Advertisement

Steel in Translation

, Volume 48, Issue 7, pp 478–481 | Cite as

Production of Amorphous Alloys for Cybernetic Circuits

  • B. V. Molotilov
  • G. N. EreminEmail author
  • T. A. Shestakova
Article
  • 5 Downloads

Abstract

The ways in which the manufacturing conditions affect the magnetic (domain) structure of amorphous alloy strip produced on cooled disks are studied. On that basis, the physical properties of the alloys may be optimized for their intended use.

Keywords

amorphous precision alloys production technology optimization physical properties alloy properties alloy applications 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Molotilov, B.V. and Eremin, G.N., Cybernetic applications of new precision alloys, Steel Transl., 2018, vol. 48, no. 1, pp. 63–66.CrossRefGoogle Scholar
  2. 2.
    Amorfnye splavy. Produktsiya chernoi metallurgii (Amorphous Alloys: Products of Ferrous Metallurgy), Moscow: Chermetinformatsiya, 1989.Google Scholar
  3. 3.
    Molotilov, B.V., Galkin, M.P., and Kornienkov, B.A., Developing new amorphous and nanocrystalline alloys for electronics, Steel Transl., 2015, vol. 45, no. 5, pp. 390–393.CrossRefGoogle Scholar
  4. 4.
    Borisov, V.T. and Srebryanskii, G.A., The formation of an amorphous metal strip during quenching of a melt, Metally, 1984, no. 4, pp. 82–85.Google Scholar
  5. 5.
    Pozdnyakov, V.A. and Molotilov, B.V., Analysis of the internal stress in amorphous strip and its buckling, Stal’, 2003, no. 10, pp. 67–69.Google Scholar
  6. 6.
    Kuleshov, B.M. and Tsepelev, V.S., Thermal treatment of melts before amorphization, Stal’, 1993, no. 7, pp. 69–71.Google Scholar
  7. 7.
    Zapuskalov, N.M., Molotilov, B.V., et al., RF Patent 1799674, 1992.Google Scholar
  8. 8.
    Molotilov, B.V., Zapuskalov, N.M., and Savvin, A.N., Structure and properties of a rapidly quenched finegrained Fe−Si alloy, Met. Sci. Heat Treat., 1992, vol. 34, no. 9, pp. 556–559.CrossRefGoogle Scholar
  9. 9.
    Molotilov, B.V., Zapuskalov, N.M., and Timofeev, V.T., Analysis of the geometry and quality of the surface of rapidly quenched strip, Stal’, 1991, no. 12, pp. 68–70.Google Scholar
  10. 10.
    Kornienkov, B.A., Ovcharov, V.P., and Yazvitskii, M.Yu., The production technology of the finest amorphous strip, Stal’, 2005, no. 10, pp. 94–96.Google Scholar
  11. 11.
    Molotilov, B.V., D’yakonova, N.B., Vlasova, E.N., and Lyasotskii, I.V., Metallurgical defects at the surface of amorphous strip, Stal’, 2001, no. 8, pp. 101–103.Google Scholar
  12. 12.
    Molotilov, B.V., D’yakonova, N.B., D’yakonov, D.L., et al., Influence of the physical properties of melts on the casting and forming of amorphous strips, Stal’, 2003, no. 1, pp. 99–102.Google Scholar
  13. 13.
    Molotilov, B.V., Hydrodynamic effects in the production of amorphous strips by high-speed hardening of melts, Stal’, 2006, no. 1, pp. 77–80.Google Scholar
  14. 14.
    Molotilov, B.V., Galkin, M.P., and Kornienkov, B.A., Production of amorphous electrical-engineering steel, Steel Transl., 2014, vol. 44, no. 12, pp. 939–941.CrossRefGoogle Scholar
  15. 15.
    Molotilov, B.V., Galkin, M.P., and Kornienkov, B.A., Design of new precision alloys, Steel Transl., 2016, vol. 46, no. 9, pp. 675–678.CrossRefGoogle Scholar
  16. 16.
    Makarov, V.P., Molotilov, B.V., Kuz’mishko, V.P., and Matsuk, V.G., Structural relaxation and formation of long-range magnetic order in strips from amorphous soft magnetic alloys, in Magnitnoe i atomnoe uporyadochenie v pretsizionnykh splavakh (Magnetic and Atmoic Ordering in Precision Alloys), Moscow: Metallurgiya, 1985, pp. 73–81.Google Scholar
  17. 17.
    Zusman, A.I., Ershov, N.N., and Vasil’eva, N.P., Effect of bending deformations on the magnetic properties of amorphous iron-based alloys, Izv. Akad. Nauk SSSR, Ser. Fiz., 1989, vol. 53, no. 4, pp. 659–661.Google Scholar
  18. 18.
    Kornienkov, B.A. and Molotilov, B.V., Magnetoelastic effects in amorphous alloys, Steel Transl., 2013, vol. 43, no. 3, pp. 157–159.CrossRefGoogle Scholar
  19. 19.
    Ignatchenko, V.A. and Iskhakov, R.S., Stochastic magnetic structure and spin waves in an amorphous ferromagnetics, in Fizika magnitnykh materialov (Physics of Magnetic Materials), Novosibirsk: Nauka, 1983, pp. 3–32.Google Scholar
  20. 20.
    Makarov, V.P., Molotilov, B.V., Kuz’mishko, V.P., and Ovcharov, V.P. Surface relief and domain structure of amorphous alloy strips with a magnetostriction constant different from zero, in Amorfnye pretsizionnye splavy (Amorphous Precision Alloys), Moscow: Metallurgiya, 1981, pp. 49–53.Google Scholar
  21. 21.
    Pozdnyakov, V.A., Internal stresses of different structural-scale levels in amorphous metal alloys, Izv. Ross. Akad. Nauk, Ser. Fiz., 2001, vol. 65, no. 10, pp. 1459–1464.Google Scholar
  22. 22.
    Landau, L.D. and Lifshitz, E.M., Course of Theoretical Physics, Vol. 8: Electrodynamics of Continuous Media, Oxford: Pergamon, 1963.Google Scholar
  23. 23.
    Hubert, A., Theory of Domain Walls in Ordered Media, Berlin: Springer-Verlag, 1974.Google Scholar
  24. 24.
    Kornienkov, B.A., Libman, M.A., and Molotilov, B.V., Magnetic clusters in amorphous metal alloys, Bull. Russ. Acad. Sci.: Phys., 2012, vol. 76, no. 1, pp. 51–53.CrossRefGoogle Scholar
  25. 25.
    Aktual’nye voprosy lazernoi obrabotki stalei i splavov (Laser Treatment of Steels and Alloys), Sokolov, B.K., Ed., Yekaterinburg: Ural. Otd., Inst. Fiz. Met., 1994, ch. 4, pp. 96–120.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • B. V. Molotilov
    • 1
  • G. N. Eremin
    • 1
    Email author
  • T. A. Shestakova
    • 1
  1. 1.Bardin Central Research Institute of Ferrous MetallurgyMoscowRussia

Personalised recommendations