Skip to main content

Advertisement

SpringerLink
Log in

Regulatory and standards development in medical additive manufacturing

  • MRS Bulletin Review
  • Published:
MRS Bulletin Aims and scope Submit manuscript

Abstract

Regulations and associated standards are crucial for any emerging technologies as it matures and gains broader acceptance. Additive manufacturing (AM) is one such emerging technology that revolutionizes the way we manufacture parts in a range of industries. The healthcare industry was one of the early adopters of AM technology, identifying its unique capabilities to allow mass device personalization and complex structures. Since health care is a highly regulated industry, the capability demonstration of AM technology alone is insufficient to provide confidence in the use of parts produced using this technology. The safety and efficacy of the parts made by AM are demonstrated and approved through a regulatory framework supported by robust standards. This article reviews the regulatory and standard development activities in AM applied to medical devices. The progress in developing the regulatory framework for additively manufactured medical devices across different geographic domains is discussed. In addition, standards gaps and published standards that apply to AM medical devices are highlighted.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3

Similar content being viewed by others

References

  1. M. Di Prima, J. Coburn, D. Hwang, J. Kelly, A. Khairuzzaman, L. Ricles, Additively manufactured medical products—the FDA perspective. 3D Print. Med. 2, 1 (2016). https://doi.org/10.1186/s41205-016-0005-9

    Article  Google Scholar 

  2. H. Dodziuk, Applications of 3D printing in healthcare. Pol. J. Thorac. Cardiovasc. Surg. 13(3), 283 (2016). https://doi.org/10.5114/kitp.2016.62625

    Article  Google Scholar 

  3. R.J. Morrison, S.J. Hollister, M.F. Niedner, M.G. Mahani, A.H. Park, D.K. Mehta, R.G. Ohye, G.E. Green, Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients. Sci. Transl. Med. 7(285), 285ra64 (2015). https://doi.org/10.1126/scitranslmed.3010825

    Article  Google Scholar 

  4. Society of Manufacturing Engineers, Medical Additive Manufacturing/3d Printing Annual Report 2018. https://www.sme.org/smemedia/white-papers-and-reports/medical-additive-manufacturing-3d-printing-annual-report-2018. Accessed 7 Aug 2021

  5. A. Hagen, M. Chisling, K. House, T. Katz, L. Abelseth, I. Fraser, S. Bradley, R. Kirsch, J. Morris, J.W. Giles, S.M. Willerth, 3D printing for medical applications: current state of the art and perspectives during the COVID-19 crisis. Surgeries 29(3), 244 (2021). https://doi.org/10.3390/surgeries2030025

    Article  Google Scholar 

  6. https://www.accessdata.fda.gov/cdrh_docs/pdf10/K102975.pdf. Accessed 20 Sept 2021

  7. K. Dalgarno, The Impact and Potential for 3D Printing and Bioprinting in the Medical Devices Industry (2020). https://www.medical-device-regulation.eu/wp-content/uploads/2020/09/WP_3D_web_pdf.pdf. Accessed 4 August 2021

  8. S.-H. Ahn, M. Montero, D. Odell, S. Roundy, P.K. Wright, Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp. J. 8(4), 248 (2002). https://doi.org/10.1108/13552540210441166

    Article  Google Scholar 

  9. F. Górski, R. Wichniarek, W. Kuczko, P. Zawadzki, P. Buń, Strength of ABS parts produced by fused deposition modelling technology–a critical orientation problem. Adv. Sci. Technol. Res. J. 9(26), 12 (2015)

    Article  Google Scholar 

  10. C. Ziemian, M. Sharma, S. Ziemian, Anisotropic mechanical properties of ABS parts fabricated by fused deposition modelling, in Mechanical Engineering. ed. by M. Gokcek (2012). https://cdn.intechopen.com/pdfs/35261/InTech-Anisotropic_mechanical_properties_of_abs_parts_fabricated_by_fused_deposition_modelling.pdf. Accessed 20 Sept 2021

  11. Medical Device Regulations-Global Overview and Guiding Principles (World Health Organization, Geneva, Switzerland, 2003). https://www.who.int/medical_devices/publications/en/MD_Regulations.pdf. Accessed 4 Aug 2021

  12. Classify Your Medical Device (US Food and Drug Administration, Washington, DC). https://www.fda.gov/medical-devices/overview-device-regulation/classify-your-medical-device. Accessed 5 Aug 2021

  13. Guidelines for Compliance: Medical Equipment Made by 3D Printing and Additive Manufacturing (n.d.). https://code-authorities.ul.com/wp-content/themes/countries/downloads/am/3D-PRINTING-MEDICAL-COMPLIANCE-.pdf. Accessed 5 Aug 2021

  14. Definitions for Personalized Medical Devices (International Medical Device Regulators Forum, IMDRF/PMD WG/N49 FINAL:2018). http://www.imdrf.org/docs/imdrf/final/technical/imdrf-tech-181018-pmd-definitions-n49.pdf. Accessed 7 Aug 2021

  15. US Food and Drug Administration, Custom Device Exemption—Guidance for Industry and Food and Drug Administration Staff. https://www.fda.gov/media/89897/download. Accessed 24 Sept 2014

  16. US Food and Drug Administration, Premarket Notification 510(k) (2020). https://www.fda.gov/medical-devices/premarket-submissions/premarket-notification-510k. Accessed 5 Aug 2021

  17. R.J. Morrison, K.N. Kashlan, C.L. Flanagan, J.K. Wright, G.E. Green, S.J. Hollister, K.J. Weatherwax, Regulatory considerations in the design and manufacturing of implantable 3D-printed medical devices. Clin. Transl. Sci. 8(5), 594 (2015). https://doi.org/10.1111/cts.12315

    Article  Google Scholar 

  18. US Food and Drug Administration, Technical Considerations for AM Medical Devices—Guidance for Industry and Food and Drug Administration Staff (2017). https://www.fda.gov/media/97633/download. Accessed 24 Sept 2021

  19. New Guidance from China FDA on 3D Printed Medical Device Registration Rules (2018). https://www.emergobyul.com/blog/2018/03/new-guidance-china-fda-3d-printed-medical-device-registration-rules-0. Accessed 9 Aug 2021

  20. Personalised Medical Devices (Including 3D Printed Devices). Regulatory Changes for Custom-Made Medical Devices, Version 4.0 (Australian Government, Department of Health, Therapeutic Goods Administration [TGA], August 2021). https://www.tga.gov.au/sites/default/files/personalised-medical-devices-including-3d-printed-devices.pdf. Accessed 24 Sept 2021

  21. Health Canada, Government of Canada, Guidance Document—Supporting Evidence for Implantable Medical Devices Manufactured by 3D Printing (2019). https://www.canada.ca/en/health-canada/services/drugs-health-products/medical-devices/application-information/guidance-documents/3d-licensing-requirements/document.html. Accessed 9 Aug 2021

  22. Regulatory Guideline for 3D-Printed Medical Devices (Health Sciences Authority, Singapore, July 2021). https://www.hsa.gov.sg/docs/default-source/hprg-mdb/gudiance-documents-for-medical-devices/regulatory-guideline-for-3d-printed-medical-devices.pdf. Accessed 27 Sept 2021

  23. A. Horst, F. McDonald, Uncertain but not unregulated: medical product regulation in the light of three-dimensional printed medical products. 3D Print. Addit. Manuf. 7(5), 248 (2020). https://doi.org/10.1089/3dp.2020.0076

    Article  Google Scholar 

  24. 10 of the Biggest Challenges in Scaling Additive Manufacturing for Production in 2020 [Expert Roundup] (2019). https://amfg.ai/2019/10/08/10-of-the-biggest-challenges-in-scaling-additive-manufacturing-for-production-expert-roundup. Accessed 9 Aug 2021

  25. M. Seifi, M. Gorelik, J. Waller, N. Hrabe, N. Shamsaei, S. Daniewicz, J.J. Lewandowski, Progress towards metal additive manufacturing standardization to support qualification and certification. JOM 69(3), 439 (2017)

    Article  Google Scholar 

  26. M. Bangert, Additive manufacturing standards, in Quality Magazine. (2021). https://www.qualitymag.com/articles/96498-additive-manufacturing-standards. Accessed 9 Aug 2021

  27. Standardization Roadmap for Additive Manufacturing, Version 2.0 (American National Standards Institute [ANSI] and National Center for Defense Manufacturing and Machining [NCDMM]/America Makes, June 2018). https://www.ansi.org/standards-coordination/collaboratives-activities/additive-manufacturing-collaborative. Accessed 28 Sept 2021

  28. https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfstandards/search.cfm. Accessed 11 Aug 2021

  29. 3D Printing In Healthcare: Where Are We In 2021? (Updated). https://amfg.ai/2019/08/30/3d-printing-in-healthcare-where-are-we-in-2019. Accessed 23 Sept 2021

  30. https://standards.ieee.org/project/3333_2_3.html. Accessed 11 Aug 2021

  31. https://www.dicomstandard.org/activity/wgs/wg-17. Accessed 11 Aug 2021

Download references

Author information

Authors and Affiliations

  1. ASTM Asia Pacific Ltd., Singapore, Singapore

    Khalid Rafi & Alexander Zhonghong Liu

  2. ASTM International, Washington, DC, USA

    Paul Bates & Mohsen Seifi

  3. US Food and Drug Administration, Silver Spring, USA

    Matthew Di Prima

  4. Case Western Reserve University, Cleveland, OH, USA

    Mohsen Seifi

Authors
  1. Khalid Rafi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Alexander Zhonghong Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Matthew Di Prima
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Paul Bates
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Mohsen Seifi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mohsen Seifi.

Ethics declarations

Conflict of interest

On behalf of all authors, the corresponding author states that there is no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Rafi, K., Zhonghong Liu, A., Di Prima, M. et al. Regulatory and standards development in medical additive manufacturing. MRS Bulletin 47, 98–105 (2022). https://doi.org/10.1557/s43577-022-00266-w

Download citation

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1557/s43577-022-00266-w

Keywords

Search

Navigation