Abstract
The extraction rates of cadmium(II) and zinc(II) with dithizone (H2dz) in the presence of nitrilotriacetic acid (NTA) were measured, and the possible kinetic separation of cadmium(II) from zinc(II) was investigated. Upon the addition of NTA, the difference in the extraction rate between cadmium(II) and zinc(II) became large. Based on the observed rate constant under the condition [NTA] = 1 × 10−2 mol dm−3, [H2dz]org = 1 × 10−3 mol dm−3, and pH = 7.0, the shaking time required for the quantitative separation of cadmium(II) from zinc(II) was calculated to be between 326 and 995 s. The experimental results agreed with the prediction, and the quantitative separation of cadmium(II) from zinc(II) was performed within the above-mentioned range of shaking times.
Similar content being viewed by others
References
H. M. N. H. Irving, “Dithizone”, 1977, The Chem. Soc., London.
J. Stary, “The Solvent Extraction of Metal Chelates”, 1964, Pergamon Press, New York, 42.
H. M. N. H. Irving, “Dithizone”, 1977, The Chem. Soc., London, 47.
H. Kawamoto, H. Itabashi, and M. Nemoto, Anal. Sci., 1995, 11, 289.
H. Itabashi, Y. Takazawa, N. Niibe, and H. Kawamoto, Anal. Sci., 1997, 13, 921.
H. M. N. H. Irving, “Dithizone”, 1977, The Chem. Soc., London, 52.
M. Tanaka, “Youbaityusyutu no Kagaku (Solvent Extraction Chemistry, in Japanese)”, 1977, Kyouritusyuppan, Tokyo, 56.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Itabashi, H., Yoshida, M. & Kawamoto, H. Kinetically Controlled Separation of Cadmium(II) from Zinc(II) with Dithizone in the Presence of Nitrilotriacetic Acid. ANAL. SCI. 17, 1301–1304 (2001). https://doi.org/10.2116/analsci.17.1301
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.2116/analsci.17.1301