Advertisement

Journal of Friction and Wear

, Volume 39, Issue 5, pp 422–426 | Cite as

Wear-Resistance, Hardness, and Microstructure of Deposits with a High Chrome Content

  • I. A. Rastegaev
  • V. A. Korotkov
  • M. A. Afanasyev
  • D. L. Merson
Article
  • 17 Downloads

Abstract

The microstructure, hardness, and wear resistance of surface deposited layers made of experimental 20Cr16 and 26Cr16 wires on 55Mn steel were investigated. It was shown that during crystallization, these deposited layers, having very high hardness, did not form cracks and/or other defects typical of high-strength deposits. The absence of dendrites and lack of significant chemical composition gradients across the overall section ensures that they are microstructurally uniform in depth, and therefore, their hardness and wear resistance is also independent of layer depth. The latter properties appeared to be only slightly dependent on the type of wires used, despite their significant difference in carbon content. The results make it possible to consider the designed experimental wires as highly promising for practical application in industry.

Keywords:

recovery of machine components deposit chromium steel hardness friction wear wear resistance 

Notes

ACKNOWLEDGEMENTS

The work was performed under the financial support of the Ministry of Education and Science of the Russian Federation, project no 11.8236.2017/9.10.

REFERENCES

  1. 1.
    Lebedeva, A.P. and Pogorelov, T.N., Vosstanovlenie detalei mashin (Restoration of Machine Parts), Moscow: Nauka, 2003.Google Scholar
  2. 2.
    Zhgunov, M.A., Restoration and strengthening of hydraulic plungers, Remont. Vosstanovlenie. Modernizatsiya, 2005, no. 11, pp. 29–33.Google Scholar
  3. 3.
    Korotkov, V.A., Mikhailov, I.D., and Babailov, D.S., Surfacing on CCM rolls, Svar. Proizvod., 2007, no. 1, pp. 30–31.Google Scholar
  4. 4.
    Korotkov, V.A., Zotov, A.S., Golovizin, L.B., et al., Automated surfacing of auto-couplers, Svar. Proizvod., 2005, no. 9, pp. 15–18.Google Scholar
  5. 5.
    Gulyaev, A.P., Metallovedenie (Metal Science), Moscow: Metallurgiya, 1986.Google Scholar
  6. 6.
    Semenova, I.V., Florianovich, G.M., and Khoroshilov, A.V., Korroziya i zashchita ot korroziya (Corrosion and Anticorrosive Measures), Moscow: Fizmatlit, 2002.Google Scholar
  7. 7.
    Rastegaev, I.A. and Afanasyev, M.A., Evaluation of the results of tribological tests by laser scanning confocal microscopy, Izv. Samar. Nauch. Tsentra, Ross. Akad. Nauk, 2015, vol. 17, no. 1, pp. 187–190.Google Scholar
  8. 8.
    Konovalov, A.V., Kurkin, A.S., Makarov, E.L., et al., Teoriya svarochnykh protsessov (Theory of Welding Processes), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2007.Google Scholar
  9. 9.
    Vasil’ev, N.P., The anisotropy of the wear resistance of the weld metal, Svar. Proizvod., 1980, no. 5, pp. 21–22.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • I. A. Rastegaev
    • 1
  • V. A. Korotkov
    • 2
  • M. A. Afanasyev
    • 1
  • D. L. Merson
    • 1
  1. 1.Tolyatti State UniversityTolyattiRussia
  2. 2.Nizhny Tagil Technological Institute, Ural Federal UniversityNizhny TagilRussia

Personalised recommendations