Abstract
Median noise barriers, like parallel noise barriers, can be employed to reduce the impact of traffic on roadside communities via the direct propagation path. The performance of different shapes of median barriers was compared using reactive and passive surfaces and a 2D boundary element method (BEM). In the case of reactive surfaces, quadratic residue diffusers (QRDs) and primitive root diffusers (PRDs) were used on the top and stem surfaces of median barriers. To introduce passive barriers, two different absorbent materials including fibrous material and a grass surface with flow resistivity of 20 000 and 2500 kg/(s·m2), respectively, were similarly applied. The effect of thin absorptive barriers was similar at lower frequencies and better at mid and high frequencies to that of their equivalent rigid barriers. More improvement was achieved by covering the top surface of thick barriers with grass rather than with fibrous material. The performance of QRD and PRD barriers where the diffuser was located on the top surface was more frequency dependent than that of barriers coated with fibrous material. A comparison of the average A-weighted insertion loss in the thick barriers showed that the greatest improvement (2.59 dB (A)) was achieved using a barrier of 30-cm thickness covered with grass.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
BS EN 1793-3: 1998. Road Traffic Noise Reducing Devices—Test Method for Determining the Acoustic Performance. Part 3: Normalized Traffic Noise Spectrum. British Standard.
Cheng, W.F., Ng, C.F., 2001. The acoustic performance of an inclined barrier for high-rise residents. Journal of Sound and Vibration, 242(2):295–308. [doi:10.1006/jsvi.2000.3352]
Cox, T.J., D’Antonio, P., 2004. Acoustic Absorbers and Diffusers: Theory, Design and Application. Spon Press, Taylor & Francis Publications.
Crombie, D.H., Hothersall, D.C., Chandler-Wilde, S.N., 1995. Multiple-edge noise barrier. Applied Acoustics, 44(4): 353–367. [doi:10.1016/0003-682X(94)00032-Q]
Delany, M.E., Bazely, E.N., 1970. Acoustical properties of fibrous absorbent material. Applied Acoustics, 3(2):105–116. [doi:10.1016/0003-682X(70)90031-9]
Donnell, E., Hughes, W., 2005. State Transportation Agency Median Design and Safety Practices: Results from a Survey. Transportation Research Board 84th Annual Meeting, Washington, DC.
Fujiwara, K., 1995. A study of the sound absorption of a quadratic-residue type diffuser. Acustica, 81:370–378.
Fujiwara, K., Hothersall, D.C., Kim, C., 1998. Noise barriers with reactive surfaces. Applied Acoustics, 53(4):225–272. [doi:10.1016/S0003-682X(97)00064-9]
Galland, M., Mazeaud, B., Sellen, N., 2005. Hybrid passive/active absorbers for flow ducts. Applied Acoustics, 66(6):691–708. [doi:10.1016/j.apacoust.2004.09.007]
Hothersall, D.C., Chandler-Wilde, S.N., Hajmirzae, M.N., 1991. Efficiency of single noise barriers. Journal of Sound and Vibration, 146(2):303–322. [doi:10.1016/0022-460X(91)90765-C]
Lamancusa, J.S., 2009. Noise Control, Outdoor Sound Propagation. Pennsylvania, USA. Available from http://www.me.psu.edu/lamancusa/me458/10_osp.pdf [Accessed on Sept. 6, 2009]
Londhe, N., Rao, M.D., Blough, J.R., 2009. Application of the ISO 13472-1 in situ technique for measuring the acoustic absorption coefficient of grass and artificial turf surfaces. Applied Acoustics, 70(1):129–141. [doi:10.1016/j.apacoust.2007.12.011]
Martin, S.J., Hothersall, D.C., 2002. Numerical modeling of median road traffic noise barriers. Journal of Sound and Vibration, 251(4):671–681. [doi:10.1006/jsvi.2001.3955]
May, D.N., Osman, M.M., 1980. Highway noise barriers: New shapes. Journal of Sound and Vibration, 71(1):73–101. [doi:10.1016/0022-460X(80)90410-1]
Mechel, F.P., 1995. The wide-angle diffuser—a wide-angle absorber? Acoustica., 81:379–401.
Monazzam, M.R., 2009. Optimization of profiled diffuser barrier using the new multi-impedance discontinuities model. International Journal of Environmental Research, 3(3):327–334.
Monazzam, M.R., Lam, Y.W., 2005. Performance of profile single noise barriers covered with quadratic residue diffusers. Applied Acoustics, 66(6):709–730. [doi:10.1016/j.apacoust.2004.08.008]
Monazzam, M.R., Lam, Y.W., 2008. Performance of T-shape barriers with top surface covered with absorptive quadratic residue diffusers. Applied Acoustics, 69(2):93–109. [doi:10.1016/j.apacoust.2006.10.006]
Monazzam, M.R., Nassiri, P., 2009. Contribution of quadratic residue diffusers to efficiency of tilted profile parallel highway noise barriers. Iranian Journal of Environmental Health Science & Engineering, 6(4):271–284.
Watts, G.R., 1996. Acoustics performance of parallel traffic noise barriers. Applied Acoustics, 47(2):95–119. [doi:10.1016/0003-682X(95)00031-4]
Watts, G.R., Godfrey, N.S., 1999. Effects on roadside noise levels of sound absorptive materials in noise barriers. Applied Acoustics, 58(4):385–402. [doi:10.1016/S0003-682X(99)00007-9]
Watts, G.R., Crombie, D.H., Hothersall, D.C., 1994. Acoustic performance of new design of traffic noise barriers: Full scale tests. Journal of Sound and Vibration, 177(3):289–305. [doi:10.1006/jsvi.1994.1435]
Wu, T., Cox, T.J., Lam, Y.W., 2000. From a profiled diffuser to an optimized absorber. The Journal of the Acoustical Society of America, 108(2):643–650. [doi:10.1121/1.429596]
Wu, T., Cox, T.J., Lam, Y.W., 2001. A profiled structure with improved low frequency absorption. The Journal of the Acoustical Society of America, 110(6):3064–3070. [doi:10.1121/1.1412443]
Author information
Authors and Affiliations
Corresponding author
Additional information
Project (No. 8707) supported by the Tehran University of Medical Sciences, Iran
Rights and permissions
About this article
Cite this article
Monazzam, M.R., Fard, S.M.B. Performance of passive and reactive profiled median barriers in traffic noise reduction. J. Zhejiang Univ. Sci. A 12, 78–86 (2011). https://doi.org/10.1631/jzus.A1000065
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.A1000065