概要
工业互联网的不断发展对阀门的小型化、数字化、多功能性和系统化产生了更迫切的需求。值得注意的是,如果阀门工作在高温高压环境中,或在纳米流体、压缩氢和过热蒸汽等新型流体中,阀门流动的智能控制则显得尤为重要。开发精确度高、响应速度快、参数反馈准确、远程操作方便且具有故障在线即时诊断和故障安全保障等功能的智能泵阀迫在眉睫。为此,本专辑收集了在该研究领域具有代表性的研究成果,介绍了流动控制和智能阀门实践的最新发展,希望能帮助读者快速了解智能泵阀及其流动控制技术在各个领域中的应用,推动该领域的发展,并为智能泵阀的设计制造和流动控制的实现提供科学依据和技术支撑。
Article PDF
Avoid common mistakes on your manuscript.
References
Bonilla CA, Zanfei A, Brentan B, et al., 2022. A digital twin of a water distribution system by using graph convolutional networks for pump speed-based state estimation. Water, 14(4):514. https://doi.org/10.3390/w14040514
Chang V, Xu YK, Zhang JQ, et al., 2021. Research on intelligent manufacturing development approach for China's local valve industry. Smart and Sustainable Built Environment, 10(2):293–321. https://doi.org/10.1108/Sasbe-02-2020-0014
di Capaci RB, Scali C, 2018. Review and comparison of techniques of analysis of valve stiction: from modeling to smart diagnosis. Chemical Engineering Research and Design, 130:230–265. https://doi.org/10.1016/j.cherd.2017.12.038
Fiderek P, Kucharski J, Wajman R, 2022. Fuzzy regulator for two-phase gas-liquid pipe flows control. Applied Sciences, 12(1):399. https://doi.org/10.3390/app12010399
Ji X, Wang AC, Wei XH, 2021. Precision control of spraying quantity based on linear active disturbance rejection control method. Agriculture, 11(8):761. https://doi.org/10.3390/agriculture11080761
Jin ZJ, Qiu C, Jiang CH, et al., 2020. Effect of valve core shapes on cavitation flow through a sleeve regulating valve. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 21(1):1–14. https://doi.org/10.1631/jzus.A1900528
Kang J, Yuan ZH, Li JC, 2022. Mechanism analysis and evaluation of thermal effects on the operating point drift of servo valves. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):286–302. https://doi.org/10.1631/jzus.A2100464
Lin ZH, Li JY, Jin ZJ, et al., 2021. Fluid dynamic analysis of liquefied natural gas flow through a cryogenic ball valve in liquefied natural gas receiving stations. Energy, 226:120376. https://doi.org/10.1016/J.ENERGY.2021.120376
Lin ZH, Yu LJ, Hua TF, et al., 2022. Seal contact performance analysis of soft seals on high-pressure hydrogen charge valves. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):247–256. https://doi.org/10.1631/jzus.A2100395
Lu L, Xu YP, Li MR, et al., 2022. Analysis of fretting wear behavior of unloading valve of gasoline direct injection highpressure pump. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):314–328. https://doi.org/10.1631/jzus.A2100685
Lyu F, Ye SG, Zhang JH, et al., 2021. Theoretical and simulation investigations on flow ripple reduction of axial piston pumps using nonuniform distribution of pistons. Journal of Dynamic Systems, Measurement, and Control, 143(4): 041008. https://doi.org/10.1115/1.4048859
Lyu LT, Chen Z, Yao B, 2021. Advanced valves and pump coordinated hydraulic control design to simultaneously achieve high accuracy and high efficiency. IEEE Transactions on Control Systems Technology, 29(1):236–248. https://doi.org/10.1109/TCST.2020.2974180
Mao ZB, Asai Y, Wiranata A, et al., 2022. Eccentric actuator driven by stacked electrohydrodynamic pumps. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):329–334. https://doi.org/10.1631/jzus.A2100468
Pang JH, Zhang N, Xiao Q, et al., 2021. A new intelligent and data-driven product quality control system of industrial valve manufacturing process in CPS. Computer Communications, 175:25–34. https://doi.org/10.1016/j.comcom.2021.04.022
Pedersen HC, Bak-Jensen T, Jessen RH, et al., 2022. Temperature-independent fault detection of solenoid-actuated proportional valve. IEEE/ASME Transactions on Mechatronics, in press. https://doi.org/10.1109/TMECH.2022.3158483
Peng L, Han GQ, Pagou AL, 2022. Real-time anomaly detection methodology in the electric submersible pump systems. Petroleum Science and Technology, in press. https://doi.org/10.1080/10916466.2022.2048013
Qian JY, Wu JY, Gao ZX, et al., 2020a. Effects of throttling window on flow rate through feed-water valves. ISA Transactions, 104:393–405. https://doi.org/10.1016/j.isatra.2020.05.017
Qian JY, Hou CW, Mu J, et al., 2020b. Valve core shapes analysis on flux through control valves in nuclear power plants. Nuclear Engineering and Technology, 52(10):2173–2182. https://doi.org/10.1016/j.net.2020.03.008
Shi JC, Ren Y, Tang HS, et al., 2022. Hydraulic directional valve fault diagnosis using a weighted adaptive fusion of multi-dimensional features of a multi-sensor. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):257–271. https://doi.org/10.1631/jzus.A2100394
Si QR, Lu R, Shen CH, et al., 2020. An intelligent CFDbased optimization system for fluid machinery: automotive electronic pump case application. Applied Sciences, 10(1):366. https://doi.org/10.3390/app10010366
Sun F, Xu H, Zhao YH, et al., 2022. Data-driven fault diagnosis of control valve with missing data based on modeling and deep residual shrinkage network. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):303–313. https://doi.org/10.1631/jzus.A2100598
Tang HB, Yang WX, Wang ZC, 2019. A model-based method for leakage detection of piston pump under variable load condition. IEEE Access, 7:99771–99781. https://doi.org/10.1109/ACCESS.2019.2930816
Vailati LG, Goldfarb M, 2021. A method for mass flow and displacement estimation in a pneumatic actuation system using valve-based pressure sensing. IEEE/ASME Transactions on Mechatronics, 26(1):235–245. https://doi.org/10.1109/Tmech.2020.3011348
Yu H, Li HR, Li YL, 2020. Vibration signal fusion using improved empirical wavelet transform and variance contribution rate for weak fault detection of hydraulic pumps. ISA Transactions, 107:385–401. https://doi.org/10.1016/j.isatra.2020.07.025
Yuan CG, Plummer A, Pan M, 2022. Switching characteristics of a high-speed rotary valve for switched inertance hydraulic converters. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, in press. https://doi.org/10.1177/09596518221082445
Zhang F, Zhang JH, Cheng M, et al., 2022. A flow-limited rate control scheme for the master-slave hydraulic manipulator. IEEE Transactions on Industrial Electronics, 69(5):4988–4998. https://doi.org/10.1109/Tie.2021.3084175
Zhao KP, He T, Wang CL, et al., 2022. Lubrication characteristics analysis of slipper pair of digital valve distribution axial piston pump. Advances in Mechanical Engineering, 14(3):1–15. https://doi.org/10.1177/16878132221085442
Zhong Q, Xu EG, Jia TW, et al., 2022. Dynamic performance and control accuracy of a novel proportional valve with a switching technology-controlled pilot stage. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 23(4):272–285. https://doi.org/10.1631/jzus.A2100463
Zhou CJ, Ma J, Wu JD, 2018. Fault diagnosis of check valve based on CEEMD compound screening, BSE and FCM. IFAC-Papersonline, 51(21):323–328. https://doi.org/10.1016/j.ifacol.2018.09.440
Author information
Authors and Affiliations
Corresponding authors
Additional information
Conflict of interest
Jin-yuan QIAN, Wei WU, Min CHENG, and Jun-hui ZHANG declare that they have no conflict of interest.
Introducing Guest Editor-in-Chief and Guest Editors:
Jin-yuan QIAN is presently Associate Professor in Institute of Process Equipment, College of Energy Engineering, Zhejiang University, China since 2018. He received B.S. and Ph.D. degrees both in Chemical Process Equipment from Zhejiang University in 2011 and 2016, respectively. He was a joint Ph.D. student at TU Bergakademie Freiberg, Germany from 2013 to 2014, and a Postdotorate Researcher in the Department of Energy Sciences, Lund University, Sweden from 2016 to 2017. He is an Editorial Board Member of Micromachines, and Technical Editor of Valves. His research interests include valves, flow control, and computational fluid dynamics. He has coauthored about 50 papers in international journals and conferences, and is author of over 20 patents.
Wei WU received his Ph.D. degree in mechanical engineering from Beijing Institute of Technology, China in 2010. He has been Associate Professor with the School of Mechanical Engineering, Beijing Institute of Technology since 2013. His specialty mainly focuses on vehicular dynamics, fluid power, and heat transfer. His research interests include hybrid propulsion of high-speed off-road vehicles and two-phase flow. He has published more than 60 journal papers, in which 32 papers were indexed by the Scientific Citation Index (SCI). He has authored or coauthored more than 40 National Invention Patents with 33 granted.
Min CHENG received his Ph.D. degree from Zhejiang University in 2015 and is currently an Associate Professor and Doctoral Supervisor in the School of Mechanical and Vehicle Engineering, Chongqing University, China. He is a senior member of the Chinese Society of Mechanical Engineering and an Editorial Board Member of Chinese Hydraulics & Pneumatics. His research interests are energy-saving electro-hydraulic control systems, advanced motion control strategies, and human-machine interfaces of heavy-duty hydraulic robots. He has won the China Machinery Industry Science and Technology Award (first class, 2021) and the Excellent Paper Award of the China Mechanical Engineering Society. He has published more than 50 journal and conference papers and authored or applied for over 15 patents.
Jun-hui ZHANG received B.S. and Ph.D. degrees in mechatronics from Zhejiang University, China in 2007 and 2012, respectively. He is currently a Researcher with the Institute of Mechatronics and Control Engineering, Zhejiang University. He has authored or coauthored more than 50 papers indexed by SCI and applied for more than 20 National Invention Patents with 18 granted. He is supportedby the National Science Fund for Excellent Young Scholars. His research interests include high-speed hydraulic pumps/motors and hydraulic robots. He is a Technical Editor of IEEE/ASME Transactions on Mechatronics.