Abstract
Due to the potential applications to high-efficiency and light-weight solar cells, the growth of CuInGaSe2 (CIGS) nanoparticles is a recent research focus. We have developed a relatively simple solvothermal route to grow high quality CIGS nanoparticles in an autoclave under different temperatures (170 – 280°C). The effect of reaction temperature on the shape of CIGS nanoparticles has been investigated. At lower temperatures, the CIGS particles show plate-like shape. Whereas at higher temperatures, most of them exhibit rod-like feature. The nanoparticle products have been also characterized by field emission scanning electron microscopy and X-ray diffraction techniques.
This is a preview of subscription content, access via your institution.
References
A. Romeo, M. Terheggen, D. Abou-Ras, D. L. Batzner, F. J. Haug, M. Kalin, D. Rudmann, and A. N. Tiwari, “Development of thin film Cu(In,Ga)Se2 and CdTe solar cells,” Prog. Photovolt: Res. Appl. 12, 93(2004).
P. Jackson, D. Hariskos, E. Lotter, S. Paetel, R. Wuerz, R. Menner, W. Wischmann, and M. Powalla, “New world record efficiency for Cu(In,Ga)Se2 thin film solar cells beyond 20%,” Prog. Photovolt: Res. Appl. 19, 894(2011).
M. Bar, I. Repins, M. A. Contreras, L. Weinhardt, R. Noufi, and C. Heske, “Chemical and electronic surface structure of 20%-efficient Cu(In,Ga)Se2 thin film solar cell absorbers,” Appl. Phy. Lett., 95, 052106(2009).
A. Ennaoui, S. Fiechter, C. Pettenkofer, N. Alonso-Vante, K. Buker, M. Bronold, C. Hopfner and H. Tributsch, “Iron disulfide for solar energy conversion, Solar Energy Materials and Solar Cells,” 29, 289(1993).
M. Gloeckler, PhD dissertation, “Device physics of CIGS solar cells,” Colorado State University, Colorado, USA (2005).
L. A. Juhaiman, L. Scoles, D. Kingston, B. Patarachao, D. Wang, and F. Bensebaa, “Green synthesis of tunable CIGS nanoparticles using non-organic solvents,” Green Chem., 12, 1248(2010).
T. Siritanon, T. Sarakonsri, and C. Thanachayanont, “The preparation of CIGS by a solution route method,” J. Cera. Proc. Research, 10, 437(2009).
K. H. Kim, Y. G. Chun, B. O. Park, and K. H. Yoon, “Synthesis of CuInSe2 and CuInGaSe2 nanoparticles by solvothermal route,” Mater. Sci. Forum, 273, 449(2004).
S. J. Ahn, K. H. Kim, Y. G. Chun, and K. H. Yoon, “Nucleation and growth of CIGS nanoparticles in low temperature colloidal process,” Thin Solid Films, 515, 4036(2007).
V. Alberts and M. L. Chenene, “Material properties of CIGS thin films prepared by the reaction of thermally evaporated compound materials in H2Se/Ar.” Semicond. Sci. Technol. 18, 870(2003).
S. L. Castro, S. G. Bailey, R. P. Raffaelle, K. K. Banger, and A. F. Hepp, “Synthesis and characterization of colloidal CuInS2 nanoparticles from a molecular single-source precursor.” J. Phys. Chem. B, 108, 12429(2004).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zhang, L., Dong, L. Synthesis and Nanostructure Control of CIGS Nanoparticles by Solvothermal Route. MRS Online Proceedings Library 1784, 15209605101 (2015). https://doi.org/10.1557/opl.2015.627
Published:
DOI: https://doi.org/10.1557/opl.2015.627