Abstract
Today, there is an increasing use of fiber reinforced polymer (FRP) composites in civil engineering as reinforcement of existing structures. In particular, FRP composites offer higher strength and Young’s modulus than traditional steel devices, also easy handling and installation, excellent resistance to corrosion and they can be plastered after application. When FRP wraps are used to confine compressed pillars, the effective contribution of the composite cannot be accurately evaluated because it begins to work as the stress state of the member grows. In the present paper, some theoretical relationships available in literature and in current international design guidelines, regarding the evaluation of confinement effect on wrapped concrete columns, are analyzed and compared with experimental test results. Based on these considerations, we propose a new formula that is in good agreement with the experimental test results that were produced for the purpose and reported both in the present paper and in a previously published research study. Although empiric, the proposed formula is able to reproduce the structural response of wrapped specimens and the failure mode as observed in the experimental tests.
Similar content being viewed by others
References
Alecci V, Briccoli Bati S, Ranocchiai G (2009) Study of brick masonry columns confined with CFRP composite. J Compos Constr 13(3):179–187
American Concrete Institute (ACI) (2002) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-02, Farmington Hills, Mich
Borri A, Grazini A (2004) Masonry columns strengthening with FRP materials. In: Ceriolo L, Zerbo, Cortina V (eds) Proceedings of the 2nd congress on mechanics of masonry structures strengthened with FRP-materials: modeling, testing, design, control Venice, Italy, Padova, Italy, pp 193–202 (in Italian)
Campione G (2006) Influence of FRP wrapping techniques on the compressive behavior of concrete prism. Cem Concr Compos 28(1):497–505
Campione G, Miraglia N (2003) Strength and strain capacities of concrete compression members reinforced with FRP. Cem Concr Compos 25(1):31–41
CNR (2004) Guide for the design and construction of externally bonded FRP system for strengthening existing structures. CNR-DT200/2004, CNR, Roma
Corradi M, Grazini A, Borri A (2007) Confinement of brick masonry with CFRP materials. Compos Sci Technol 67(9):1772–1783
Dai JG, Bai YL, Teng JG (2011) Behavior and modeling of concrete confined with frp composites of large deformability. J Compos Constr 15(6):963–973
De Lorenzis L, Tepfers R (2003) Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites. J Compos Constr 7(3):219–237
De Lorenzis L, Tamuzs V, Tepfers R, Valdmanis V, Vilks U (2004) Stability of CFRP-confined columns. Proceedings of international congress on innovative materials and technologies for construction and restoration, Lecce, pp 327–342
Eid R, Roy N, Paultre P (2009) Normal- and high-strength concrete circular elements wrapped with FRP composites. J Compos Constr 13(2):113–124
Erdil B, Akyuz U, Yaman IO (2012) Mechanical behavior of CFRP confined low strength concretes subjected to simultaneous heating-cooling cycles and sustained loading. Mater Struct 45:223–233
Faella C, Realfonzo R, Rizzano G (2006) Experimental behavior of R/C columns confined by FRP. In: Proceedings of the 2nd fib congress, Napoli, Italy, Losanna, Switzerland (CD-ROM)
Fahmy M, Wu Z (2010) Evaluating and proposing models of circular concrete columns confined with different FRP composites. Compos B 41(3):199–213
Fédération International du Béton (fib) (2001) Externally bonded FRP reinforcement for RC structures. Bulletin No. 14, Technical Rep, Lausanne, Switzerland
Janke L, Czaderski C, Ruth J, Motavalli M (2009) Experiments on the residual load-bearing capacity of prestressed confined concrete columns. Eng Struct 31(10):2247–2256
Karbhari VM, Gao Y (1997) Composite jacketed concrete under uniaxial compression—verification of simple design equations. Mater Civ Eng 9(4):185–193
Krevaikas TD, Triantafillou TC (2005) Masonry confinement with fiber-reinforced polymers. J Compos Constr 9(2):128–135
Lam L, Teng JG (2003) Design-oriented stress-strain model for FRP-Confined concrete. Constr Build Mater 17(6–7):471–489
Légeron F, Paultre P (2003) Uniaxial confinement model for normal- and high-strength concrete columns. J Struct Eng 129(2):241–252
Li G, Hedlund S, Pang S-S, Alaywan W, Eggers J, Abadie C (2003) Repair of damaged RC columns using fast curing FRP composites. Compos B 34(3):261–271
Maaley M, Tanwongsval S, Paramasivam P (2002) Modeling of rectangular RC columns strengthened with FRP. Cem Concr Compos 25(2):263–276
Mander JB, Priestley MJN, Park R (1988) Theoretical stress-strain model for confined concrete. J Struct Eng 114(8):1804–1826
Matthys S, Toutanji H, Audenaert K, Taerwe L (2005) Axial load behavior of large-scale columns confined with fiber-reinforced polymer composites. ACI Struct Journal 102(2):258–267
Monti G, Nisticò N, Isola R (2007) Experimental investigation on square and rectangular concrete colums confined by C-FRP. In: Proceedings of RELUIS workshop—Materiali ed Approcci Innovativi per il Progetto e la Mitigazione della Vulnerabilità Sismica delle Strutture, Salerno, Italy, Polimetrica S.a.s International Scientific Publisher, Monza, Italy, pp 99–106
Richart FE, Brandtzaeg A, Brown RL (1928) A study of the failure of concrete under combined compressive stresses. Bulletin n. 185, Engineering Experimental Station, University of Illinois, Urbana, IL
Richart FE, Brandtzaeg A, Brown RL (1929) The failure of plain and spirally reinforced concrete in compression. Bulletin n. 190, Engineering Experimental Station, University of Illinois, Urbana, IL
Rocca S, Galati N, Nanni A (2008) Review of design guidelines for FRP confinement of reinforced concrete columns of noncircular cross sections. J Compos Constr 12(1):80–92
Rousakis TC, Karabinis AI (2008) Substandard reinforced concrete members subjected to compression:FRP confining effect. Mater Struct 41(9):1595–1611
Rousakis TC, Karabinis AI (2012) Adequately FRP confined reinforced concrete columns under axial compressive monotonic or cyclic loading. Mater Struct 45(7):957–975
Rousakis TC, Chi-Sang Y, De Lorenzis L, Tamuzs V, Tepfers R (2003) Concrete cylinders confined by prestressed CFRP filament winding under axial load. In: Proceedings of the 6th international symposium on fibre reinforced polymer (FRP) reinforcement for concrete structures, Singapore, pp 581–590
Rousakis TC, Rakitzis TD, Karabinis AL (2012) Design-oriented strength model for FRP-confined concrete members. J Compos Constr (Accepted for publication)
Saadatmanesh H, Ehsani MR, Li MW (1994) Strength and ductility of concrete columns externally reinforced with fiber composite straps. ACI Struct J 91(4):434–447
Saafi M, Toutanji H, Li Z (1999) Behavior of concrete columns confined with fiber reinforced polymer tubes. ACI Mater J 96(4):500–509
Saaman M, Shahawy M, Mirmiran A (1998) Model of concrete confined by fiber composites. J Struct Eng 124(9):1025–1031
Shahawy M, Mirmiran A, Beitelman T (2000) Tests and modelling of carbon-wrapped concrete columns. Compos B 31(6):471–480
Shehata IAEM, Carneiro LAV, Shehata LCD (2002) Strength of short concrete columns confined with CFRP sheets. Mater Struct 35:50–58
Spoelstra MR, Monti G (1999) FRP-confined concrete model. J Compos Constr 3(3):143–150
Tamuzs V, Tepfers R, Sang You C, Rousakis T, Repelis I, Skruls V, Vilks U (2006) Behavior of concrete cylinders confined by carbon-composite tapes and prestressed yarns. 1: experimental data. Mech Compos Mater 42(1):13–32
Tamuzs V, Tepfers R, Sparnins E (2006) Behavior of concrete cylinders confined by carbon-composite tapes and prestressed yarns. 2: Prediction of strength. Mech Compos Mater 42(2):109–118
Tamuzs V, Tepfers R, Zile E, Ladnova O (2006) Behavior of concrete cylinders confined by carbon-composite tapes and prestressed yarns. 3: deformability and the ultimate axial strain. Mech Compos Mater 42(4):303–314
Tamuzs V, Tepfers R, Zile E, Valdmanis V (2007) Stability of round concrete columns confined by composite wrapping. Mech Compos Mater 43(5):445–452
Tamuzs V, Tepfers R, Zile E, Valdmanis V (2008) Mechanical behaviour of FRP-confined concrete columns under axial compressive loading. In: Proceedings of the 5th international engineering and construction conference. American Society of Civil Engineering, International Committee, Los Angeles Section, pp 223–241
Teng JG, Lam L (2004) Behavior and modeling of fiber reinforced polimer-confined concrete. J Struct Eng 130(11):1713–1723
Teng JG, Jiang T, Lam L, Luo YZ (2009) Refinement of a design-oriented stress-strain model for FRP-confined concrete. J Compos Constr 13(4):269–278
Toutanji H, Deng Y (2002) Strength and durability performance of concrete axially loaded members confined with AFRP composite sheets. Compos B 33(4):255–261
Valdmanis V, Tepfers R (2010) Some special features of compressed round CFRP confined concrete columns by prestressed CFRP filament winding under axial load. In: Proceedings of the 13th international congress on polymers in concrete, Madeira, Portugal, pp 745–752
Wei H, Wu Z, Guo X, Yi F (2009) Experimental study on partially deteriorated concrete columns confined with CFRP. Eng Struct 31(10):2495–2505
Wu YF, Zhou YW (2010) Unified strength model based on Hoek-Brown failure criterion for circular and square concrete columns confined by FRP. J Compos Constr 14(2):175–184
Xiao Y, Wu H (2000) Compressive behavior of concrete confined by carbon fiber composite jackets. J Mater Civ Eng 12(2):139–146
Youssef MN, Feng MQ, Mosallam AS (2007) Stress-strain model for concrete confined by FRP composites. Compos B 38(5):614–628
Zhang S, Ye L, Wing Mai Y (2000) A study on polymer composite strengthening system for concrete columns. Appl Compos Mater 7:125–138
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alecci, V., Briccoli Bati, S. & Ranocchiai, G. Concrete columns confined with CFRP wraps. Mater Struct 47, 397–410 (2014). https://doi.org/10.1617/s11527-013-0068-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-013-0068-7