Abstract
This paper presents the results of an experimental investigation carried out to evaluate the influences of curing methods and mineral admixtures on the strength and chloride permeability of concrete. Rapid chloride ion penetration tests (ASTM C 1202) were used to measure the chloride permeability of concrete. Test results indicated that steam curing decreased the 28 days compressive strength of plain concrete by 11 %. Incorporating slag, fly ash, and silica fume can significantly mitigate this harmful consequence. After autoclave curing however, all concrete’s strength exceeds 80 MPa. Steam and autoclave curing increase the electrical charge passed through plain cement concrete by 110 and 224 %, respectively, when compared with normal curing. For steam curing, incorporating silica fume is the most efficient means to reduce the chloride permeability of concrete. For autoclave curing however, incorporating 30 % fly ash is the most efficient means to reduce chloride permeability.
Similar content being viewed by others
References
Alonso C, Andrade C, Castellote M, Castro P (2000) Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar. Cement Concr Res 30(7):1047–1055
Saraswathy V, Song HW (2007) Improving the durability of concrete by using inhibitors. Build Environ 42(1):464–472
Elsener B (2005) Corrosion rate of steel in concrete—measurements beyond the Tafel law. Corros Sci 47:3019–3033
Vedalakshmi R, Rajagopal K, Palaniswamy N (2008) Longterm corrosion performance of rebar embedded in blended cement concrete under macro cell corrosion condition. Constr Build Mater 22(3):186–199
Alhozaimy A, Sorushian P, Mirza F (1996) Effects of curing conditions and age on chloride permeability of fly ash mortar. ACI Mater J 93(1):87–95
Yildirim H, Ilica T, Sengul O (2011) Effect of cement type on the resistance of concrete against chloride penetration. Constr Build Mater 25(3):1282–1288
Monosi S, Moriconi G (1989) Effect of water/cement ratio and curing time on chloride penetration into concrete. Mater Eng 1(2):483–489
Boğa AR, Topçu IB (2012) Influence of fly ash on corrosion resistance and chloride ion permeability of concrete. Constr Build Mater 31(6):258–264
Ozyıldırım C, Halstead WJ (1994) Improved concrete quality with combinations of fly ash and silica fume. ACI Mater J 91(6):587–594
Ahmed MS, Kayali O, Anderson W (2008) Chloride penetration in binary and ternary blended cement concretes as measured by two different rapid methods. Cement Concr Compos 30:576–582
Gastaldini ALG, da Silva MP, Zamberlan FB, Mostardeiro Neto CZ (2014) Total shrinkage, chloride penetration, and compressive strengthof concretes that contain clear-colored rice husk ash. Constr Build Mater 54:369–377
Boddy A, Hooton RD, Gruber KA (2001) Long-term testing of the chloride-penetration resistance of concrete containing high-reactivity metakaolin. Cement Concr Res 31(4):759–765
Vu MH, Sulem J, Laudet JB (2012) Effect of the curing temperature on the creep of a hardened cement paste. Cement Concr Res 42(9):1233–1241
John J, Valenza II, Jeffrey JT (2012) Permeability and elastic modulus of cement paste as a function of curing temperature. Cement Concr Res 42(2):1440–1446
Benammar B, Mezghiche B, Guettala S (2008) Influence of atmospheric steam curing by solar energy on the compressive and flexural strength of concretes. Constr Build Mater 49:511–518
ASTM C1202 (2000) Electrical indication of concrete’s ability to resist chloride ion penetration. Annual Book of American Society for Testing Materials Standards, vol. C04.02, 2000
Tan KF, Gjϕrv OE (1996) Performance of concrete under different curing conditions. Cement Concr Res 26(3):355–361
Verbeck GJ, Helmuth RH (1968) Structure and physical properties of cement paste. In: Proceeding of the 5th International Congress on the Chemistry of Cement, Tokyo, 1968, pp 231–237
Older I, Skalny J (1973) Hydration of tricalcium silicate at elevated temperatures. J Appl Chem Biotechnol 23:18–23
Skalny J, Older I (1972) Porestructure of hydrated calcium silicates III. Influence of temperature on the pore structure of hydrated tricalcium silicate. J Colloid Interface Sci 40(2):12–17
Zhang MH, Gjϕrv OE (1991) Effect of silica fume on the pore structure and chloride diffusivity of low porosity cement pastes. Cement Concr Res 21(6):1006–1014
Acknowledgments
Financial support from Shanghai Zhongji piles industry Co., Ltd is greatly appreciated.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tan, K., Zhu, J. Influences of steam and autoclave curing on the strength and chloride permeability of high strength concrete. Mater Struct 50, 56 (2017). https://doi.org/10.1617/s11527-016-0913-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1617/s11527-016-0913-6