Advertisement

Journal of Friction and Wear

, Volume 39, Issue 6, pp 539–547 | Cite as

Low-Modulus Carbon Fibers for Antifriction Сarbon Plastics

  • V. E. Bakhareva
  • I. G. GoryachevaEmail author
  • I. V. Lishevitch
  • I. V. Nikitina
Article

Abstract

The effect of nanostructures of low-modulus carbon fibers and the properties of the epoxy matrix of antifriction carbon plastics on the processes occurring during frictional interaction with stainless steel in an aqueous medium is considered. The reasons for high tribological characteristics of antifriction carbon plastics based on low-modulus carbon fibers are explained. It is shown that the high antifriction properties and wear resistance of such carbon plastics are due to the structure of low-modulus carbon fibers, high sorption capacity of the carbon plastics, and formation of a graphite-like film in the friction zone.

Keywords:

sliding bearings antifriction carbon plastics nanostructure fiber porosity water resistance lubricant friction coefficient 

Notes

ACKNOWLEDGMENTS

This work was supported in part by the Russian Foundation for Basic Research (project 17-01-003521).

REFERENCES

  1. 1.
    Rubin, M.B. and Bakhareva, V.E., Podshipniki v sudovoi tekhnike: Spravochnik (Bearings in Ship Equipment: Handbook), Leningrad: Sudostroenie, 1987.Google Scholar
  2. 2.
    Bakhareva, V.E. and Nikolaev, G.I., Sovremennye mashinostroitel’nye materialy. Nemetallicheskie materialy (Modern Machine Engineering Materials. Nonmetal Materials), St. Petersburg: Professional, 2014.Google Scholar
  3. 3.
    Bakhareva, V.E. and Oryshchenko, A.S., Ugleplastiki dlya detalei i uzlov treniya oborudovaniya, rabotayushchego v usloviyakh Arktiki i Krainego Severa (Carbon Plastics for the Parts and Friction Knots in Equipment Operated in Arctic and Extreme North), St. Petersburg: Professional, 2017.Google Scholar
  4. 4.
    Bakhareva, V.E., Nikolaev, G.I., and Oryshchenko, A.S., Antifriction carbon plastics in the machinery construction, Inorg. Mater.: Appl. Res., 2013, vol. 4, no. 6, pp. 508–517.CrossRefGoogle Scholar
  5. 5.
    Bezruk, A.I. and Khoreva, G.B., Carbon fiber as an example of a self-reinforced composite, Mech. Compos. Mater., 1982, vol. 18, no. 3, pp. 255–259.Google Scholar
  6. 6.
    Gorina, V.A. and Cheblakova E.G., Influence of activation modes on the specific surface and development of a microporous structure of viscose-based carbon fibers, Russ. J. Non-Ferrous Met., 2016, vol. 57, no. 7, pp. 734–738.CrossRefGoogle Scholar
  7. 7.
    Levit, R.M., Production, research, and application of carbon fibers and fibrous materials with controlled electrical properties, Doctoral (Eng.) Dissertation, Moscow: Khimvolokno, 1987.Google Scholar
  8. 8.
    Reitlinger, S.A., Pronitsaemost’ polimernykh materialov (Permeability of Polymeric Materials), Moscow: Khimiya, 1974.Google Scholar
  9. 9.
    Fridman, L.I., Carbon-fibre adsorbents. Theoretical principles of production and conduct of sorption processes, Fibre Chem., 2011, vol. 42, no. 5, pp. 300–304.CrossRefGoogle Scholar
  10. 10.
    Bonfield, W.E., Edwarks, B.S., Markham, A.J., and White, J.R., Wear transfer films formed by carbon fibre reinforced epoxy resin sliding on stainless steel, Wear, 1976, vol. 37, no. 1, pp. 113–121.CrossRefGoogle Scholar
  11. 11.
    Makhovskaya, Yu.Yu. and Goryacheva, I.G., Modeling of soft phase transfer to the surface of multicomponent aluminum alloy in friction, Phys. Mesomech., 2016, vol. 19, no. 3, pp. 239–247.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • V. E. Bakhareva
    • 1
  • I. G. Goryacheva
    • 2
    Email author
  • I. V. Lishevitch
    • 1
  • I. V. Nikitina
    • 1
  1. 1.Academician I.V. Gorynin Central Research Institute of Structural Materials “Prometey”, National Research Centre “Kurchatov Institute”St. PetersburgRussia
  2. 2.Ishlinsky Institute for Problems in Mechanics, Russian Academy of SciencesMoscowRussia

Personalised recommendations