Skip to main content
Log in

Interface Orientation Distribution during Grain Growth in Bulk SrTiO3 Measured by Means of 3D X-Ray Diffraction Contrast Tomography

  • Published:
MRS Online Proceedings Library Aims and scope

Abstract

3D x-ray diffraction contrast tomography (DCT) is a non-destructive technique for the determination of grain shape and crystallography in polycrystalline bulk materials. Using this technique, a strontium titanate specimen was repeatedly measured between annealing steps.. A systematic analysis of the growth history of selected grains before and after the ex-situ annealing step allows to extract the topological and morphological changes during grain growth. Furthermore, misorientation as well as interface orientation information of the microstructure reconstructions have been determined. The interface normal distribution clearly shows a preference for (100) oriented interfaces in the selected grains when annealed at 1600°C. This observation can be connected to existent interfacial energy estimations resulting from capillarity vector reconstructions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. S. Lee, W. Sigle, W. Kurtz and M. Rühle. Acta Mat., 51 975 (2003)

    Article  CAS  Google Scholar 

  2. G. Johnson, A. King, M.G. Honnicke, J. Marrow and W. Ludwig, J. Appl. Cryst. 41, 310 (2008)

    Article  CAS  Google Scholar 

  3. T. Sano, D.M. Saylor, and G.S. Rohrer, J. Amer. Ceram. Soc., 86, 1933 (2003)

    Article  CAS  Google Scholar 

  4. M. Bäurer, D. Weygand, P. Gumbsch and M. Hoffmann. Scripta Mat., 61 584 (2009)

    Article  Google Scholar 

  5. M. Bäurer, H. Kungl and M. Hoffmann. Journal of the American Ceramic Society, 92 601 (2009)

    Article  Google Scholar 

  6. M. Syha, W. Rheinheimer, M. Bäurer, E.M. Lauridsen, W. Ludwig, D. Weygand, and P. Gumbsch, Scripta Mat. 66, 1 (2011)

    Article  Google Scholar 

  7. W. Ludwig, P. Reischig, A. King, M. Herbig, E.M. Lauridsen, G. Johnson, T. Marrow and J. Buffiere, Rev. Sci. Instr. 80, 33905 (2009)

    Article  CAS  Google Scholar 

  8. M. Bäurer, S. J. Shih, Catherine M. Bishop, M. P. Harmer, D. Cockayne, M. J. Hoffmann, Acta. Mat., 58, 290 (2010)

    Article  Google Scholar 

Download references

Acknowledgments

This work was supported by the Deutsche Forschungsgemeinschaft (DFG) under Contract WE3544/4-1 and BA4143/2-1. We kindly acknowledge the Karlsruhe House of Young Scientists (KHYS) for covering travel expenses of one of the authors (M.S.), the European Synchrotron Radiation Facility (ESRF) for provision of beam time (MA-970) and Loredana Erra, beam line ID11, for technical support.

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Syha, M., Rheinheimer, W., Bäurer, M. et al. Interface Orientation Distribution during Grain Growth in Bulk SrTiO3 Measured by Means of 3D X-Ray Diffraction Contrast Tomography. MRS Online Proceedings Library 1421, 58–62 (2012). https://doi.org/10.1557/opl.2012.831

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1557/opl.2012.831

Navigation