Abstract
A novel approach was devised to synthesize a sustainable hydraulic cement based on alkali aluminosilicate chemistry via mechanochemical activation. This approach builds upon past work on activation of aluminosilicate precursors using alkaline solutions to produce inorganic binders for concrete construction. Recent efforts to develop one-part hydraulic cements based on the chemistry of alkali-activated aluminosilicates have resorted to high-temperature processing techniques which compromise the sustainability advantages of the system, and also require curing at elevated temperatures. The mechanochemical process developed here takes place at room temperature, and yields a hydraulic cement that does not require addition of caustic solutions to render binding effects via room-temperature curing. Processing of this hydraulic cement takes place at room temperature; this advantage together with extensive use of recycled raw materials yield significant sustainability benefits. The (dry) raw materials used for mechanochemical processing of hydraulic cement included coal fly ash, quick lime, sodium hydroxide and Magnesium oxide. The mechanochemically processed hydraulic cement was evaluated through performance of tests concerned with their pH, heat of hydration, chemical composition, crystallinity and microstructure. The hydraulic cement was used to produce concrete materials cured at room temperature. The resulting concrete materials were found to provide desired levels of workability in fresh state and compressive strength after curing, which were comparable to those of Portland cement concrete. Investigations were also conducted on the hydration kinetics of the hydraulic cement and the microstructure of its hydrates in order to gain insight into its hydration process and the nature of hydration products.
Similar content being viewed by others
References
Davidovits J (1989) Geopolymers and geopolymeric materials. J Therm Anal 35(2):429–441
Provis JL, Bernal SA (2014) Geopolymers and related alkali-activated materials. Annu Rev Mater Res 44:299–327
Davidovits, J., Sawyer, J.L (1985)Early high-strength mineral polymer. Google Patents
Davidovits J (1991) Geopolymers. J Therm Anal 37(8):1633–1656
Duxson P, Provis JL (2008) Designing precursors for geopolymer cements. J Am Ceram Soc 91(12):3864–3869
Nematollahi B, Sanjayan J, Shaikh FUA (2015) Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate. Ceram Int 41(4):5696–5704
Chindaprasirt P et al (2012) Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems. J Mater Sci 47(12):4876–4883
Feng D, Provis JL, Deventer JS (2012) Thermal activation of albite for the synthesis of one-part mix geopolymers. J Am Ceram Soc 95(2):565–572
Koloušek D et al (2007) Preparation, structure and hydrothermal stability of alternative (sodium silicate-free) geopolymers. J Mater Sci 42(22):9267–9275
Peng MX et al (2015) Synthesis, characterization and mechanisms of one-part geopolymeric cement by calcining low-quality kaolin with alkali. Mater Struct 48(3):699–708
Ye N et al (2016) Synthesis and strength optimization of one-part geopolymer based on red mud. Constr Build Mater 111:317–325
Sturm P et al (2016) Synthesizing one-part geopolymers from rice husk ash. Constr Build Mater 124:961–966
Hajimohammadi A, van Deventer JS (2016) Characterisation of one-part geopolymer binders made from fly ash. Waste Biomass Valoriz. doi:10.1007/s12649-016-9582-5
Temuujin J, Williams R, Van Riessen A (2009) Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature. J Mater Process Technol 209(12):5276–5280
Djobo JNY et al (2016) Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties. RSC Adv 6(45):39106–39117
Guo X et al (2010) A review of mechanochemistry applications in waste management. Waste Manag 30(1):4–10
Baláž P et al (2006) Mechanochemistry in the preparation of advanced materials. Acta Montanistica Slovaca. 11(2):122–129
Boldyrev V (2004) Mechanochemical modification and synthesis of drugs. J Mater Sci 39(16–17):5117–5120
Hadi P et al (2016) Sustainable development of a surface-functionalized mesoporous aluminosilicate with ultra-high ion exchange efficiency. Inorgan Chem Front 3(4):502–513
Van Jaarsveld J, Van Deventer J, Lukey G (2003) The characterisation of source materials in fly ash-based geopolymers. Mater Lett 57(7):1272–1280
Deniz V (2004) The effect of mill speed on kinetic breakage parameters of clinker and limestone. Cem Concr Res 34(8):1365–1371
Yao X et al (2009) Geopolymerization process of alkali–metakaolinite characterized by isothermal calorimetry. Thermochim Acta 493(1):49–54
Rahier H et al (2007) Reaction mechanism, kinetics and high temperature transformations of geopolymers. J Mater Sci 42(9):2982–2996
Jackson MD et al (2013) Material and elastic properties of Al-tobermorite in ancient Roman seawater concrete. J Am Ceram Soc 96(8):2598–2606
Acknowledgements
The authors wish to acknowledge the support of U.S. Department of Energy (U.S. DOE SBIR Award No. DE-SC0011960) for the work reported herein.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Matalkah, F., Xu, L., Wu, W. et al. Mechanochemical synthesis of one-part alkali aluminosilicate hydraulic cement. Mater Struct 50, 97 (2017). https://doi.org/10.1617/s11527-016-0968-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1617/s11527-016-0968-4