Advertisement

Journal of Machinery Manufacture and Reliability

, Volume 47, Issue 6, pp 550–556 | Cite as

Effect of Laser Strengthening and Beam Defocusing on the Geometrical Parameters of Hardened Zones

  • V. P. BiryukovEmail author
New Technologies in Mechanical Engineering
  • 1 Downloads

Abstract

The paper presents the results of metallographic studies of the geometric parameters of hardened zones depending on the laser processing mode. Based on the results of regression analysis, plots were constructed for surfaces showing the effect of the power, velocity, and transverse oscillations of the beam on the width and depth of hardened zones. High-frequency beam scanning increases the performance of laser hardening by 1.6–2.5 times.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Matveev, Yu.I., Lazernye tekhnologii v sudovom mashinostroenii (Laser Technology in Marine Engineering), N. Novgorod: GOU VPO VGAVT, 2003.Google Scholar
  2. 2.
    Biryukov, V.P. and Dozorov, A.V., Laser systems for hardening and surfacing of parts and for precise sheet layout, J. Mach. Manuf. Reliab., 2006, no. 1, pp. 46–50.Google Scholar
  3. 3.
    Biryukov, V.P., Drozdov, Yu.N., Gudushauri, E.G., Mikhailin, B.N., and Fishkov, A.A., The method of quenching the surface layers of flat long steel products, RF Patent No. 2449028, 2012.Google Scholar
  4. 4.
    Biryukov, V.P. and Matytsyn, A.P., Hardening of machine parts with a scanning laser beam, in Primenenie lazerov v narodnom khozyaistve, Tezisy dokladov (Proceedings of the Conference on Laser Application in the National Economy, Dec. 4–8, 1989), Shatura: NITsTLAN, 1989, p. 82.Google Scholar
  5. 5.
    Shlegel', A.N., Selection of rational modes of laser hardening of the working edges of cast-iron molds for glassforming machines, Vestn. MGTU STANKIN, 2011, no. 3, pp. 106–109.Google Scholar
  6. 6.
    Morozov, V.V., Yugov, V.I., and Shlegel’, A.N., Researches of wear capability of hardened by the laser radiation mould details edges for forming glass, Uprochn. Tekhnol. Pokryt., 2007, no. 7, pp. 52–56.Google Scholar
  7. 7.
    Lapteva, V.G., Kuksenova, L.I., and Alisin, V.V., Effect of laser treatment on the case structure of constructional steels and their wear resistance, J. Mach. Manuf. Reliab., 2009, vol. 38, no. 2, pp. 177–182.CrossRefGoogle Scholar
  8. 8.
    Kuksenova, L.I., Lapteva, V.G., Kolmakov, A.G., et al., Metody ispytanii na trenie i iznos (Methods of Friction and Wear Testing), Moscow: Intermet Inzhiniring, 2001.Google Scholar
  9. 9.
    Kuz'min, S.D., Tarasova, T.V., Belashova, I.S., et al., Influence of the degree of discrete laser treatment on wear resistance of steels and alloys, Uprochn. Tekhnol. Pokryt., 2016, no. 9, pp. 9–14.Google Scholar
  10. 10.
    Pellizzari, M. and de Flora, M.G., Influence of laser hardening on the tribological properties of forged steel for hot rolls, Wear, 2011, vol. 271, pp. 2402–2411.CrossRefGoogle Scholar
  11. 11.
    Ion, J., Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Amsterdam: Elsevier, Butterworth-Heinemann, 2005.Google Scholar
  12. 12.
    Bogdanov, A.V., Grezev, N.V., Shmelev, S.A., et al., Wheel steel strengthening with fiber lasers, Naukoemk. Tekhnol. Mashinostr., 2016, no. 9, pp. 30–37.Google Scholar
  13. 13.
    Shariff, S.M., Pal, T.K., Padmanabham, G., and Joshi, S.V., Influence of chemical composition and prior microstructure on diode laser hardening of railroad steels, Surf. Coat. Technol., 2013, vol. 228, pp. 14–26.CrossRefGoogle Scholar
  14. 14.
    Soriano, C., Leund, J., Lambarri, J., Navas, V. G., and Sanz, C., Effect of laser surface hardening on the microstructure, hardness and residual stresses of austempered ductile iron grades, Appl. Surf. Sci., 2011, vol. 257, pp. 7101–7106.CrossRefGoogle Scholar
  15. 15.
    Evdokimov, Yu.A., Kolesnikov, V.I., and Teterin, A.I., Planirovanie i analiz eksperimentov pri reshenii zadach treniya i iznosa (Planning and Analysis of Experiments in Solving Friction and Wear Problems), Moscow: Nauka, 1980.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Blagonravov Institute of Mechanical EngineeringRussian Academy of SciencesMoscowRussia

Personalised recommendations