Abstract
Internal water curing has a significant effect on concrete. In addition to affecting hydration and moisture distribution, it influences most concrete properties, such as strength, shrinkage, cracking, and durability. The following paper is an overview of experimental methods to study internal water curing of concrete and its consequences. The special techniques needed to study internal water curing are dealt with along with the consequences of this process. Examples of applications are given and new measuring techniques that may potentially be applied to this field are addressed.
Similar content being viewed by others
References
Jensen OM, Lura P (2006) Techniques and materials for internal water curing of concrete. Mater Struct (in press)
Boucher EA (1990) Vapour pressure over free and capillary-condensed curved surfaces of aqueous salt solutions and of non-electrolyte solutions. Colloids Surf 46(2):271–281
Jensen OM, Hansen PF (2001) Water-entrained cement-based materials – I. Principles and theoretical background. Cem Concr Res 31(4):647–654
Bentz DP, Geiker M, Jensen OM (2002) On the mitigation of early age cracking. Proc. 3rd Int. Sem. on Self-desiccation and its importance in concrete technology, Lund, Sweden, pp 195–204
Jensen OM, Hansen PF (2002) Water-entrained cement-based materials – II. Experimental observations. Cem Concr Res 32(6):973–978
Grasley ZC, Lange DA, D'Ambrosia MD, Villalobos-Chapa S (2004) Embedded sensors and measurement system for internal relative humidity of concrete. Cem Concr Res (submitted)
Fagerlund G (1973) Determination of pore-size distribution from freezing-point depression. Materiaux et Constructions 6(33):215–225
Thomas JJ, FitzGerald SA, Neumann DA, Livingston RA (2001) State of water in hydrating tricalcium silicate and Portland cement pastes as measured by quasi-elastic neutron scattering. J Am Ceram Soc 84(8):1811–1816
Valckenborg RME, Pel L, Kopinga K (2002) Combined NMR cryoporometry and relaxometry. J Phys D Appl Phys 35(3):249–256
Nestle N, Dakkouri M, Zimmermann C, Geier O, Friedemann K, Dehn F, Krumbach R, Freude D, Kärger J, König G (2000) NMR studies on hardening kinetics, water balance and water transport in cement matrices for high-performance concrete. Proc. 15th European Experimental NMR Conference (EENC 2000), Leipzig, Germany
Hammer TA, Bjøntegaard Ø, Sellevold EJ (2004) Internal curing – role of absorbed water in aggregates. In: Ries JP, Holm TA (eds) ACI SP-218 High-performance structural lightweight concrete. Farmington Hills, Michigan, pp 131–142
Nielsen BS, Kronholm FL (1989) Physical bonds of water in hardened cement paste. Nordic Concr Res 7:207–221
Smeplass S (2000) Moisture in light weight aggregates—Practical consequences for the production properties of light weight aggregate concrete. Proc. 2nd Int. Symp. on structural lightweight aggregate concrete, Kristiansand, Norway, pp. 844–854
Powers TC, Brownyard TL (1948) Studies of the physical properties of hardened Portland cement paste. Res Lab Portland Cem Assoc Bull 22
Weber S, Reinhardt HW (1997) A new generation of high performance concrete: concrete with autogenous curing. Adv Cem Based Mater 6(2):59–68
Lura P, Bentz DP, Lange DA, Kovler K, Bentur A (2004) Pumice aggregates for internal water curing. In: Kovler K, Marchand J, Mindess S, Weiss J (eds) PRO 36: Proc. Int. RILEM Symp. on concrete science and engineering – a tribute to Arnon Bentur, 24 March, 2004, Northwestern University, Evanston, Illinois, RILEM Publications, S.A.R.L., pp 137–151
Lura P (2003) Autogenous deformation and internal curing of concrete. Ph.D. thesis, Delft University of Technology, Delft
Nestle N, Galvosas P, Geier O, Zimmermann C, Dakkouri M, Kärger J (2001) Nuclear magnetic resonance study of diffusion and relaxation in hydrating white cement pastes of different water content. J Appl Phys 89(12):8061–8065
Østergaard T (2001) Measurements on water entrained cement paste at NIST. GNI newsletter, http://www.gni.dk/
Lura P, Bentz DP, Lange DA, Kovler K, Bentur A, van Breugel K (2003) Measurement of water transport from saturated pumice aggregates to hardening cement paste. In: Lange D, Scrivener KL, Marchand J (eds) Proc. Advances in cement and concrete IX: Volume changes, cracking, and durability. ECI, USA, Copper Mountain, Colorado, pp 89–99
Beyea SD, Balcom BJ, Mastikhin IV, Bremner TW (2000) Imaging of heterogeneous materials with a turbo spin echo single-point imaging technique. J Magn Reson 144(2):255–265
Bremner TW, Cano J, Balcom B, Holm TA (2004) Use of magnetic imaging to study moist curing. In: Ries JP, Holm TA (eds) ACI SP-218 High-performance structural lightweight concrete. Farmington Hills, Michigan, pp 155–176
Beyea SD, Balcom BJ, Bremner TW, Prado PJ, Green DP, Armstrong RL, Grattan-Bellew PE (1998) Magnetic resonance imaging and moisture content profiles of drying concrete. Cem Concr Res 28(3):453–463
Zhutovsky S, Kovler K, Bentur A (2004) Assessment of distance of water migration in internal curing of high-strength concrete. In: Jensen OM, Bentz DP, Lura P (eds) ACI SP-220 Autogenous deformation of concrete. Farmington Hills, Michigan, pp 181–197
Bentz DP, Jensen OM (2004) Mitigation strategies for autogenous shrinkage cracking. Cem Concr Comp 26(6):677–685
Bentur A, van Breugel K (2002) Internally cured concretes. In: Bentur A (ed) Early age cracking in cementitious systems, RILEM TC 181-EAS Committee, RILEM, Cachan, pp 295–305
Hammer TA (1992) High strength LWA concrete with silica fume—Effect of water content in the LWA on mechanical properties. In: Supplementary papers in the 4th CANMET/ACI Int. Conf. On Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Istanbul, Turkey, pp 314–330
Sickert G, Schwesinger P, Haza-Radlitz GV (1999) Creep, shrinkage and creep recovery of HPLWA-concrete. In: Proc. Int. Symp. on utilization of high strength/high performance concrete, Vol. 2. Sandefjord, Norway, pp 1301–1310
van Breugel K, de Vries J (1999) Mixture optimization of HPC in view of autogenous shrinkage. In: Proc. 5th Int. Symp. on utilization of high strength/high performance concrete, Vol 2. Sandefjord, Norway, pp 1041–1050
Takada K, van K Breugel, Koenders EAB, Kaptijn N (1999) Experimental evaluation of autogenous shrinkage of lightweight aggregate concrete. In: “Autoshrink'98”, Proc. Int. Workshop, Hiroshima, Japan, 1998. E & FN SPON, London, pp 221–230
Kohno K, Okamoto T, Isikawa Y, Sibata T, Mori H (1999) Effects of artificial lightweight aggregate on autogenous shrinkage of concrete. Cem Concr Res 29(4):611–614
Bentur A, Igarashi S, Kovler K (2001) Prevention of autogenous shrinkage in high strength concrete by internal curing using wet lightweight aggregates. Cem Concr Res 31(11):1587–1591
Zhutovsky S, Kovler K, Bentur A (2002) Efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage. Mater Struct 35(246):97–101
Reinhardt H-W (2002) Autogenous and drying shrinkage of hybrid concrete. Concr Sci Eng 4(14):77–83
Dela BF (2000) Eigenstresses in hardening concrete. Ph.D. thesis, Department of Structural Engineering and Materials, Technical University of Denmark, Lyngby, Denmark
Bremner TW, Holm TA (1986) Elastic compatibility and the behavior of concrete. ACI J 83(2):244–250
Zhang MH, Gjørv OE (1999) Properties of high-strength lightweight concrete. In: Proc. Int. Symp. on Utilization of high strength/high performance concrete, Vol 1. Sandefjord, Norway, pp 683–693
Zhutovsky S, Kovler K, Bentur A (2004) Influence of cement paste matrix properties on the autogenous curing of high-performance concrete. Cem Concr Comp 26(5):499–507
Kato T, Igarashi S, Kawamura M (2004) Effects of internal curing using wet lightweight aggregate on the formation of microstructure in the interfacial zone. Proc Japan Concr Inst 26(1):675–680 (in Japanese)
Kato T (2004) Effects of internal curing on the formation of microstructure in the interfacial zone between lightweight aggregate and cement paste matrix. M. Eng. Thesis, Kanazawa University, Japan (in Japanese)
Zhang MH, Gjørv OE (1992) Penetration of cement paste into lightweight aggregate. Cem Concr Res 22(1):47–55
Wasserman R, Bentur A (1996) Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength. Cem Concr Comp 18(1):67–76
Lo Y, Gao XF, Jeary AP (1999) Microstructure of pre-wetted aggregate on lightweight concrete. Build Environ 34(6):759–764
Zhang MH, Gjørv OE (1990) Microstructure of the interfacial zone between lightweight aggregate and cement paste. Cem Concr Res 20(4):610–618
Zhang MH, Gjørv OE (1990) Pozzolanic reactivity of lightweight aggregates. Cem Concr Res 20(6):884–890
Wasserman R, Bentur A (1997) Effect of lightweight fly ash aggregate microstructure on the strength of concretes. Cem Concr Res 27(4):525–537
Lura P, Bisschop J (2004) On the origin of eigenstresses in lightweight aggregate concrete. Cem Concr Comp 26(5):445–452
Helland S, Maage M (1993) Strength loss in un-remixed LWA concrete. In: Holand I, Sellevold E (eds) Proc Int Symp utilization of high strength concrete. Lillehammer, Norway, pp 744–751
Sellevold EJ, Bjøntegaard Ø(2003) Thermal expansion coefficient (CTE) of cement paste and concrete: Effect of Moisture Content. In: Lange D, Scrivener KL, Marchand J (Eds) Advances in cement and concrete IX: volume changes, cracking, and durability, ECI, USA, Copper Mountain, Colorado, pp 27–37
Cussler EL (1984) Diffusion—Mass transfer in fluid systems. Cambridge University Press, Cambridge, pp 186–187
Holm TA (2001) Lightweight concrete and aggregates. ASTM standard technical publication 169C, 48:522–532
Hammer TA, Smeplass S (1999) The influence of lightweight aggregate properties on material properties of the concrete. In: Proc Int Symp on utilization of high strength/high performance concrete, Vol 1. Sandefjord, Norway, pp 517–532
Holm TA (1980) Performance of structural lightweight concrete in a marine environment. In: Malhotra VM (ed) ACI SP65, Proc Int Symp St Andrew by-the-sea, Canada
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lura, P., Jensen, O.M. & Igarashi, SI. Experimental observation of internal water curing of concrete. Mater Struct 40, 211–220 (2007). https://doi.org/10.1617/s11527-006-9132-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-006-9132-x