Abstract
An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presented in this paper with transverse and longitudinal tube-pitch and tube geometries taken into account. The experiment’s results can provide technical guidelines for application to horizontal air preheater with arranged in-line spirally corrugated tube bundles, especially to the air preheater for CFBCBs (Circulating Fluidized Bed Combustion Boilers).
Similar content being viewed by others
References
Al-Arabi, M., 1982. Turbulent heat transfer in the entrance region of a tube.Heat Transfer Eng., (3):76–83.
Chen, X.J., Chen, T.K. (Eds.), 1981. Boiler Principle, Upper Volume, 2nd Version. Mechanical Industry Publisher, Beijing, p. 259 (in Chinese).
Dittus, P.W., Boelter, L.M.K., 1930. Heat Transfer in Automobile Radiators of the tubular type.Univ. Calif. Publ. Eng., (273):443–461.
Kays, W.M., Crawford, M.E., 1980. Convective Heat and Mass Transfer, 2nd Edition. McGraw-Hill, New York.
Lu, G.D., 2004. The Heat Transfer Characteristics of Air Cross-flow for In-line Arrangement of Spirally Corrugated Tube and Smooth Tube Bundles. Ph.D. Thesis, Southeast University (in Chinese).
Wang, Z.N., 1995. An Experimental and Theoretical Study on the Compound Enhanced Heat Transfer of Single-phase Flow in Tubes. Ph.D Thesis, Southeast University (in Chinese).
Zukauskas, A., 1986. Convection Heat Transfer in Heat Exchanger, Scientific Publisher, 1st Version, p.295.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guo-dong, L., Qiang-tai, Z., Mao-cheng, T. et al. Heat transfer characteristics of air cross-flow for in-line arrangement of spirally corrugated tube and smooth tube bundles. J Zheijang Univ Sci A 6, 670–675 (2005). https://doi.org/10.1631/jzus.2005.A0670
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.2005.A0670