Abstract
Ultra high toughness cementitious composites (UHTCC), which has metal-like deformation and crack width restricting ability, is expected to be utilized as retrofit materials. For this application, much attention needs to be paid to the working performance of structure members composed of UHTCC and existing concrete. This paper presents an investigation on the flexural behavior of plain concrete beams strengthened with UHTCC layer in tension face. The effect of UHTCC layer thicknesses on first crack load, ultimate flexural load, crack width, and load–deflection relationship is examined. The experimental results indicate that the use of UHTCC layer significantly increases the first crack load and ultimate flexural load. The first crack load and ultimate flexural load of composites beams increased with the increase of the UHTCC layer thickness. Considerable reduction in crack width was observed for composite specimens, as UHTCC layer restricted the cracks in upper concrete and dispersed them into multiple fine cracks effectively. Moreover, in comparison to plain concrete beam, composite beams could sustain the loading at a larger deflection without failure. Based on the plane section assumption, etc., a calculation method to predict the flexural capacity of composite beam was proposed. Good agreement between predictions and experiments had been obtained.
Similar content being viewed by others
References
Li VC, Wang S, Wu C (2001) Tensile strain hardening behavior of polyvinyl alcohol engineered cementitious composites (PVA-ECC). ACI Mater J 98(6):483–492
Xu SL (2007) Report on “Research and application of new material—ultra high toughness green engineered cementitious composites”. Dalian University of Technology, Dalian
Xu SL, Li HD (2008) A review on the development of research and application of ultra high toughness cementitious composites. China Civil Eng J 41(6):72–87
Li VC (1993) From micromechanics to structural engineering—the design of cementitious composites for civil engineering applications. JSCE J Struct Mech Earthquake Eng 10(2):37–48
Li VC, Leung CKY (1992) Steady state and multiple cracking of short random fiber composites. J Eng Mech ASCE 188(11):2246–2264
Shaikh FUA, Hirozo M (2007) A review on durability properties of strain hardening fiber reinforced cementitious composites. Cem Concr Compos 29:365–376
Xu SL, Cai XH, Li HD (2009) Experimental study of the durability properties of ultra-high toughness cementitious composites under freezing and thawing cycles. China Civil Eng J 42(9):42–46
Lepech MD, Li VC (2005) Water permeability of cracked cementitious composites. In: Compendium of papers, ICF 11, Turin, Italy, March 2005, CD-ROM
Kim YY, Fischer G, Li VC (2004) Performance of bridge deck link slabs designed with ductile ECC. ACI Struct J 101(6):792–801
Kojima S, Sakat N, Kanda T, Hiraishi T (2004) Application of direct sprayer ECC for retrofitting dam structure surface—application for Mitaka-Dam. Concr J 42(5):35–39
Kunieda M, Rokugo K (2006) Recent progress on HPFRCC in Japan—required performance and applications. Adv Concr Technol 4(1):19–33
Kim YY, Fischer G, Lim YM et al (2004) Mechanical performance of sprayed engineered cementitious composite using wet-mix shotcreting process for repair applications. ACI Mater J 101(1):42–49
Zhang J, Li VC (2002) Monotonic and fatigue performance in bending of fiber-reinforced engineered cementitious composite in overlay system. Cem Concr Res 32:415–423
Wang TM (2007) Control of cracking in engineering structure: principle of “resist and release” for alternative bay construction method cracking control of super long mass concrete. China Architecture & Building Press, Beijing
Feng NQ, Gu QX, Hao TY (2006) Cracking in concrete structure and its countermeasures. China Machine Press, Beijing
Xu SL, Zhang XF (2009) Theoretical and experimental investigation into flexural behavior of steel reinforced ultra high toughness cementitious composite RUHTCC beam. Sci China Ser E Technol Sci 39(5):878–896
Xu SL, Li QH (2009) Theoretical analysis on bending behavior of functionally graded composite beam crack-controlled by ultra high toughness cementitious composites. Sci China Ser E Technol Sci 39(6):1081–1094
Maalej M, Li VC (1995) Introduction of strain hardening engineered cementitious composites in design of reinforced concrete flexural members for improved durability. ACI Struct J 92(2):167–176
Li HD (2009) Experimental research on ultra high toughness cementitious composites. Dissertation, Dalian University of Technology
Acknowledgments
The authors like to express their gratitude to the supports of the National Natural Science Foundation (50438010) of China, Research on Public Welfare Technology Application Projects of Zhejiang Province, China (2010C31123).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, S.L., Wang, N. & Zhang, X.F. Flexural behavior of plain concrete beams strengthened with ultra high toughness cementitious composites layer. Mater Struct 45, 851–859 (2012). https://doi.org/10.1617/s11527-011-9803-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-011-9803-0