Abstract
In this study, novel metastable Ti–(9–13)Nb–7Sn–(2–6)Mo alloys were developed using Bo–Md method. The Ti–Nb–Sn–Mo alloys exhibited two types of structure: β and α" + β. Ti–Nb–Sn–Mo alloys had high bending strength (1145–1255 MPa). Also, Ti–Nb–Sn–Mo alloys presented low elastic modulus (53–63 GPa). Furthermore, the moduli of resilience of Ti–Nb–Sn–Mo alloys were as high as 4.05–7.99 MJ/m3, which is significantly higher than those of commercially pure Ti (1.16 MJ/m3) and Ti–25Nb–8Sn (3.02 MJ/m3). The novel metastable Ti–11Nb–7Sn–5Mo alloy developed in this research exhibited the greatest value of the modulus of resilience, which has the potential to be used for biomedical implant applications.
Graphic abstract
Data availability
The raw/processed data required to reproduce these findings cannot be shared at this time as the data also forms part of an ongoing study.
References
L.C. Zhang, L.Y. Chen, Adv. Funct. Mater. 21, 1801215 (2019)
B.S. Lou, S.B. Wang, S.B. Hung, C.J. Wang, J.W. Lee, Thin Solid Films 660, 637–645 (2018)
H.C. Hsu, S.C. Wu, Y.J. Su, W.F. Ho, Mater. Today Commun. 26, 102059 (2021)
C.D.R. Barros, J.C. Rocha, I.N. Bastos, J.A.C.P. Gomes, J Bio-Tribo-Corrosion 7, 73 (2021)
P. Bocchetta, L.Y. Chen, J.D.C. Tardelli, A.C. Reis, F. Almeraya-Calderón, P. Leo, Coatings 11, 487 (2021)
Q. Chen, G.A. Thouas, Metallic implant biomaterials. Mater. Sci. Eng. R 87, 1–57 (2015)
I.V. Okulov, A.S. Volegov, H. Attar, M. Bönisch, S. Ehtemam-Haghighi, M. Calin, J. Eckert, J. Mech. Behav. Biomed. Mater. 65, 866–871 (2017)
R. Ummethala, P.S. Karamched, S. Rathinavelu, N. Singh, A. Aggarwal, K. Sun, E. Ivanov, L. Kollo, I. Okulov, J. Eckert, K.G. Prashanth, Materialia 14, 100941 (2020)
M. Niinomi, T. Hattori, K. Morikawa, T. Kasuga, A. Suzuki, H. Fukui, S. Niwa, Mater. Trans. 43, 2970–2977 (2002)
Y.L. Hao, S.J. Li, S.Y. Sun, C.Y. Zheng, Q.M. Hu, R. Yanga, Appl. Phys. Lett. 87, 091906 (2005)
M. Niinomi, Mater. Sci. Eng. A 243, 231–236 (1998)
M. Abdel-Hady, K. Hinoshita, M. Morinaga, Scr. Mater. 55, 477–480 (2006)
A.R.V. Nunes, S. Borborema, L.S. Araujo, J. Dille, L. Malet, L.H.D. Almeida, J. Alloys Compd. 743, 141–145 (2018)
M. Morinaga, H. Yukawa, Bull. Mater. Sci. 20, 805–815 (1997)
W.F. Ho, C.H. Pan, S.C. Wu, H.C. Hsu, J. Alloys Compd. 472, 546–550 (2009)
H.C. Hsu, S.C. Wu, S.K. Hsu, W.H. Kao, W.F. Ho, Mater. Sci. Eng. A 579, 86–91 (2013)
H.C. Hsu, S.C. Wu, S.K. Hsu, J.Y. Syu, W.F. Ho, Mater. Sci. Eng. A 568, 1–7 (2013)
E. Yılmaz, A. Gökçe, F. Findik, H.Ö. Gülsoy, J. Therm. Anal. Calorim. 134, 7–14 (2018)
S. Ehtemam-Haghighi, H. Attar, I.V. Okulov, M.S. Dargusch, D. Kent, J. Alloys Compd. 853, 156768 (2021)
L. Zhao, X. Pei, L. Jiang, C. Hu, J. Sun, F. Xing, C. Zhou, Y. Fan, X. Zhang, Compos. B. Eng. 162, 154–161 (2019)
P.F. Yang, M. Sanno, B. Ganse, T. Koy, G.P. Bruggemann, L.P. Müller, J. Rittweger, PLoS ONE 9, e94525 (2014)
E.F. Morgan, G.U. Unnikrisnan, A.I. Hussein, Annu. Rev. Biomed. Eng. 20, 119–143 (2018)
A. Guha, Metals Handbook, 9th edn., vol. 8, ed. by H.E. Boyer, T.L. Gall (Metals Park, Ohio, 1985), pp. 133–136.
K.K. Wong, H.C. Hsu, S.C. Wu, W.F. Ho, J. Alloys Compd. 868, 159137 (2021)
S.S. Singh, H. Singh, M.A.H. Gepreel, Mater. Sci. Eng. A 121, 111661 (2021)
W.F. Ho, C.P. Ju, J.H. Chern Lin, Biomaterials 20, 2115–2122 (1999)
E. Ghassemali, R. Sonkusare, K. Biswas, N.P. Gurao, J. Alloys Compd. 710, 539–546 (2017)
Q. Wang, Y. Lu, Q. Yu, Z. Zhang, Sci. Rep. 8, 14910 (2018)
R.P. Kolli, A. Devaraj, Metals 506, 1–41 (2018)
R.E. Smallman, R.J. Bishop, Modern Physical Metallurgy and Materials Engineering, 6th edn. (Butterworth-Heinemann, UK, 1999)
B. Verlinden, J. Driver, I. Samajdar, R. Doherty, Thermo-Mechanical Processing of Metallic Materials, 1st edn. (Elsevier Science, Nederland, 2007)
D. Wojtas, K. Wierzbanowski, R. Chulist, W. Pachla, M. Bieda-Niemiec, A.J. Bska, Ł Maj, J. Kawałko, M. Marciszko-Wiackowska, M. Wronski, K. Sztwiertnia, J. Alloys Compd. 837, 155576 (2020)
Acknowledgments
The authors acknowledge the partial financial support of the Ministry of Science and Technology of Taiwan (MOST 105-2815-C-390-003-E; 108-2221-E-390-010).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Rights and permissions
About this article
Cite this article
Hsu, HC., Wong, KK., Wu, SC. et al. Structure and properties of metastable Ti–Nb–Sn–Mo alloys. MRS Communications 11, 669–674 (2021). https://doi.org/10.1557/s43579-021-00095-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/s43579-021-00095-z