Abstract
Hierarchically porous materials are of interest in a wide range of applications. If the materials are electronic, or ionic conductors, such materials are of interest as electrodes for use in fuel cells. Using hierarchically porous silica as templates, we have demonstrated the formation of hierarchically porous metal and metal oxide structures. Through the control of the synthesis conditions, we have produced partial replicas ca. 1 cubic centimeter in volume, in which two macroporous networks are separated by a nanoporous membrane. The macroporous network in the silica template is known to be bicontinuous. Our underlying model predicts that the second, induced, macroporous network should be similarly bicontinuous.
Micrometer resolution X-ray tomography of the whole sample confirms that the synthesis produces one bicontinuous macroporous network, and is consistent with the existence of a second set of macropores. Preliminary experiments were carried out using FIB/SEM serial tomography to image the second macropore network, however, the length scale of the structures is such that this approach it is unable to firmly establish that the second macropore network is bicontinuous throughout the entire sample volume.
Similar content being viewed by others
References
A. El Kadib; R. Chimenton; A. Sachse; F. O. Fajula; A. Galarneau; B. Coq “Functionalized Inorganic Monolithic Microreactors for High Productivity in Fine Chemicals Catalytic Synthesis”, Angew. Chem. Int. Ed., 121, 5069–5072 (2009).
A. Sachse; A. Galarneau; F. O. Fajula; F. Di Renzo; P. Creux; B. Coq “Functional silica monoliths with hierarchical uniform porosity as continuous flow catalytic reactors”, Micro. Meso. Mater., 140, 58–68 (2011).
K. Nakanishi “Pore Structure Control of Silica Gels Based on Phase Separation”, J. Porous. Mat., 4, 67–112 (1997).
J.-H. Smått; S. Schunk; M. Lindén “Versatile Double-Templating Synthesis Route to Silica Monoliths Exhibiting a Multimodal Hierarchical Porosity”, Chem. Mater., 15, 2354–2361 (2003).
A. Taguchi; J.-H. Smatt; M. Linden “Carbon Monoliths Possessing a Hierarchical, Fully Interconnected Porosity”, Adv. Mat., 15, 1209–1211 (2003).
J.-H. Smått; B. Spliethoff; J. B. Rosenholm; M. Lindén “Hierachically porous nanocrystalline cobalt oxide monoliths through nanocasting”, Chem. Comm., 2188–2189 (2004).
J.-H. Smått; C. Weidenthaler; J. B. Rosenholm; M. Lindén “Hierarchically Porous Metal Oxide Monoliths Prepared by the Nanocasting Route”, Chem. Mater., 18, 1443–1450 (2006).
X. Feng; R. Y. M. Huang “Liquid Separation by Membrane Pervaporation: A Review”, Ind. Eng. Chem. Res., 36, 1048–1066 (1997).
A. Gabelman; S.-T. Hwang “Hollow Fiber Membrane Contactors”, J. Membrane Sci., 159, 61–106 (1999).
J. Lee; H. K. Lee; K. E. Rasmussen; S. Pedersen-Bjergaard “Environmental and bioanalytical applications of hollow fiber membrane liquid-phase microextraction: A review”, Anal. Chim. Acta., 624, 253–268 (2008).
Acknowledgments
Primary support for this work was provided by NSF CHE-0719398 (MGB), and by an REU position (KLG) provided by CHE 1004098. Electron microscopy was carried out in the Central Analytical Facility at The University of Alabama.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Grano, A.J., Sayler, F.M., Genau, A. et al. X-ray and FIB Tomography of Extremely High Surface Area Nanostructured Hollow Fiber Membranes. MRS Online Proceedings Library 1421, 41–46 (2012). https://doi.org/10.1557/opl.2012.431
Published:
Issue Date:
DOI: https://doi.org/10.1557/opl.2012.431