Abstract
The paper presents the results of an investigation that focused on the influence of lighting conditions and camera management (the attaching mode, angle of scanning, and distance of camera lens) on the chromaticity (the range of shades) of an image of the aggregate. No significant differences in the range of shades were revealed in the aggregate (andesite and limestone) and bitumen that were placed on two backgrounds (black and white paper). The possibility of distinguishing the aggregate and bitumen was assessed using their range of shades in a brightness histogram. The overlapping of the ranges of the aggregate and background shades was identified. Similarly, it was identified that the ranges of the aggregate and bitumen overlapped. The percentage of errors was different. The errors that occurred when the white background and dry surface of the aggregate were assessed were minimal and acceptable. A verification of the proposed methodology that focused on distinguishing the aggregate and bitumen via the colour histogram proved that the best method for determination of the degree of bitumen coverage was by using the average of the values determined for each aggregate particle. This method was more time consuming, but it eliminated the errors due to the shadows on the background caused by the aggregate particles arranged with gaps. It also eliminated the overestimation of the degree of bitumen coverage owing to the dark areas among the aggregate particles stored without gaps.
Similar content being viewed by others
References
Bonaquist R (2014) Impact of mix design on asphalt pavement durability. Transportation Research Circular No. E-C186, 1–17
Kandahl PS, Parker F Jr (1998) NCHRP report 405: aggregate tests related to asphalt concrete performance in pavements. Transportation Research Board of the National Academies, Washington
Cui S, Blackman BRK, Kinloch AJ, Taylor AC (2014) Durability of asphalt mixtures: effect of aggregate type and adhesion promoters. Int J Adhes Adhes 54(2014):100–111
Christensen D W, Bonaquist R F (2014) Design guidance for fatigue and rut resistance mixtures. Asphalt Research Consortium Report U
Airey GD, Collop AC, Zoorob SE, Elliott RC (2008) The influence of aggregate, filler and bitumen on asphalt mixture water damage. Constr Build Mater 22(2008):2015–2024
EN, “CEN (Comité Européen de Normalisation) (2012) EN 12697-11-bituminous mixtures-test methods for hot mix asphalt—part 11: determination of the affinity between aggregate and bitumen,” EN 12697-11
Grönnige J (2008) Computer-aided evaluation of rolling bottle tests. Straße und Autobahn 2008(7):415–419
Morgenstern A, Schulze C, Marschke L (2010) Improvement the precision of the test to determine the adhesion between coarse aggregates and bitumen. Straße und Autobahn 12:879–884
Mesusi F, Caruso A, Roncella R, Giuliani F (2010) Moisture susceptibility and stripping resistance of asphalt mixtures modified with different synthetic waxes. Transp Res Rec 2180(1):110–120
Ibraheem NA, Hasan MM, Khan RZ, Mishra PK (2012) Understanding color models: a review. J Sci Technol 2(3):265–275
Lamperti R, Lantieri C, Sangiorgi C, Bitelli G, Simone A (2016) Semiautomatic evaluation of the degree of bitumen coverage on bitumen-coated aggregates. In: Proceeding of 8th RILEM international symposium on testing and characterization of sustainable and innovative bituminous materials, 15–24
Lantieri C, Lamperti R, Simone A, Vignali V, Sangiorgi C, Dondi G, Magnani M (2017) Use of image analysis for the evaluation of rolling bottle tests results. Int J Pavement Res Technol 10:45–53
Mulsow C (2012) Determination of the degree of gravel aggregate-bitumen coverage by multi-directional reflectance measurements. In: Proceeding of XXII ISPRS Congress, Melbourne
Källén H, Heyden A, Lindh P (2013) Measuring bitumen coverage of stones using a turntable and specular reflections. In: Proceeding of 8th international conference on computer vision theory and applications (VISAPP 2013), 333–337
Källén H, Heyden A, Aström K, Lindh P (2016) Measuring and evaluating bitumen coverage of stones using two different digital image analysis methods. Measurement 84:56–67
Funding
This study was funded by the Scientific Grant Agency of the Ministry of Education, Science, Research, and Sport of the Slovak Republic and Slovak Academy of Science under the grant VEGA 1/0300/17 Research of performance-related rheological properties of bituminous binders.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Komačka, J., Budjačová, E. & Remišová, E. Colour-histogram-based assessment procedure of the rolling bottle test considering the drawbacks in the digital image analysis of bitumen–aggregate systems. Mater Struct 52, 59 (2019). https://doi.org/10.1617/s11527-019-1359-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1617/s11527-019-1359-4