Skip to main content
Log in

Candidate wasteforms for the immobilisation of lithium sulphate-bearing nuclear wastes: A scoping study

  • Original Paper
  • Published:
MRS Advances Aims and scope Submit manuscript

Abstract

In this study, the suitability of glass and glass–ceramic wasteforms for the immobilisation of nuclear waste streams containing high concentrations of lithium sulphate was explored. The aim of the study was to maximise sulphate incorporation while also achieving acceptable waste loadings and chemical durability. An immiscible layer rich in BaSO4 and Na2SO4 formed on the surface of the glass when the sample was consolidated at lower temperatures. This surface layer disappeared when consolidation temperature was increased to 1200 °C and sulphur loss was observed via volatilisation. The glass wasteform with the highest sulphate incorporation of 2.78 wt.% SO3 (from waste loading of 11 wt.% as Li2SO4) was achieved following melting at 1200 °C. Tailored glass–ceramic wasteforms were also investigated, produced at lower temperature and with higher waste loadings. Crystalline inclusions were observed within the glass matrix at 1000 °C with 14–16 wt.% waste loading for sintered samples. The synthesised wasteforms were studied via various analytical techniques. The chemical durability was assessed using the ASTM C1285 standard test method and evaluated relative to relevant nuclear waste glasses.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

Data availability

Data available on request from the authors.

References

  1. R. Farzana et al., The incorporation of Li2SO4 into barium borosilicate glass for nuclear waste immobilisation. J. Alloy. Compd. 897, 162746 (2022)

    Article  CAS  Google Scholar 

  2. D. Caurant et al., Glasses, glass-ceramics and ceramics for immobilization of highly radioactive nuclear wastes (Nova Science, Hauppauge, 2007)

    Google Scholar 

  3. S. Tan, The incorporation and solubility of sulphate, chloride and molybdate anions in borosilicate and aluminosilicate glasses, In Thesis. 2015, University of Sheffield, Chapter 4

  4. W. Lutze, R.C. Ewing, Radioactive waste forms for the future. (1988), pp. 233–334

  5. D. Manara et al., Sulfur behavior in silicate glasses and melts: implications for sulfate incorporation in nuclear waste glasses as a function of alkali cation and V2O5 content. J. Non-Cryst. Solids 353(1), 12–23 (2007)

    Article  CAS  Google Scholar 

  6. C. Kaushik et al., Barium borosilicate glass–a potential matrix for immobilization of sulfate bearing high-level radioactive liquid waste. J. Nucl. Mater. 358(2–3), 129–138 (2006)

    Article  CAS  Google Scholar 

  7. R.K. Mishra et al., Role of sulfate in structural modifications of sodium barium borosilicate glasses developed for nuclear waste immobilization. J. Am. Ceram. Soc. 91(12), 3903–3907 (2008)

    Article  CAS  Google Scholar 

  8. M. Ooura, T. Hanada, Compositional dependence of solubility of sulphate in silicate glasses. Glass Technol. 39(2), 68–73 (1998)

    CAS  Google Scholar 

  9. J.D. Vienna et al., Toward understanding the effect of low-activity waste glass composition on sulfur solubility. J. Am. Ceram. Soc. 97(10), 3135–3142 (2014)

    Article  CAS  Google Scholar 

  10. S. Vaishnav, Structural characterization of sulphate and chloride doped glasses for radioactive waste immobilisation, in Thesis. (2018), Sheffield Hallam University, Chapter 3, 5 and 6

  11. L. Wu et al., Microstructure, sulfate retention, and aqueous stability of barite-borosilicate glass-ceramics. J. Nucl. Mater. 516, 152–159 (2019)

    Article  CAS  Google Scholar 

  12. J.M. Lonergan et al., Thermal properties of sodium borosilicate glasses as a function of sulfur content. J. Am. Ceram. Soc. 103(6), 3610–3619 (2020)

    Article  CAS  Google Scholar 

  13. R. Farzana et al., Pyrochlore glass-ceramics for the immobilization of molybdenum-99 production wastes: demonstrating scalability and flexibility to waste stream variance. J. Eur. Ceram. Soc. 41(14), 7269–7281 (2021)

    Article  CAS  Google Scholar 

  14. in ASTM C1285: Standard test methods for determining chemical durability of nuclear, hazardous, and mixed waste glasses and multiphase glass ceramics: the product consistency test (PCT). (2021)

  15. G.F. Piepel et al., Product consistency test round robin conducted by the materials characterization center—summary report (Pacific Northwest Laboratory, Richland, 1989)

    Book  Google Scholar 

  16. Eurachem/CITAC guide: Quantifying uncertainty in analytical measurement, ed. S. Ellison and A. Williams. (2012)

  17. M. Lenoir et al., Quantitation of sulfate solubility in borosilicate glasses using Raman spectroscopy. J. Non-Cryst. Solids 355(28–30), 1468–1473 (2009)

    Article  CAS  Google Scholar 

  18. C. Jantzen et al., Characterization of the defense waste processing facility (DWPF) environmental assessment (EA) glass standard reference material (Westinghouse Savannah River Co, Pittsburgh, 1993)

    Book  Google Scholar 

  19. M. Awaad, H. Mörtel, S. Naga, Densification, mechanical and microstructure properties of β-spodumene—alumina composites. J. Mater. Sci.: Mater. Electron. 16(6), 377–381 (2005)

    CAS  Google Scholar 

  20. J.D. Vienna et al., Preliminary investigation of sulfur loading in hanford law glass (Pacific Northwest National Lab. (PNNL), Richland, 2004)

    Book  Google Scholar 

Download references

Acknowledgments

The authors would like to thank Iveta Kurlapski for sample synthesis, Ilkay Chironi for TG analysis and Nuclear Science and Technology (NST) at ANSTO for materials fabrication and characterisation and the Mark Wainwright Analytical Centre, UNSW for Raman analysis.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Rifat Farzana.

Ethics declarations

Conflict of interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Information

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 183 KB)

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Farzana, R., Dayal, P., Sutton, P. et al. Candidate wasteforms for the immobilisation of lithium sulphate-bearing nuclear wastes: A scoping study. MRS Advances 8, 231–237 (2023). https://doi.org/10.1557/s43580-023-00499-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1557/s43580-023-00499-0

Navigation