Abstract
This paper presents different views on electrode modelling, which include electrode electrochemistry models for modelling the effects of electrode-electrolyte interface, electric field electrode models for modelling electrode geometry, and electrode models for modelling the effects of electrode common mode voltage and double layer capacitance. Taking the full electrode models into consideration in electrical impedance tomography (EIT) will greatly help the optimised approach to a good solution and further understanding of the measurement principle.
Similar content being viewed by others
References
Baber, D.C., Brown, B.H., 1984. Applied potential tomography.J. Phys. E: Sci. Instrum.,17:723–733.
Bockris, J.O.M., Conway, B.E., 1969. Modern Aspects of Electrochemistry. Plenum Press, New York.
Bockris, J.O.M., Reddy, A.K.N., 1970. Modern Electrochemistry. Macdonald, London.
Bockris, J.O.M., Drazic, D.M., 1972. Electro-chemical Science. Taylor and Frabcis Ltd.
Brown, B.H., Seagar, A.D., 1985. Applied Potential Tomography: Data Collection Problems. Proc. IEE Int. Conf. on Electric and Magnetic Field in Medic. and Biolo., p. 79–82.
Cheng, K., Isaacson, D., Newell, J.C., Gisser, D.C., 1989. Electrode models for electric current computed tomography.IEEE Trans. Biom. Engng.,36(9):918–924.
Cobbold, R.S.C., 1974. Transducers for Biomedical Measurements: Principles and Applications. John Wiley & Sons.
Conway, B.E., 1952. Electrochemistrical Data. Elsevier Publishing Company.
Crow, D.R., 1974. Principles and Applications of Electrochemistry. Chapman and Hall, London.
Geddes, L.A., Costa, C.P.D., Wise, G., 1971. The impedance of stainless-steel electrodes.Med. & Biol. Engng.,9:511–521.
Hua, P., Woo, E.J., Webster, J.G., Tompkins, W.J., 1993. Using compound electrodes in electrical impedance tomography.IEEE Trans. Biomed. Eng.,40(1):29–34.
Ider, Y.Z., Gencer, N.G., Altlar, E., Tosun, H., 1990. Electrical impedance tomography of translationally uniform cylidrical objects with general cross-sectional boundary.IEEE Trans. on Med. Imag.,9(1):49–59.
Kraus, J.D., 1953. Electromagnetics. Book Company, Inc.
Ma, Y., Wang, M., 2004. Performance of a High-speed Impedance Camera for Flow Informatics. Proceedings of EDSA04, ASME, Manchester.
Murphy, D., Rolfe, P., 1988. Aspects of instrumentation design for impedance imaging.Clin. Phys. Physiol. Meas.,9(A):5–14.
Murai, T., Kagawa, Y., 1985. Electrical impedance computed tomography based on a finite element model.IEEE Trans. Biomed Eng.,BME-32(3):177–184.
Myers, D.F., Saville, D.A., 1989. Dielectric spectroscopy of colloidal suspensions.J. Colloid and Interface Science,131(2):448–460.
Pidcock, M.K., 1994. Analysing the Importance of Electrode modelling in Electrical Impedance Tomography.In: Beck, M.S., Campogrande, E., Morris, M., Williams, R.A., Waterfall, R.C. (Eds.), Process Tomography—A Strategy for Industrial Exploitation. UMIST, Manchester, UK, p. 285–290.
Pollak, V., 1974a. An equivalent diagram for the interface impedance of metal needle electrodes.Med. and Biolo. Engng.,July:454–459.
Pollak, V., 1974b. Computation of the impedance characteristic of metal electrodes for biological investigations.Med. and Biolo. Engng.,July:460–464.
Schwan, H.P., Ferris, C.D., 1968. Four-electrode null techniques for impedance measurement with high resolution.The Review of Scientific Instruments,39(4):481–485.
Vauhkonen, P.J., Vauhkonen, M., Savolainen, T., Kaipio, P., 1999. Three-dimensional electrical impedance tomography based on the complete electrode model.IEEE Trans. Biomed. Eng.,46(9):1150–1160.
Wang, M., 1994. Electrical Impedance Tomographyn Conducting Walled Process Vessels. Ph.D Thesis, UMIST.
Wang, M., Ma, Y.X. 2005. Over Zero Switching Scheme for Fast Data Collection Operation in Electrical Impedance Tomography. Proceedings of 4th World Congress on Industrial Process Tomography, Ajzu, Japan.
Wang, M., Dickin, F.J., Beck, M.S., 1993. Improved Electrical Impedance Tomography Data Collection System and Measurement Protocols.In: Beck, M.S., Campogrande, E., Morris, M., Williams, R.A., Waterfall, R.C. (Eds.), Tomography Technique and Process Design and Operation. Computational Mechanics Publications, Manchester, p. 75–88.
Wang, M., Dickin, F.J., Williams, R.A., 1994. Electrical resistance tomography of metal walled vessels and pipelines.Electronics Letters,30(10):771–773.
Wang, M., Dickin, F.J., Williams, R.A., 1995a. Modelling and analysis of electrically conducting vessels and pipelines in electrical resistance process tomography.IEE Proc. Sci. Meas. Technol.,142(4):313–322.
Wang, M., Dickin, F.J., Williams, R.A., 1995b. The grouped node technique as a means of handling large electrode surfaces in electrical impedance tomography.Physiol. Meas.,16:219–226.
Wang, M., Mann, R., Dickin, F.J., 1999. Electrical resistance tomographic sensing systems for industrial applications.Chem. Eng. Comm.,175:49–70.
Wang, M., Ma, Y., Holliday, N., Dai, Y., Williams, R.A., Lucas, G., 2005. A high performance EIT system.IEEE Sensors Journal,5(2):289–299.
Weinman, J., Mahler, J., 1964. An analysis of electrical properties of metal electrodes.Med. Electron. Biod. Engng.,2:299–310.
Yorkey, T.J., Webster, J.G., Tompkins, W.J., 1985. Errors Caused by Contact Impedance in Impedance Imaging. Proc. IEEE/Seventh Ann. Conf. Eng. Med. Biol. Soc., p.632–637.
Yorkey, T.J., Webster, J.G., Tompkins, W.J., 1987. Comparing reconstruction algorithm for electrical impedance tomography.IEEE Trans. Biomed. Eng., Nov.,BME-34(11):843–851.
Zhou, P., 1993. Numerical Analysis of Electriomagnetic Fields. Springer-Verlag, Berlin, Heidelberg.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, M. Electrode models in electrical impedance tomography. J. Zhejiang Univ. Sci. A 6, 1386–1393 (2005). https://doi.org/10.1631/jzus.2005.A1386
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.2005.A1386