Advertisement

Coronoelectrets based on polypropylene composites dispersed by a TlIn x Ce1 − x Se2 semiconductor filler

  • A. M. Magerramov
  • M. A. Nuriev
  • I. A. Veliev
  • S. I. Safarova
Equipment and Installations

Abstract

The electret properties in the heterogeneous polymer-semiconductor system have been investigated by the method of the electret-thermal analysis (ETA) of the PP composites with TlInSe2 and TlIn x Ce1 − x Se2 semiconductor fillers. It is shown that a small change in the filler structure causes a significant alteration of the spectrum of the thermostimulated depolarization currents. As the investigation shows, the TlInSe2 and TlIn x Ce1 − x Se2 fillers having the p-type conductivity play the role of the structure-forming agent in the polypropylene matrix changing the structure of the polymer and the near-boundary layer of the polymer and the filler.

Keywords

Filler Content Apply Electrochemistry Surface Engineer High Temperature Peak Filler Structure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Goel, M., Elecret Sensors, Filters and MEMS Devices: New Challenges in Materials Research, Curr. Science, 2003, v. 85, no. 4, pp. 443–543.MathSciNetGoogle Scholar
  2. 2.
    Electret Polymer Curing Film (Applicator) “POLIMEDEL”. Registration Certificate no. FS 01011993/3169-06, 2006.Google Scholar
  3. 3.
    Electrets, Sesler, G., Ed., Moscow: Mir, 1983, p. 487.Google Scholar
  4. 4.
    Lushcheikin, G.A., Polimernye elektrety (Polymer Electrets), Moscow: Khimiya, 1984, p. 184.Google Scholar
  5. 5.
    Galikhanov, M.F., Muzibullin, M.N., and Deberdeev, R.Ya, Study of Coronoelectrets on the Basis of Mixtures of Polyethylene with Polyvinylchloride, Plast. Massy, 2005, no. 3, pp. 8–10.Google Scholar
  6. 6.
    Galikhanov, M.F., Eremeev, D.A., and Deberdeev, R.Ya., Influence of Carbon Black on the Elecret Effect in Polystyrene, Plast. Massy, 2003, no. 10, pp. 46–48.Google Scholar
  7. 7.
    Magerramov, A.M., Strukturnoe i radiatsionnoe modifitsirovanie elektretnykh, p’ezoelektricheskikh svoistv polimernykh kompozitov (Structural and Radioactive Modification of Electret, Piezoelectric Properties of Polymer Composites), Baku: Elm, 2001, p. 327.Google Scholar
  8. 8.
    Godzhaev, E.M., Magerramov, A.M., Osmanova, S.S., Nuriev, M.A., and Allakhyarov, E.A., Charge State of Composites on the Basis of Polyethylene with TeInSe2 Semiconductor Filler, Electr. Obrab. Mater., 2007, no. 2, pp. 84–88.Google Scholar
  9. 9.
    Godzhaev, E.M., Ragimov, R.S., and Rustamov, V.D., Optic Switchers on the Basis of TlInSe2 Single Crystals, Trudy XVIII mezhdunarodnoi nauchno-tekhnicheskoi konferentsii po fotoelektronike i priboram nochnogo videniya (Proc. XVIII Int. Conf. on Photoelectronics and Night Vision Devices), Moscow, 2004, pp. 110–111.Google Scholar
  10. 10.
    Godzhaev, E.M., Magerramov, A.M., Nuriev, M.A., and Safarova, S.I., Dielectric Properties of Polymer Composites with TlInSe2 Semiconductor Filler, Electr. Obrab. Mater., 2008, no. 6, pp. 66–70.Google Scholar

Copyright information

© Allerton Press, Inc. 2010

Authors and Affiliations

  • A. M. Magerramov
    • 1
  • M. A. Nuriev
    • 1
  • I. A. Veliev
    • 1
  • S. I. Safarova
    • 1
  1. 1.Institute of Radiation ResearchAcademy of Science of AzerbaijanBakuAzerbaidjan

Personalised recommendations