Abstract
In this paper, quantitative measures for the assessment of the hydraulic excavator digging efficiency are proposed and developed. The following factors are considered: (a) boundary digging forces allowed for by the stability of an excavator, (b) boundary digging forces enabled by the driving mechanisms of the excavator, (c) factors taking into consideration the digging position in the working range of an excavator, and (d) sign and direction of potential digging resistive force. A corrected digging force is defined and a mathematical model of kinematic chain and drive mechanisms of a five-member excavator configuration was developed comprising: an undercarriage, a rotational platform and an attachment with boom, stick, and bucket. On the basis of the mathematical model of the excavator, software was developed for computation and detailed analysis of the digging forces in the entire workspace of the excavator. By using the developed software, the analysis of boundary digging forces is conducted and the corrected digging force is determined for two models of hydraulic excavators of the same mass (around 17 000 kg) with identical kinematic chain parameters but with different parameters of manipulator driving mechanisms. The results of the analysis show that the proposed set of quantitative measures can be used for assessment of the digging efficiency of existing excavator models and to serve as an optimization criterion in the synthesis of manipulator driving mechanisms of new excavator models.
Similar content being viewed by others
References
Budny, E., 1989. Probleme des optimalen entwurfs von arbeits-ausrustungen der hydraulikbagger. Maschinenbautehnik, 38(7):12–14 (in German).
Budny, E., Chlosta, M., Gutkowski, W., 2003. Loadindependent control of a hydraulic excavator. Automation in Construction, 12(3):245–254. [doi:10.1016/S0926-5805(02)00088-2]
Chang, P.H., Lee, S.J., 2002. A straight-line motion tracking control of hydraulic excavator system. Mechatronics, 12(1):119–123. [doi:10.1016/S0957-4158(01)00014-9]
Craig, J., 2005. Introduction to Robotics, Mechanics and Control. Pearson Educational International, USA.
Dudczak, A., 1977. Kryteria Doboru Parametrow Mechanizm ow Napedowych Osprzetu Koparki Hidraulicznej. Instytut Mechanizacji Budownictwa, Warszawa (in Polish).
Flores, G.F., Kecskemethy, A., Pottker, A., 2007. Workspace Analysis and Maximum Force Calculation of a Face-Shovel Excavator using Kinematical Transformers. 12th IF to MM World Congress, Besancon.
Gu, J., Taylor, J., Seward, D., 2007. Modelling of a hydraulic excavator using simplified refined instrumental variable (SRIV) algorithm. Journal of Control Theory and Applications, 5(4):391–396. [doi:10.1007/s11768-006-6180-2]
Ha, Q.P., Nguyen, Q.H., Rye, D.C., Durrant-Whyte, H.F., 2000. Impedance control of a hydraulically actuated robotic excavator. Automation in Construction, 9(5–6): 421–435. [doi:10.1016/S0926-5805(00)00056-X]
Hall, A.S., McAree, P.R., 2005. Robust bucket position tracking for a large hydraulic excavator. Mechanism and Machine Theory, 40(1):1–16. [doi:10.1016/j.mechmachtheory.2004.05.005]
ISO 6015, 2006. Earth-Moving Machinery-Hydraulic Excavators and Manipulator Loaders-Methods of Determining Tool Forces. International Organization for Standardization.
Janosevic, D., 1997. Optimal Synthesis of Drive Mechanisms in Hydraulic Excavators. PhD Thesis, Faculty of Mechanical Engineering, University of Nis, Serbia.
Lee, S.U., Chang, P.H., 2002. Control of a heavy-duty robotic excavator using time delay control with integral sliding surface. Control Engineering Practice, 10(7):697–711. [doi:10.1016/S0967-0661(02)00027-8]
Lin, X., Pan, S.X., Wang, D.Y., 2008. Dynamic simulation and optimal control strategy for a parallel hybrid hydraulic excavator. Journal of Zhejiang University SCIENCE-A, 9(5):624–632. [doi:10.1631/jzus.A071552]
Lipsett, M.G., 2009. Methods for Assessing Dynamic Performance of Shovels. Proc. 18th International Symposium Mine Planning and Equipment Selection, Banff, p.9.
Maciejewski, J., Jarzebowski, A., 2002. Laboratory optimization of the soil digging process. Journal of Terramechanics, 39(3):161–179. [doi:10.1016/S0022-4898(02)00022-8]
Maciejewski, J., Jarzebowski, A., Trampczynski, W., 2003. Study on the efficiency of the digging process using the model of excavator bucket. Journal of Terramechanics, 40(4):221–233. [doi:10.1016/j.jterra.2003.12.003]
Plonecki, L., Trampczynski, W., Cendrowicz, J., 1998. A concept of digital control system to assist the operator of hydraulic excavators. Automation in Construction, 7(5): 401–411. [doi:10.1016/S0926-5805(98)00045-4]
SAE J1179, 2008. Hydraulic Excavator and Manipulator Digging Forces. SAE International.
Towarek, Z., 2003. Dynamics of a single-bucket excavator on a deformable soil foundation during the digging of ground. International Journal of Mechanical Sciences, 45(6–7):1053–1076. [doi:10.1016/j.ijmecsci.2003.09.004]
Yang, J.X., Zhang, C.Y., Huang, H.Y., Zhang, X.F., 2008. Reducing-resistance mechanism of vibratory excavation of hydraulic excavator. Journal of Central South University of Technology, 15:535–539.
Author information
Authors and Affiliations
Corresponding author
Additional information
Project (No. 035049) partly supported by the Ministry of Education and Science of the Republic of Serbia
Rights and permissions
About this article
Cite this article
Janosevic, D., Mitrev, R., Andjelkovic, B. et al. Quantitative measures for assessment of the hydraulic excavator digging efficiency. J. Zhejiang Univ. Sci. A 13, 926–942 (2012). https://doi.org/10.1631/jzus.A1100318
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.A1100318