Abstract
The main concept currently in use in wind energy involves horizontal-axis wind turbines with blades of fiber composite materials. This turbine concept is expected to remain as the major provider of wind power in the foreseeable future. However, turbine sizes are increasing, and installation offshore means that wind turbines will be exposed to more demanding environmental conditions. Many challenges are posed by the use of fiber composites in increasingly large blades and increasingly hostile environments. Among these are achieving adequate stiffness to prevent excessive blade deflection, preventing buckling failure, ensuring adequate fatigue life under variable wind loading combined with gravitational loading, and minimizing the occurrence and consequences of production defects. A major challenge is to develop cost-effective ways to ensure that production defects do not cause unacceptable reductions in equipment strength and lifetime, given that inspection of large wind power structures is often problematic.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Wallenius Wilhelmsen Logistics, “E/S Orcelle—Environmentally Sound Ship,” (Wallenius Wilhelmsen Logistics; www.walleniusmarine.com/qse.jsp?art_id=120) (accessed January 2008).
Danish Wind Industry Association, “Wind map of Western Europe,” (Danish Wind Industry Association; www.windpower.org/en/tour/wres/euromap.htm) (accessed January 2008).
U.S. Department of Energy, Energy Efficiency and Renewable Energy, “Wind Resource Maps,” (USDOE, EERE; www.eere.energy.gov/windandhydro/windpoweringamerica/wind_maps.asp) (accessed January 2008).
U.S. Department of Energy, Renewable Resource Data Center, “Wind Energy Resource Atlas of the United States,” (USDOE, RRDC; http://rredc.nrel.gov/wind/pubs/atlas/maps.html) (accessed January 2008).
C.L. Archer, M.Z. Jacobson, J. Geophys. Res. 110, D12110 (2005).
International Wind Energy Development—World Market Update 2006 (BTM Consult ApS, March 2007).
Global Wind Energy Council, “Global Wind 2006 Report” (GWEC, 2006; www.gwec.net/fileadmin/documents/Publications/gwec-2006_final_01.pdf) (accessed January 2008).
DONG Energy Web site; www.hornsrev.dk/Engelsk/default_ie.htm (accessed January 2008).
ELSAMPROJEKT A/S, “Horns Rev. Offshore Wind Farm—Environmental Impact Assessment—Summary of EIA Report” (ELSAMPROJEKT A/S, Fredericia, Denmark, May 2000; www.hornsrev.dk/Engelsk/Miljoeforhold/pdf/Resume_eng.pdf) (accessed January 2008).
Vestas Wind Systems Web site; http://www.vestas.com/en/about-vestas/sustainability/wind-turbines-and-the-environment (accessed January 2008).
Vestas Wind Systems, “Life Cycle Assessment of Offshore and Onshore Sited Wind Power Plants Based on Vestas V90-3.0 MW Turbines” (Vestas Wind Systems, Randers. Denmark, Ed. 2, July 2006; http://www.vestas.com/Admin/Public/Download.aspx?File=/Files/Flier/EN/Sustainability/LCA/LCAV90_juni_2006.pdf (accessed January 2008).
Vestas Wind Systems, Environmental Impact of Wind Turbines: Energy Balances, http://www.vestas.com/Admin/Public/Download.aspx?File=/Files/Filer/ EN/Sustainability/LCA/LCA_V80_2004_UK.pdf (accessed January 2008).
R.A. Crawford, “Life-Cycle Energy Analysis of Wind Turbines—An Assessment of the Effect of Size on Energy Yield,” in Energy and Sustainability, C.A. Brebbia and V. Popov, Eds., Transactions of the Wessex Institute, Ecology and the Environment (WIT Press, Wessex, UK, 2007); Vol. 105, p. 155.
American Wind Energy Association, Comparative Cost of Wind and Other Energy Sources (American Wind Energy Association, Washington, DC, 2001; www.awea.org); (accessed January 2008).
E. Eggleston, AWEA staff, “What are Vertical-Axis Wind Turbines (VAWTs)?” (American Wind Energy Association, Washington, DC; www.awea.org/faq/vawt.html) (accessed January 2008).
Kite Gen Web site; www.kitegen.com (accessed January 2008).
International Electrotechnical Commission, IEC 61400-1, Wind Turbines— Part 1, Design Requirements, ed. 3 (IEC, Geneva, Switzerland, 2005).
International Electrotechnical Commission, IEC 61400-13, Wind Turbine Generator Systems—Part: 13, Measurement of Mechanical Loads (IEC, Geneva, Switzerland, 2001).
International Electrotechnical Commission, IEC 61400-23, Technical Specification, Wind Turbine Generator Systems—Part: 23, Full-Scale Structural Testing of Rotor Blades (IEC, Geneva, Switzerland, 2001).
International Electrotechnical Commission, IEC WT 01, IEC system for Conformity Testing and Certification of Wind Turbines, Rules and Procedures (IEC, Geneva, Switzerland, 2001).
Det Norske Veritas, Offshore Standard DNV-OS-J101 Design of Offshore Wind Turbine Structures (Det Norske Veritas, Høvik, Norway, 2004).
Det Norske Veritas, Offshore Standard DNV-OS-J102 Design and Manufacture of Wind Turbine Blades, Offshore and Onshore Wind Turbines (Det Norske Veritas, Høvik, Norway, 2006).
Det Norske Veritas, Risø National Laboratory, Guidelines for Design of Wind Turbines (Det Norske Veritas and Risø National Laboratory, Copenhagen, Denmark, 2002).
Guideline for the Certification of Wind Turbines (Germanischer Lloyd, Hamburg, Germany, 2003, with Supplement, 2004).
Guideline for the Certification of Offshore Wind Turbines (Germanischer Lloyd, Hamburg, Germany, 2005).
C. Skamris, Ed., B. Vestergaard, J. Wedel-Heinen, K.M. Halling, O. Sønderby, J.J. Kristensen, B. Pedersen, P. Brøndsted, C.L. Thomsen, E. Bjerregaard, Type Approval Scheme for Wind Turbines. Recommendation for Design Documentation and Test of Wind Tturbine Blades (Danish Energy Agency, Copenhagen, Denmark, 2002).
R. Nijssen, doctoral thesis (KC-WMC and Faculty of Aerospace Engineering, Delft University, Delft, The Netherlands, 2006).
B.F. Sørensen, E. Jørgensen, C.P. Debel, F.M. Jensen, H.M. Jensen, T.K. Jacobsen, K. Halling, “Improved Design of Large Wind Turbine Blade of Fiber Composites Based on Studies of Scale Effects (Phase 1)—Summary Report,” (Report Risø-R-1390(EN), Risø National Laboratory, Roskilde, Denmark, 2004).
P. Brøndsted, H. Lilholt, A.A. Lystrup, Ann. Rev. Mater. Res. 35, 505 (2005).
H. Lilholt, B. Madsen, T.L. Andersen, L.P. Mikkelsen, A. Thygesen, Eds., Proc. 27th Risø Conference on Materials Science, Polymer composite materials for wind power turbines (Risø National Laboratory, Roskilde, Denmark, 4–7 September 2006).
J. Wedel-Heinen, J.K. Tadich, C. Brokopf, L.G.J. Janssen, A.M. van Wingerde, D.R.V. van Delft, C.W. Kensche, T.P. Philippidis, P. Brøndsted, A. G.Dutton, R.P.L. Nijssen, Implementation of OPTIMAT in Technical Standards, OB_TG6_R002 rev. 8, ENK6-CT-2001-00552 PROJECT N°: NNE5-2001-00174, OPTIMAT BLADES (2006).
J. Wedel-Heinen, J.K. Tadich, Proc. 27th Risø Conference on Materials Science, Polymer Composite Materials for Wind Power Turbines, 115 (Risø National Laboratory, Roskilde, Denmark, 2006).
B.F. Sørensen, P. Kirkegaard, Eng. Fract. Mech. 73, 2642 (2006).
C. Lundsgaard-Larsen, B.F. Sørensen, C. Berggreen, R.C. Østergaard, Proc. 27th Risø Conference on Materials Science, Polymer Composite Materials for Wind Power Turbines, (Risø National Laboratory, Roskilde, Denmark, 2006) p.375.
B.F. Sørensen, K. Branner, H. Stang, H.M. Jensen, E. Lund, T.K. Jacobsen, K.M. Halling, “Improved Design of Large Wind Turbine Blades of Fiber Composites (Phase 2)—Summary Report” (Report Risø-R-1526(EN), Risø National Laboratory, Roskilde, Denmark, 2005).
E.R. Jørgensen, K.K. Borum, M. McGugan, C.L. Thomsen, F.M. Jensen, C P. Debel, B.F. Sørensen, “Full Scale Testing of Wind Turbine Blade to Failure—Flapwise Loading” (Report Risø-R-1392(EN), Risø National Laboratory, Roskilde, Denmark, 2004).
C.W. Kensche, Ed., “Fatigue of Materials and Components for Wind Turbine Rotor Blades” (Report EUR 16684, European Commission, Luxembourg, 1996).
R.M. Mayer, Ed., Design of Composite Structures against Fatigue (Mechanical Engineering Publications Ltd., Suffolk, UK, 1996).
L.G.J. Janssen, A.M. van Wingerde, C.W. Kensche, T.P. Philippidis, P. Brøndsted, A.G. Dutton, R.P.L. Nijssen, O. Krause, “Reliable Optimal Use of Materials for Wind Turbine Rotor Blades. Final Report (OPTIMAT BLADES)” (Report ECN-C-06-023, Office for Official Publications of the European Communities, Luxembourg, 2006).
B.J. de Smet, P.W. Bach, Database FACT: Fatigue of Composites for Wind Turbines. 3rd IEA Symp. Wind Turbine Fatigue (ECN, Petten, The Netherlands, 1994).
Delft University of Technology, The Energy Research Centre of the Netherlands, “Optidat Database,” (TUD, ECN; www.kc-wmc.nl/optimatblades_optidat.php) (accessed January 2008).
J.F. Mandell, D.D. Samborsky, “DOE/MSU Composite Materials Fatigue Database. Test Methods, Materials, and Analysis” (Report SAND97-3002, UC-1210, Sandia National Laboratory, Albuquerque, NM, 1997).
DOE, MSU, “DOE/MSU Composite Material Fatigue Database March 2007 Update (DOE, MSU; www.coe.montana.edu/composites/documents/MarchError! Hyperlink reference not valid.) (accessed January 2008).
European Union, UpWind Project Web site; www.upwind.eu (accessed January 2008).
L. Mishnaevsky, Jr., P. Brøndsted, Proc. 27th Risø Conference on Materials Science, Polymer Composite Materials for Wind Power Turbines, 239 (Risø National Laboratory, Roskilde, Denmark, 2007).
L. Mishnaevsky, Jr., P. Brøndsted, Cyclic Loading Frequency Effect on the Damage Growth in the Low-Frequency Range. In Proceedings 239 (2006).
B.T. Åström, Manufacturing of Polymer Composites (Chapman and Hall, London, 1997).
B. Hayman, C. Berggreen, N. Tsouvalis, in Proceedings of MARSTRUCT 2007, The 1st International Conference on Marine Structures, Glasgow, United Kingdom, 12–14 March 2007 (Taylor & Francis 2007). pp. 435–449.
G.J. Short, F.J. Guild, M.J Pavier, Compos. Struct. 58 (2), 249 (2002).
S.F. Hwang, S.M. Huang, Compos. Struct. 68, 157 (2005).
C. Berggreen, PhD degree thesis, Department of Mechanical Engineering, Technical University of Denmark, Lyngby, Denmark (2004).
C. Berggreen, B.C. Simonsen, J. Sandwich Struct. Mater. 11 (7), 483 (2005).
C. Berggreen, B.C. Simonsen, K.K. Borum, J. Compos. Mater. 41 (4), 493 (2007).
B. Hayman, C. Berggreen, R. Pettersson, J. Sandwich Struct. Mater. 9, (4), 377 (2007).
C. Berggreen, C. Jensen, B. Hayman, in Proceedings of MARSTRUCT 2007, The 1st International Conference on Marine Structures, Glasgow, United Kingdom, 12–14 March 2007 (Taylor & Francis 2007) pp. 413–420.
B. Budiansky, Comput. Struct. 16 (1), 3 (1983).
C. Soutis, P.T. Curtis, N.A. Fleck, Proc. R. Soc. London A 440, 241 (1993).
K. Vedeld, MSc degree thesis, Department of Mathematics, University of Oslo, Oslo, Norway (2007).
B. Hayman, J. Sandwich Struct. Mater. 9 (6), 571 (2007).
Federal Aviation Authority (FAA). Federal Aviation Regulations Part 23 Airworthiness standards: Normal, utility, acrobatic and commuter category airplanes. Sections 23.571, 23.572, and 23.573.
B. Hayman, in Theory and Applications of Sandwich Structures, R.A. Shenoi, A.S. Groves, Y.D.S. Rajapakse, Eds. (University of Southampton, Southampton, UK, 2005) p. 351.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hayman, B., Wedel-Heinen, J. & Brøndsted, P. Materials Challenges in Present and Future Wind Energy. MRS Bulletin 33, 343–353 (2008). https://doi.org/10.1557/mrs2008.70
Published:
Issue Date:
DOI: https://doi.org/10.1557/mrs2008.70