Skip to main content
Log in

The effect of the capillary forces on the desorption of hydrogels in contact with a porous cementitious material

  • Original Article
  • Published:
Materials and Structures Aims and scope Submit manuscript

Abstract

This paper examines the desorption of hydrogels in contact with porous cementitious materials to aid in understanding the mechanisms of water release from superabsorbent polymers (SAP) into cementitious materials. The dependence of hydrogel desorption on the microstructure of cementitious materials and relative humidity was studied. It was shown that the capillary adhesion developed at the interface between the hydrogel and cementitious materials increased the desorption of the hydrogels. The size of hydrogels was shown to influence desorption, beyond the known size dependence of bulk diffusion, through debonding from the cementitious matrix, thereby decreasing the effect of the Laplace pressure on desorption. Microscopic examination highlighted a stark contrast in the desorption morphology of hydrogels with different chemical compositions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Mechtcherine V et al (2014) Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-Robin test. Mater Struct 47:541–562

  2. Beushausen H, Gillmer M, Alexander M (2014) The influence of superabsorbent polymers on strength and durability properties of blended cement mortars. Cem Concr Compos 52:73–80

    Article  Google Scholar 

  3. Hasholt MT, Jensen OM (2015) Chloride migration in concrete with superabsorbent polymers. Cem Concr Compos 55:290–297

    Article  Google Scholar 

  4. Mechtcherine V, Secrieru E, Schröfl C (2015) Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars—development of yield stress and plastic viscosity over time. Cem Concr Res 67:52–65

    Article  Google Scholar 

  5. Snoeck D, Schaubroeck D, Dubruel P, De Belie N (2014) Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50. Constr Build Mater 72:148–157

    Article  Google Scholar 

  6. Jensen OM, Hansen PF (2001) Water-entrained cement-based materials I. Principles and theoretical background. Cem Concr Res 31:647–654

    Article  Google Scholar 

  7. Jensen OM, Hansen PF (2002) Water-entrained cement-based materials II. Experimental observations. Cem Concr Res 32:973–978

    Article  Google Scholar 

  8. Lura P, Jensen OM, van Breugel K (2003) Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms. Cem Concr Res 33:223–232

    Article  Google Scholar 

  9. Bentz DP, Jensen OM (2004) Mitigation strategies for autogenous shrinkage cracking. Cem Concr Compos 26:677–685

    Article  Google Scholar 

  10. Soliman AM, Nehdi ML (2011) Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age. Mater Struct 44:879–899

    Article  Google Scholar 

  11. Kong X, Zhang Z, Lu Z (2015) Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete. Mater Struct 48:2741–2758

    Article  Google Scholar 

  12. Wang JY, Snoeck D, Van Vlierberghe S, Verstraete W, De Belie N (2014) Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete. Constr Build Mater 68:110–119

    Article  Google Scholar 

  13. Trtik P, Muench B, Weiss WJ, Herth G, Kaestner A, Lehmann E, Lura P (2010) Neutron tomography measurements of water release from superabsorbent polymers in cement paste. In: Int. Conf. Mater. Sci. 64th RILEM Annu. Week, pp 175–185

  14. Lee H, Wong HS, Buenfeld NR (2010) Potential of superabsorbent polymer for self-sealing cracks in concrete. Adv Appl Ceram 109:296–302

    Google Scholar 

  15. Lee HXD, Wong HS, Buenfeld NR (2016) Self-sealing of cracks in concrete using superabsorbent polymers. Cem Concr Res 79:194–208

    Article  Google Scholar 

  16. Justs J, Wyrzykowski M, Bajare D, Lura P (2015) Internal curing by superabsorbent polymers in ultra-high performance concrete. Cem Concr Res 76:82–90

    Article  Google Scholar 

  17. Mechtcherine V, Reinhardt HW (eds) (2011) Application of superabsorbent polymers (SAP) in concrete construction, State-of-the-art report of the RILEM TC 225-SAP. Springer

  18. Wyrzykowski M, Lura P, Pesavento F, Gawin D (2012) Modeling of water migration during internal curing with superabsorbent polymers. J Mater Civ Eng 24:1006–1016

    Article  Google Scholar 

  19. Gu Z, Alexandridis P (2005) Drying of films formed by ordered poly (ethylene oxide)—poly (propylene oxide) block copolymer gels. Langmuir 21:1806–1817

    Article  Google Scholar 

  20. Lyn ME, Ying D (2010) Drying model for calcium alginate beads. Ind Eng Chem Res 49:1986–1990

    Article  Google Scholar 

  21. Wang F, Yang J, Cheng H, Wu J, Liang X (2015) Study on mechanism of desorption behavior of saturated superabsorbent polymers in concrete. ACI Mater J 112:463–469

    Google Scholar 

  22. Marcombe R, Cai S, Hong W, Zhao X, Lapusta Y, Suo Z (2010) A theory of constrained swelling of a pH-sensitive hydrogel. Soft Matter 6:784

    Article  Google Scholar 

  23. Farzanian K, Pimenta Teixeira K, Perdiago Rocha I, De Sa Carneiro L, Ghahremaninezhad A (2016) The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers. Constr Build Mater 109:156–165

    Article  Google Scholar 

  24. Pritchard RH, Terentjev EM (2013) Swelling and de-swelling of gels under external elastic deformation. Polymer (Guildf). 54:6954–6960

    Article  Google Scholar 

  25. Liu Q, Robisson A, Lou Y, Suo Z (2013) Kinetics of swelling under constraint. J Appl Phys 114:064901

    Article  Google Scholar 

  26. Liu Q, Suo Z (2016) Osmocapillary phase separation. Extrem Mech Lett 7:27–33

    Article  Google Scholar 

  27. Hall C (1994) Barrier performance of concrete: a review of fluid transport theory. Mater Struct 27:291–306

    Article  Google Scholar 

  28. Martys NS, Ferraris CE (1997) Capillary transport in mortars and concrete. Cem Concr Res 27:747–760

    Article  Google Scholar 

  29. Castro J, Bentz D, Weiss J (2011) Effect of sample conditioning on the water absorption of concrete. Cem Concr Compos 33:805–813

    Article  Google Scholar 

  30. Wang L, Ueda T (2011) Mesoscale modeling of water penetration into concrete by capillary absorption. Ocean Eng 38:519–528

    Article  Google Scholar 

  31. Tasdemir C (2003) Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete. Cem Concr Res 33:1637–1642

    Article  Google Scholar 

  32. Yang Z, Weiss WJ, Olek J (2006) Water transport in concrete damaged by tensile loading and freeze-thaw cycling. J Mater Civ Eng 18:424–434

    Article  Google Scholar 

  33. Cnudde V, Dierick M, Vlassenbroeck J, Masschaele B, Lehmann E, Jacobs P, Van Hoorebeke L (2008) High-speed neutron radiography for monitoring the water absorption by capillarity in porous materials. Nucl Instrum Methods Phys Res Sect B 266:155–163

    Article  Google Scholar 

  34. Şahmaran M, Li VC (2009) Influence of microcracking on water absorption and sorptivity of ECC. Mater Struct 42:593–603

    Article  Google Scholar 

  35. Zhang P, Wittmann FH, Zhao TJ, Lehmann EH, Tian L, Vontobel P (2010) Observation and quantification of water penetration into strain hardening cement-based composites (SHCC) with multiple cracks by means of neutron radiography. Nucl Instrum Methods Phys Res Sect A 620:414–420

    Article  Google Scholar 

  36. Lockington D, Parlange J (2003) Anomalous water absorption in porous materials. J Phys D Appl Phys 36:760–767

    Article  Google Scholar 

  37. Trtik P, Münch B, Weiss WJ, Kaestner A, Jerjen I, Josic L, Lehmann E, Lura P (2011) Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography. Nucl Instrum Methods Phys Res Sect A 651:244–249

    Article  Google Scholar 

  38. Schroefl C, Mechtcherine V, Vontobel P, Hovind J, Lehmann E (2015) Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration. Cem Concr Res 75:1–13

    Article  Google Scholar 

  39. Toropovs N, Lo Monte F, Wyrzykowski M, Weber B, Sahmenko G, Vontobel P, Felicetti R, Lura P (2015) Real-time measurements of temperature, pressure and moisture profiles in high-performance concrete exposed to high temperatures during neutron radiography imaging. Cem Concr Res 68:166–173

    Article  Google Scholar 

  40. Horkay F, Tasaki I, Basser PJ (2000) Osmotic swelling of polyacrylate hydrogels in physiological salt solutions. Biomacromolecules 1:84–90

    Article  Google Scholar 

  41. Zhu Q, Barney CW, Erk KA (2015) Effect of ionic crosslinking on the swelling and mechanical response of model superabsorbent polymer hydrogels for internally cured concrete. Mater Struct 48:2261–2276

    Article  Google Scholar 

  42. Krafcik MJ, Erk KA (2016) Characterization of superabsorbent poly (sodium-acrylate acrylamide) hydrogels and influence of chemical structure on internally cured mortar. Mater Struct 49:4765–4778

    Article  Google Scholar 

  43. Mignon A, Snoeck D, Schaubroeck D, Luickx N, Dubruel P, Van Vlierberghe S, De Belie N (2015) pH-responsive superabsorbent polymers: a pathway to self-healing of mortar. React Funct Polym 93:68–76

    Article  Google Scholar 

  44. Esteves LP (2011) Superabsorbent polymers: on their interaction with water and pore fluid. Cem Concr Compos 33:717–724

    Article  Google Scholar 

  45. Schröfl C, Mechtcherine V, Gorges M (2012) Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage. Cem Concr Res 42:865–873

    Article  Google Scholar 

  46. Siriwatwechakul W, Siramanont J, Vichit-Vadakan W (2012) Behavior of superabsorbent polymers in calcium- and sodium-rich solutions. J Mater Civ Eng 24:976–980

    Article  Google Scholar 

  47. Spragg RP, Castro J, Li W, Pour-Ghaz M, Huang PT, Weiss J (2011) Wetting and drying of concrete using aqueous solutions containing deicing salts. Cem Concr Compos 33:535–542

    Article  Google Scholar 

  48. Yoon J, Cai S, Suo Z, Hayward RC (2010) Poroelastic swelling kinetics of thin hydrogel layers: comparison of theory and experiment. Soft Matter 6:6004

    Article  Google Scholar 

  49. Sokoloff JB (2016) Effects of capillary forces on a hydrogel sphere pressed against a surface. Langmuir 32:135–139

    Article  Google Scholar 

  50. Villani C, Spragg R, Pour-Ghaz M, Jason Weiss W (2014) The influence of pore solutions properties on drying in cementitious materials. J Am Ceram Soc 97:386–393

    Article  Google Scholar 

Download references

Acknowledgements

This work was performed in the Advanced Materials Research Laboratory at University of Miami.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. Ghahremaninezhad.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Farzanian, K., Ghahremaninezhad, A. The effect of the capillary forces on the desorption of hydrogels in contact with a porous cementitious material. Mater Struct 50, 216 (2017). https://doi.org/10.1617/s11527-017-1068-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1617/s11527-017-1068-9

Keywords

Navigation