Abstract
Microporous metal entangled structure (MES) can reduce various hazards caused by vibration due to its good damping energy dissipation. However, its bearing capacity is weak and cannot realize the multi-functional characteristics of high damping and high stiffness. In this work, a kind of interpenetrating metal entangled structure/silicone rubber composite (MES-SRC) is developed, which is composed of MES as the skeleton and the silicone rubber as the matrix. The dynamic mechanical tests of MES-SRC, MES, and silicone rubber are conducted, and their dynamic properties, including bearing capacity, damping energy dissipation, and damping, are quantitatively characterized. The test results show that the bearing capacity and damping energy dissipation of MES-SRC are higher. Through the analysis of the mesostructure of MES-SRC, the damping energy dissipation mechanism of MS-SRC is studied. The effects of vibration conditions and process parameters of MES on dynamic properties of MES-SRC are studied, and the reasons for the effects are explained from the mesostructure.
Graphical abstract
Similar content being viewed by others
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Y. Zhengfeng, Y. Dale, Z. Nong et al., Overview of vibration problems and solutions of automotive power transmission system. J. Hefei Univ. Technol. (Natural Science) 44(03), 289–298 (2021)
X.A. Vasanth, P.S. Paul, G. Lawrance et al., Vibration control techniques during turning process: a review. Aust. J. Mech. Eng. 19(2), 221–241 (2021)
P. Gao, T. Yu, Y. Zhang et al., Vibration analysis and control technologies of hydraulic pipeline system in aircraft: a review. Chin. J. Aeronaut. 34(04), 83–114 (2021)
B. Wang, P.X. Gao, H. Ma et al., A review on dynamic characteristics of aero-engine pipeline system. Acta Aeronaut. (in Chinese) 40, 1–25 (2021). https://doi.org/10.7527/S1000-6893.2021.25332
A.H.R. Talebi, S.A.S. Roknizadeh, A. Reza et al., Magneto-electro-mechanical vibration of porous functionally graded smart sandwich plates with viscoelastic core. Proc. Inst. Mech. Eng. L 235(3), 653–670 (2021)
O. Ranaei, A.A. Aghakouchak, Experimental and numerical study on developed elastomeric layers based on natural and butyl matrix rubbers for viscoelastic dampers. Mech. Time Depend. Mater. (2021). https://doi.org/10.1007/s11043-021-09484-2
W. Liu, N. Li, Z. Zhong et al., Novel cast-aged MnCuNiFeZnAl alloy with good damping capacity and high usage temperature toward engineering application. Mater. Des. 106, 45–50 (2016)
Y.K. Wu, J.W. Xu, X.C. Wang et al., The effect of damping components on the interfacial dynamics and tribological behavior of high-speed train brakes. Appl. Acoust. 178, 107962 (2021)
X. Zhang, R. Wang, X. Li et al., Energy absorption performance of open-cell aluminum foam and its application in landing buffer system. J. Mater. Eng. Perform. (2021). https://doi.org/10.1007/s11665-021-05823-z
P. Albertelli, S. Esposito, V. Mussi et al., Effect of metal foam on vibration damping and its modelling. Int. J. Adv. Manuf. Technol. (2021). https://doi.org/10.1007/s00170-021-07172-6
Z. Xu, C.S. Ha, R. Kadam et al., Additive manufacturing of two-phase lightweight, stiff and high damping carbon fiber reinforced polymer microlattices. Add. Manuf. 32, 101106 (2020)
T. Wang, Study on Integration Design of Structural Damping of Structural Damping of Carbon Fiber Reinforced Epoxy Matrix Composites (Shandong University, Jinan, 2019)
A. Raju, M. Shanmugaraja, Recent researches in fiber reinforced composite materials: a review. Mater. Today 46, 9291–9296 (2021)
D.Y. Zhang, Y. Xia, Q.C. Zhang et al., Researches on metal rubber mechanics properties in retrospect and prospect. J. Aerosp. Power 33(06), 1432–1445 (2018)
Z. Ren, L. Shen, H. Bai et al., Study on the mechanical properties of metal rubber with complex contact friction of spiral coils based on virtual manufacturing technology. Adv. Eng. Mater. 22(8), 2000382 (2020)
Y. Ma, Q. Zhang, D. Zhang et al., Tuning the vibration of a rotor with shape memory alloy metal rubber supports. J. Sound Vib. 351, 1–16 (2015)
X. Cao, C. Wei, J. Liang et al., Design and dynamic analysis of metal rubber isolators between satellite and carrier rocket system. Mech. Sci. 10(1), 71–78 (2019)
H. Fu, Z. Hua, L. Zou et al., Combined stiffness characteristic of metal rubber material under vibration loads. Proc. Inst. Mech. Eng. C 233(17), 6076–6088 (2019)
L. Chengzhuang, L. Jingyuan, Z. Bangyang, An experimental study on stiffness characteristics and damping of metal rubber. J. Vib. Shock 36(8), 203–208 (2017)
J.P. dos Santos Lopes, Effects of Design Parameters on Damping of Composite Materials for Aeronautical Applications (Universidade da Beira Interior (Portugal), Covilhã, 2013)
A. Lu, L. Zhao, Y. Liu et al., Enhanced damping capacity in graphene-Al nanolaminated composite pillars under compression cyclic loading. Metall. Mater. Trans. A 51(4), 1463–1468 (2020)
P.R. Matli, V. Manakari, G. Parande et al., Improving mechanical, thermal and damping properties of NiTi (nitinol) reinforced aluminum nanocomposites. J. Compos. Sci. 4(1), 19 (2020)
C. Zheng, F. Duan, S. Liang, Manufacturing and mechanical performance of novel epoxy resin matrix carbon fiber reinforced damping composites. Compos. Struct. 256, 113099 (2021)
M.D. Kumar, C. Senthamaraikannan, S. Jayasrinivasan et al., Study on static and dynamic behavior of jute/sisal fiber reinforced epoxy composites. Mater. Today 46, 9425–9428 (2021)
Y. Li, H. Li, C. Jin, Effect of multi-walled carbon nanotubes on the damping property of cement mortar and mechanism analysis. Arch. Civ. Mech. Eng. 21(3), 1–14 (2021)
W. Yu, X. Li, M. Vallet et al., High temperature damping behavior and dynamic Young’s modulus of magnesium matrix composite reinforced by Ti2AlC MAX phase particles. Mech. Mater. 129, 246–253 (2019)
Y. Li, S. Cai, X. Huang, Multi-scaled enhancement of damping property for carbon fiber reinforced composites. Compos. Sci. Technol. 143, 89–97 (2017)
M. Rafiee, F. Nitzsche, M.R. Labrosse, Fabrication and experimental evaluation of vibration and damping in multiscale graphene/fiberglass/epoxy composites. J. Compos. Mater. 53(15), 2105–2118 (2019)
M. Akhtar, A. Khajuria, Probing true microstructure-hardening relationship in simulated heat affected zone of P91B steels. Metallogr. Microstruct. Anal. 8(5), 656–677 (2019)
M. Akhtar, A. Khajuria, J.K. Sahu et al., Phase transformations and numerical modelling in simulated HAZ of nanostructured P91B steel for high temperature applications. Appl. Nanosci. 8(7), 1669–1685 (2018)
Y. Wang, Z. Zhang, X. Xue et al., Experimental investigation on enhanced mechanical and damping performance of corrugated structure with metal rubber. Thin-Walled Struct. 154, 106816 (2020)
X. Zheng, Z. Ren, L. Shen et al., Dynamic performance of laminated high-damping and high-stiffness composite structure composed of metal rubber and silicone rubber. Materials 14(1), 187 (2021)
F.A. Sabet, F.Y. Su, J. McKittrick et al., Mechanical properties of model two-phase composites with continuous compared to discontinuous phases. Adv. Eng. Mater. 20(10), 1800505 (2018)
W. Yu, H. Li, Z. Zhao et al., Compressive mechanical properties of foam aluminum-epoxy interpenetrating phase composites. Fuhe Cailiao Xuebao 29(4), 224–230 (2012)
S. Liu, A. Li, Hysteretic friction behavior of aluminum foam/polyurethane interpenetrating phase composites. Compos. Struct. 203, 18–29 (2018)
S. Liu, A. Li, P. Xuan, Mechanical behavior of aluminum foam/polyurethane interpenetrating phase composites under monotonic and cyclic compression. Compos. A 116, 87–97 (2019)
Z. Jiang, F. Wang, J. Yin et al., Vibration damping mechanism of CuAlMn/polymer/carbon nanomaterials multi-scale composites. Compos. B 199, 108266 (2020)
X. Wang, Y. Zhou, J. Li et al., Uniaxial compression mechanical properties of foam nickel/iron-epoxy interpenetrating phase composites. Materials 14(13), 3523 (2021)
V.M. Kulik, A.V. Boiko, S.P. Bardakhanov et al., Viscoelastic properties of silicone rubber with admixture of SiO2 nanoparticles. Mater. Sci. Eng. A 528(18), 5729–5732 (2011)
E. Cho, L.L.Y. Chiu, M. Lee et al., Characterization of mechanical and dielectric properties of silicone rubber. Polymers 13(11), 1831 (2021)
Y.J. Cai, C.C. Zhang, L.L. Wu et al., Mechanical damping properties of silicone rubber prepared by nano-SiO2 and AGE-modified polysiloxane blends. Adv. Mater. Res. 337, 41–45 (2011)
S. Qi, M. Yu, J. Fu et al., An EPDM/MVQ polymer blend based magnetorheological elastomer with good thermostability and mechanical performance. Soft Matter 14(42), 8521–8528 (2018)
A. Zolriasatein, S. Navazani, M.R. Abadchi et al., Two-component room temperature vulcanized silicone-rubber (RTV2) properties modification: effect of aluminum three hydrate and nanosilica additions on the microstructure, electrical, and mechanical properties. J. Mater. Sci.: Mater. Electron. 32(7), 8903–8915 (2021)
X. Xue, P. Yang, Y. Shao et al., Manufacture technology and anisotropic behaviour of elastic-porous metal rubber. Int. J. Lightweight Mater. Manuf. 3(2), 88–99 (2020)
J. Beter, B. Schrittesser, B. Maroh et al., Comparison and impact of different fiber debond techniques on fiber reinforced flexible composites. Polymers 12(2), 472 (2020)
Acknowledgments
We thank National Natural Science Foundation of China (Grant No. 52175162, 51805086 and 51975123), Natural Science Foundation of Fujian Province (Grant No. 2019J01210), and Health education joint project of Fujian Province (Grant No. 2019-WJ-01).
Author information
Authors and Affiliations
Contributions
ZR contributed to formal analysis, visualization, and writing—review & editing. CL contributed to investigation, conceptualization, and tests. XZ and TZ contributed to data curation. HB contributed to resources.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Ren, Z., Li, C., Zheng, X. et al. Study on dynamic properties of metal entangled structure/silicone rubber interpenetrating composite. Journal of Materials Research 37, 1102–1114 (2022). https://doi.org/10.1557/s43578-022-00500-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/s43578-022-00500-w