Abstract
Corrosion is one of the main causes of deterioration in steel structures. Loss of thickness in flanges and web of corroded steel beams leads to reduction in section properties which can reduce the lateral torsional buckling capacity of the member. In this paper, thickness loss data were compiled from four samples of corrosion damaged I-beams removed from a petro-chemical plant. Visual examination of the four corroded beams showed that they were corroded uniformly. To improve the accuracy of the results, a large number of measurements for surface roughness were taken for each beam, totally 770 values to obtain the average thickness of flanges and web of each beam. The data was used to develop a corrosion decay model in order to calculate the percentage remaining lateral torsional buckling capacity of long and short span beams which are laterally unrestrained. To estimate the percentage of remaining lateral torsional buckling capacity in the corroded damaged I-beams, the readily available minimum curves for different types of universal beams in conjunction with information on the thickness loss were used. The results can be used by practicing engineers for better estimation on the service life of deteriorated steel structures.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Bruneau, M., Zahrai, S.M., 1997. Effect of severe corrosion on the ductility of steel members. Journal of Structural Engineering, ASCE, 123(11):1478–1486. [doi:10.1061/(ASCE)0733-9445(1997)123:11(1478)]
BS 5950, 1985. Structural Use of Steel Work in Building, Code of Practice Design in Simple and Continuous Construction, Hot Rolled Sections. British Standard Institution.
Czarnecki, A.A., Nowak, A.S., 2008. Time-variant reliability profiles for steel girder bridges. Structural Safety, 30(1):49–64. [doi:10.1016/j.strusafe.2006.05.002]
Fontana, M.G., 1987. Corrosion Engineering (3rd Ed.). McGraw-Hill Book Company, New York.
Gallon, M.J., 1993. Managing Structural Corrosion in Chemical Plant. ICI Engineering, New Steel Construction, UK.
Gallon, M.J., Sarvesvaran, V., Smith, J.W., 1995. Structural Assessment of Corrosion Damaged Steel Work. Proceeding of the Extensively the Life Span of Structures, IABSE Symposium, San Francisco, USA.
Kayser, J.R., 1988. The Effects of Corrosion on the Reliability of Steel Girder Bridges. PhD Thesis, Department of Civil Engineering, University of Michigan, USA.
Kayser, J.R., Nowak, A.S., 1989. Capacity loss due to corrosion in steel-girder bridges. Journal of Structural Engineering, ASCE, 115(6):1525–1537. [doi:10.1061/(ASCE)0733-9445(1989)115:6(1525)]
Kulicki, J.M., Prucs, Z., Sorgenfrei, D.F., Mertz, D.R., 1990. Guidelines for Evaluating Corrosion Effects in Existing Steel Bridges. National Cooperative Highway Research Program, Report 333, Transportation Research Board, National Research Council, Washington, D.C.
Martin, L.H., Purkiss, J.A., 1992. Structural Design of Steelwork to BS 5950 (1st Ed.). Edward Arnold, London.
Nakai, T., Matsushita, H., Yamamoto, N., 2004. Effect of pitting corrosion on local strength of hold frames of the bulk carriers (2nd report)-lateral distortional buckling and local face buckling. Marine Structures, 17(8):612–641. [doi:10.1016/j.marstruc.2005.03.001]
Nakai, T., Matsushita, H., Yamamoto, N., 2005. Pitting Corrosion and Its Influence on Local Strength of Hull Structural Members. 24th International Conference on Offshore Mechanics and Arctic Engineering. Khalkidhiki, Greece, 2:25–35. [doi:10.1115/OMAE2005-67025]
Nakai, T., Matsushita, H., Yamamoto, N., 2006a. Effect of pitting corrosion on strength of web plates subjected to patch loading. Thin-Walled Structures, 44(1):10–19. [doi:10.1016/j.tws.2005.09.004]
Nakai, T., Matsushita, H., Yamamoto, N., 2006b. Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending. Journal of Marine Science and Technology, 11(1):52–64. [doi:10. 1007/s00773-005-0203-4]
Nethercot, D.A., 1974. Residual stresses and their influence upon the lateral buckling of rolled steel beams. Structural Engineer, Institution of Structural Engineers, 52(3): 89–96.
Nethercot, D.A., 2001. Limit States Design of Structural Steelwork (3rd Ed.). Spon Press, London, UK.
Ok, D., Pu, Y.C., Incecik, A., 2007. Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression. Marine Structures, 20(1–2): 100–114. [doi:10.1016/j.marstruc.2007.02.003]
Paik, J.K., 2003. Time-dependent Risk Assessment of Ageing Ships Accounting for General/Pit Corrosion, Fatigue Cracking and Local Dent Damage. SNAME Annual Meeting, World Maritime Technology Conference, San Francisco, USA.
Paik, J.K., Lee, J.M., Ko, M.J., 2003. Ultimate compressive strength of plate elements with pit corrosion wastage. Journal of Engineering for the Maritime Environment, 217(4):185–200.
Paik, J.K., Lee, J.M., Ko, M.J., 2004. Ultimate shear strength of plate elements with pit corrosion wastage. Thin-Walled Structures, 42(8):1161–1176. [doi:10.1016/j.tws.2004.03.024]
Rahgozar, R., 1998. Fatigue Endurance of Steel Structures Subjected to Corrosion. PhD Thesis, Department of Civil Engineering, University of Bristol, UK.
Rahgozar, R., 2009. Remaining capacity assessment of corrosion damaged beams using minimum curves. Journal of Constructional Steel Research, 65(2):299–307. [doi:10.1016/j.jcsr.2008.02.004]
Sarveswaran, V., Smith, J.W., Blockley, D.I., 1998. Reliability of corrosion damaged steel structures using interval probability theory. Structural Safety, 20(3):237–255. [doi:10.1016/S0167-4730(98)00009-5]
Smith, J.W., 1993. Mechanical Properties of Samples of Structural Steel Affected by Corrosion. Report No. UBCE/JWS/93/01, Department of Civil Engineering, University of Bristol, UK.
Timoshenko, S.P., Gere, J.M., 1961. Theory of Elastic Stability. McGraw-Hill Book Company, New York.
Trahair, N.S., Bradford, M.A., Nethercot, D.A., 2001. The Behavior and Design of Steel Structures to BS 5950 (3rd Ed.). Spon Press, Taylor & Francis Group, London, British.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sharifi, Y., Rahgozar, R. Evaluation of the remaining lateral torsional buckling capacity in corroded steel members. J. Zhejiang Univ. Sci. A 11, 887–897 (2010). https://doi.org/10.1631/jzus.A0900673
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.A0900673