological UniversityMoscowRussia

Personalised recommendations