Steel in Translation

, Volume 44, Issue 12, pp 916–920 | Cite as

Straightening of sheet with correction of waviness

  • A. V. Barabash
  • E. Yu. Gavril’chenko
  • E. P. Gribkov
  • O. E. Markov


A new method of determining the parameters of sheet straightening takes account of the flexure of the working rollers and its influence the waviness. The method is based on the combined use of an engineering model of sheet straightening and regression equations obtained by finite-element modeling of the correction of waviness. Experiments confirm the applicability of the method in automatic control systems for sheet-straightening machines.


thick rolled sheet stress-strain state mathematical modeling quality sheet-straightening machine 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Slonim, A.Z. and Sonin, A.L., Pravka listovogo i sortovogo prokata (Straightening of Rolled Sheet and Bar), Moscow: Metallurgiya. 1981.Google Scholar
  2. 2.
    Nedorezov, I.V., Orlov, B.Ya., and Vinokurskii, A.Kh., Improving roller sheet-straightening machines at AO Uralmash, Trudy pervogo Kongressa prokatchikov. Magnitogorsk, 23–27 oktyabrya, 1995 (Proceedings of the First Congress of Rolling Specialists, Magnitogorsk, October 23–27, 1995), Moscow: Chermetinformatsiya, 1996, pp. 38–42.Google Scholar
  3. 3.
    Korolev, A.A., Mekhanicheskoe oborudovanie prokatnykh i trubnykh tsekhov (Mechanical Equipment in Rolling and Pipe Shops), Moscow: Metallurgiya. 1987.Google Scholar
  4. 4.
    Lugovskoi, V.M., Calculation of sheet-straightening machines and automation of their design, Tr. VNIImetmash (Proceedings of the All-Union Research Institute of Metallurgical Machinery), Moscow: Metallurgiya. 1970, no. 26, pp. 8–30.Google Scholar
  5. 5.
    Shinkin, V.N., Parameter calculation for the straightening of steel sheet on an 11-roller straightening machine in the Fagor Arrasate transverse-cutting line, Proizv. Prokata. 2014, no. 8, pp. 26–34.Google Scholar
  6. 6.
    Park, K. and Hwang, S., Development of a finite element analysis program for roller leveling and application for removing blanking bow defects of thin steel sheet, ISIJ Intern.. 2002, vol. 42, no. 9, pp. 990–999; 10.2355/isijinternational.42.990.CrossRefGoogle Scholar
  7. 7.
    Cui, L., Hu, X., and Liu, X., Analysis of leveling strategy for a plate mill, Adv. Mater. Res.. 2011, vol. 145, pp. 424–428; http://doi: 10.4028/ Scholar
  8. 8.
    Cui, L., Hu, X., and Liu, X., Research on mathematical model of leveling process for plate mill, Adv. Mater. Res.. 2011, vol. 148/149, pp. 368–371; http://doi: 10.4028/ Scholar
  9. 9.
    Doegea, E., Menza, R., and Huininka, S., Analysis of the levelling process based on analytic forming model, CIRP Ann., Manuf. Technol., vol. 51, issue 1, pp. 191–194, doi:10.1016/S0007-8506(07)61497-8.Google Scholar
  10. 10.
    Satonin, A.V., Gribkov, E.P., and Gavril’chenko, O.A., Simulation of the stress state and quality of metal in straightening on multiroller machines, Visnik Donbas’koi derzhavnoi mashinobudivnoi akademii (Proceedings of Donetsk Basin State Manufacturing Academy), Kramatorsk: DDMA. 2010, no. 1(18), pp. 268–273.Google Scholar
  11. 11.
    Timchenko, V.V., Egorov, A.B., Saplin, S.Yu., and Titarenko, O.A., Refined method of calculating the straightening parameters for multiroller machines, Udoskonalennya protsesiv i obladnaniya obrobki tiskom v metallurgii i mashinobuduvanni (Improving Pressure-Treatment Processes and Equipment in Metallurgy and Manufacturing), Kramatorsk: DDMA. 2005, pp. 495–499.Google Scholar
  12. 12.
    Satonin, A.V., Gavril’chenko, O.A., Titarenko, A.I., and Shestopalov, A.V., Influence of temperature and geometric characteristics on the forces in the hot straightening of relatively thick sheet, Obrabotka materialov davleniem (Pressure Treatment of Materials), Kramatorsk: DGMA. 2008, no. 1(19), pp. 115–119.Google Scholar
  13. 13.
    Fedorinov, V.A., Barabash, A.V., Gavril’chenko, E.Yu., and Gribkov, E.P., Mathematical model for the adjustment of the TLS 2850 sheet-straightening machine for hot and cold straightening at Asha metallurgical plant, Obrabotka materialov davleniem (Pressure Treatment of Materials), Kramatorsk: DGMA. 2014, no. 1(38), pp. 48–53.Google Scholar

Copyright information

© Allerton Press, Inc. 2014

Authors and Affiliations

  • A. V. Barabash
    • 1
  • E. Yu. Gavril’chenko
    • 1
  • E. P. Gribkov
    • 2
  • O. E. Markov
    • 2
  1. 1.PAO NKMZKramatorskUkraine
  2. 2.Donetsk Basin State Manufacturing AcademyKramatorskUkraine

Personalised recommendations