Advertisement

Russian Agricultural Sciences

, Volume 44, Issue 5, pp 490–492 | Cite as

High-Frequency Electric Shearing Unit for Sheep

  • S. A. Solovyov
  • M. S. Turgenbaev
  • A. N. RusakovEmail author
Mechanization
  • 3 Downloads

Abstract

A comparative analysis of sheep-shearing machines has been performed. Advantages and disadvantages of shearing machines with a single-phase commutator motor compared to a three-phase asynchronous electric motor with a short-circuited rotor are identified. An individual electric shearing unit with the improved converter and upgraded cutting machine with a vertical push mechanism is offered. This assembly equipment increases the efficiency of shearing the sheep due to the improved characteristics of the converter and the working parts of the shearing machine. The frequency converter has an energy saving function reducing the energy losses. The weight of the improved converter compared to the prototype is decreased by 2.1 kg. The vertical push mechanism gives a threefold reduction in the uneven pressing of the knife to the comb in a sharing machine. Comparative analysis of sheep-shearing machines has been performed. Advantages and disadvantages of shearing machines with a single-phase commutator motor compared to the three-phase asynchronous electric motor with a short-circuited rotor are identified. An individual electric shearing unit with the improved converter and upgraded cutting machine with a vertical push mechanism is offered. This assembly equipment increases the efficiency of shearing the sheep due to the improved characteristics.

Keywords

sheep shearing machines commutator and asynchronous electric motors energy saving 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Turgenbaev, M.S. and Rusakov, A.N., Promising technologies and technical means of electromechanical sheep shearing, S-kh. Tekh.: Obsluzhivanie Remont, 2018, nos. 1–2, pp. 36–44.Google Scholar
  2. 2.
    Rusakov, A.N., Maintenance of shearing machines in peasant farms, Tr. Gos. Nauchno-Issled. Tekhnol. Inst. Remonta Ekspl. Trakt. S-kh. Mash., 2018, vol. 130, pp. 68–73.Google Scholar
  3. 3.
    Aleksenko, N.P., Ponomarenko, N.V., and Shishina, I.A., Improving the reliability and prospects for the production of shearing machines in Russia, Vestn. Agroprom. Kompleksa Stavrop., 2014, no. 2, pp. 12–14.Google Scholar
  4. 4.
    Suyunchaliev, R.S. and Turgenbaev, M.S., The concept of improvement of shearing units with high-frequency electric drive, Vestn. Vseross. Nauchno-Issled. Inst. Elektr. Sel’sk. Khoz., 2016, no. 1, pp. 79–83.Google Scholar
  5. 5.
    Rusakov, A.N. and Gerasimov, V.S., Modernized shearing machine for sheep, Sel’sk. Mekh., 2014, no. 5, pp. 26–27.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • S. A. Solovyov
    • 1
  • M. S. Turgenbaev
    • 1
  • A. N. Rusakov
    • 1
    Email author
  1. 1.VIM Federal Scientific Engineering CenterMoscowRussia

Personalised recommendations