Abstract
The microstructure and compression response of a quaternary Mo-Nb-Si-B alloy has been examined in in the temperature interval 1200°C-1600°C and in the strain rate regime 10–4 s–1 to 10–6 s–1 and compared to earlier results on the ternary Mo-Si-B alloys The microstructure is composed of a three-phase microlamellar eutectic composed of the Mo-Nb solid solution phase, the T1 and the T2 intermetallic phases. Compression test confirm significantly superior creep resistance for the eutectic alloy compared to the ternary Mo-rich Mo-Si-B alloys with virtually no microstructural degradation.
This is a preview of subscription content, access via your institution.
References
B.P. Bewlay, M.R. Jackson, J-C. Zhao, P.R. Subramanian, M.G. Mendiratta and J.J.. Lewandowski, MRS Bulletin, 28, 646 (2003).
D.M. Dimiduk and J.H. Perepezko, MRS Bulletin, 28, 639 (2003).
J.H. Perepezko, R. Sakidja and K.S. Kumar, “Mo-Si-B Alloys for Ultra-High Temperature Applications”, Advanced Structural Materials: Properties, Design Optimization and Applications, ed. W.O. Soboyejo and T.S. Srivatsan (CRC Press, Taylor & Francis Group, 2007) pp. 437–473.
J.H. Schneibel, Intermetallics, 11, 625 (2003).
J.H. Schneibel, P.F. Tortorelli, R.O. Ritchie and J.J. Kruzic, Metall. Mater. Trans., 36A, 525 (2005).
H. Choe, J.H. Schneibel, and R.O. Ritchie, Metall. Mater. Trans., 34A, 225(2003).
K. Yoshimi, M.H. Yoo, A.A. Wereszczak, S.M. Borowicz, E.P. George and R.H. Zee, Scripta Mater., 45, 1321 (2001).
M. Krüger, S. Franz, H. Saage, M. Heilmaier, J.H. Schneibel, P. Jéhanno, M. Böning and H. Kestler, Intermetallics, 16, 933 (2008).
P. Jéhanno, M. Heilmaier, H. Saage, M. Böning, H. Kestler, J. Freudenberger and S. Drawin, Mater Sci Eng A, 463, 216 (2007).
D. Sturm, M. Heilmaier, J.H. Schneibel, P. Jehanno, B. Skrotzki and H. Saage, Mater Sci Eng A, 463, 107 (2007).
A.P. Alur, N. Chollacoop, and K.S. Kumar, Acta Mater, 55, 961 (2007).
M. Heilmaier, M. Krüger, H. Saage, Mater. Sci. Forum, 633–634: 549 (2010).
H. Saage, M. Krüger, D. Sturm, M. Heilmaier, J.H. Schneibel, E. George, L. Heatherly, Ch. Somsen, G. Eggeler, Y. Yang, Acta Mater., 57, 3895 (2009).
P. Jain and K.S. Kumar, Acta Mater., 58, 2124 (2010).
M. R. Middlemas, J. K. Cochran, P. Jain, K. S. Kumar, “Strength and Oxidation Resistance of Mo-Si-B Alloys Produced by Reaction Synthesis”, Proceedings, Refractory Metals 2010, (TMS 2010), pp 859–866.
R. Sakidja, J. Myers, S. Kim and J.H. Perepezko, Int. J. Ref. Met. Hard Mater., 18, 193 (2000).
A.P. Alur, N. Chollacoop, and K.S. Kumar, Acta Mater., 52, 5571 (2004).
K. Ito, K. Ihara, K. Tanaka, M. Fujikura and M. Yamaguchi, Intermetallics, 9, 591 (2001).
D.P. Mason and D.C.Van Aken, Acta Metall. Mater., 43, 1201 (1995).
M.K. Meyers, M.J. Kramer and M. Akinc, Intermetallics, 4, 273 (1996).
T. Hayashi, K. Ito K. Ihara M. Fujikura, and M. Yamaguchi, Intermetallics, 12, 699 (2004).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Alur, A.P., Sakidja, R., Wang, P. et al. Deformation Behavior of a Quaternary Mo-Nb-Si-B Alloy. MRS Online Proceedings Library 1295, 355–360 (2011). https://doi.org/10.1557/opl.2011.164
Published:
Issue Date:
DOI: https://doi.org/10.1557/opl.2011.164