Advertisement

Russian Engineering Research

, Volume 38, Issue 11, pp 889–891 | Cite as

Surface Quality after High-Speed Grinding

  • D. S. RechenkoEmail author
  • B. P. GritsenkoEmail author
  • Yu. V. TitovEmail author
  • V. A. Sergeev
  • G. Zh. NogaibekovaEmail author
Article
  • 10 Downloads

Abstract

In producing machine parts from the hard materials used today in the military–industrial complex, attainment of the required precision is difficult and sometimes unfeasible unless finishing operations are employed. In general, finishing operations are expensive and slow and they require highly skilled workers and specialized equipment. That considerably increases the production costs. Finishing operations can only be eliminated if the cutters used in the prior machining processes ensure satisfactory surface quality. However, that is not always the case, on account of bluntness of the tool. In the present work, attention focuses on the precision that may be attained in machining key components made of hard materials when using high-quality hard-alloy cutters produced by ultrahigh-speed grinding.

Keywords:

surface quality superfast sharpening metal-cutting tools precision components hard alloys 

Notes

REFERENCES

  1. 1.
    Gakh, V.M., Strengthening rounding of the edges of the carbide tool by the volumetric vibration processing, Vestn. Mashinostr., 1975, no. 12, pp. 44–47.Google Scholar
  2. 2.
    Ivanov, V.A., Nikitkov, N.V., Vakser, D.B., et al., High-speed flat grinding of ceramics by diamond cups, Sint. Almazy, 1975, no. 1, pp. 52–55.Google Scholar
  3. 3.
    Korchak, S.N., Skorostnoe shlifovanie (High-Speed Grinding), Chelyabinsk, 1958.Google Scholar
  4. 4.
    Potapov, V.A. and Aizenshtok, G.I., Vysokoskorostnaya obrabotka (High-Speed Treatment), Moscow, 1986.Google Scholar
  5. 5.
    Reznik, N.E., Study of blade edges by scanning electron microscopy, Mekh. Elektrif. Sel’sk. Khoz., 1955, no. 5, pp. 9–12.Google Scholar
  6. 6.
    Sinopal’nikov, V.A. and Eikhmans, E.F., Rounding radius of the cutting edges of a hard alloy tool, Stanki Instrum., 1965, no. 6, pp. 35–37.Google Scholar
  7. 7.
    Filimonov, L.N., Vysokoskorostnoe shlifovanie (High-Speed Grinding), Leningrad: Mashinostroenie, 1979.Google Scholar
  8. 8.
    Filimonov, L.N., Stoikost’ shlifoval’nykh krugov (Stability of Grinding Wheels), Leningrad: Mashinostroenie, 1973.Google Scholar
  9. 9.
    Wang, C., Fang, Q., Chen, J., et al., Subsurface damage in high-speed grinding of brittle materials considering kinematic characteristics of the grinding process, Int. J. Adv. Manuf. Technol., 2016, vol. 83, pp. 937–948.CrossRefGoogle Scholar
  10. 10.
    Zhu, Y., Lu, W., Sun, Y., and Zuo, D., Grinding characteristics in high-speed grinding of boron-diffusion-hardened TC21-DT titanium alloy with vitrified CBN wheel, Int. J. Adv. Manuf. Technol., 2017, vol. 89, nos. 5–8, pp. 1269–1277.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Omsk State Technical UniversityOmskRussia
  2. 2.Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of SciencesTomskRussia
  3. 3.Tomsk Polytechnic UniversityTomskRussia

Personalised recommendations