Russian Engineering Research

, Volume 38, Issue 11, pp 886–888 | Cite as

Formalization of Automated Base Selection in the Design of Machining Processes

  • E. V. Mitin
  • S. P. Sul’din
  • D. V. Okunev


Methods of formalizing automated base selection in the design of machining processes are analyzed. Such methods are necessary in developing CAD systems for manufacturing processes.


base selection formalized procedures automation technological constraints CAD systems process design machining manufacturing 



  1. 1.
    Chelishchev, B.E., Bobrova, I.V., and Gonsales, A., Avtomatizatsiya proektirovaniya tekhnologii v mashinostroenii (Automatic Design in Machine Engineering), Moscow: Mashinostroenie, 1987.Google Scholar
  2. 2.
    Mitin, E.V., 3D modeling of automated choice of technological processes, Cand. Sci. (Eng.) Dissertation, Moscow: Moscow State Technol. Univ., 2005.Google Scholar
  3. 3.
    Starostin, V.G. and Lelyukhin, V.E., Formalizatsiya proektirovaniya protsessov obrabotki rezaniem (Formalization of Design of Cutting Processes), Moscow: Mashinostroenie, 1986.Google Scholar
  4. 4.
    Kuz’min, V.V., Skhirtladze, A.G., and Usov, S.V., Matematicheskoe modelirovanie tekhnologicheskikh protsessov v mashinostroenii (Mathematical Modeling of Technological Processes in Machine Engineering), Moscow: Slavyanskaya Shkola, 2002.Google Scholar
  5. 5.
    Sul’din, S.P., Mitin, E.V., and Shchekin, A.V., Automatic design of technological documentation using the KOMPAS system, Vestn. Mashinostr., 2013, no. 7, pp. 80–83.Google Scholar
  6. 6.
    Shchekin, A.V., Mitin, E.V., and Sul’din, S.P., Library of parametric hob models in the KOMPAS system, Russ. Eng. Res., 2014, vol. 34, no. 5, pp. 321–325.CrossRefGoogle Scholar
  7. 7.
    Kuz’min, V.V. and Kalyakulin, S.Yu., Automated calculation of parameters of technological processes in CAD TP, Spravochnik. Inzh. Zh., 2015, no. 10 (223), pp. 32–33.Google Scholar
  8. 8.
    Kalyakulin, S.Yu. and Kuz’min, V.V., Information models of communications for the automation of calculations of process parameters, Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Stankin, 2015, no. 2 (33), pp. 89–92.Google Scholar
  9. 9.
    Kalyakulin, S.Yu., Algorithm for calculating the parameters of the initial blank in the SITEP MO automated design system, Russ. Eng. Res., 2014, vol. 34, no. 11, pp. 713–715.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Ogarev Mordovian State UniversitySaranskRussia

Personalised recommendations