References
H. Jones, Rep. Prog. Phys. 36 (1973) p. 1425.
G.X. Wang and E.F. Matthys, Int.J. Rapid Solidification 6 (1991) p. 297.
T.W. Clyne, Metall. Trans. B 15 (1994) p. 369.
T.W. Clyne and S.C. Gill, J. Thermal Spray Technol 5 (1996) p. 401.
S. Kuroda, in Proc. 15th Int. Thermal Spray Conf., edited by C. Coddet (ASM International, Materials Park, OH, 1998) p. 539.
J.M. Houben, PhD thesis, Technishe Universiteit Eindhoven, 1988.
R.C. Dykhuisen, J. Thermal Spray Technol. 3 (1994) p. 351.
P. Fauchais, M. Vardelle, A. Vardelle, and L. Bianchi, in Advances in Inorganic Films and Coatings, edited by P. Vincenzini (Groupe Editorio- rale Faenza Editrici, Faenze, Italy, 1995) p. 83.
X. Jiang, J. Matejicek, and S. Sampath, Mater. Sci. Eng, A 272 (1999) p. 189.
X. Jiang, J. Matejicek, A. Kulkarni, H. Herman, S. Sampath, D. Gilmore, and R. Neiser, in Thermal Spray: Surface Engineering via Applied Research (ASM International, Materials Park, OH 2000) p. 157.
DPV-2000, Tecnar Automation Ltee, St Hubert, Quebec, Canada.
Spraywatch, Oseir Ltd., Tampere, Finland.
C. Moreau, P. Cielo, M. Lamontagne, S. Dallaire, and M. Vardelle, Meas. Sci. Technol. 1 (1990) p. 807.
C. Moreau, P. Gougeon, and M. Lamontagne, J. Thermal Spray Technol. 4 (1995) p. 25.
P. Gougeon and C. Moreau, in Thermal Spray: A United Forum for Scientific and Technological Advances, edited by C.C. Berndt (ASM International, Materials Park, OH, 1997) p. 619.
M. Vardelle, A. Vardelle, P. Fauchais, and C. Moreau, Meas. Sci. Technol. 5 (1994) p. 205.
A.C. Leger, M. Vardelle, A. Vardelle, P. Fauchais, S. Sampath, C.C. Berndt, and H. Herman, in Thermal Spray: Practical Solutions for Engineering Problems, edited by C.C. Berndt (ASM International, Materials Park, OH, 1996) p. 623.
C. Escure, M. Vardelle, and P. Fauchais, in Proc. Int. Thermal Spray Conf, May 2000, Montreal, in press.
A. Haddadi, PhD thesis, University of Limoges, France, 1998 (in French).
M. Bertagnoli, M. Marchese, and G. Jaccuci, J. Thermal Spray Technol. 4 (1995) p. 41.
O. Knotek and R. Elsing, Surf. Coat. Technol. 32 (1987) p. 261.
H. Fukanuma, J. Thermal Spray Technol. 3 (1994) p. 33.
M.F. Smith, R.A. Neiser, and R.C. Dykhuisen, in Thermal Spray: Industrial Applications, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1994) p. 603.
J. Ilavsky A.J. Allen, G.G. Long, and S. Krueger, J. Am. Ceram. Soc. 80 (1997) p. 733.
M.P. Kanouf, R.A. Neiser, and T.J. Roemer, J. Thermal Spray Technol. 7 (1998) p. 219.
J. Madejski, Int. ]. Heat Mass Transfer 26 (1983) p. 1095.
R. Fiedler and J. Naber, in Proc. Combustion Institute Spring Technical Meeting on Combustion Fundamentals and Applications (1989) p. 269.
T. Bennett and D. Poulikakos, J. Mater. Sci. 28 (1993) p. 961.
G. Trapaga and J. Szekely Metal. Trans. B 22 (1991) p. 901.
H. Liu, E.J. Lavernia, and R.H. Rangel, J. Phys. D: Appl. Phys. 26 (1993) p. 1900.
M. Pasendideh-Fard and J. Mostaghimi, in Proc. 7th Natl. Thermal Spray Conf., edited by C.C. Berndt (ASM International, Materials, Park, OH, 1994) p. 405.
M. Bertagnoli, M. Marchese, G. Jaccuci, I. Doltsinis, and S. Noelting, J. Comp. Phys. 133 (1997) p. 205.
G. Montavon, Z.G. Feng, C. Coddet, Z.Q. Feng, and M. Domaszewski, in Thermal Spray: A United Forum for Scientific and Technological Advances, edited by C.C. Berndt (ASM International, Materials Park, OH, 1997) p. 627.
M. Bussmann, S.D. Aziz, S. Chandra, and J. Mostaghimi, in Thermal Spray: Meeting the Challenges of the 21st Century, edited by C. Coddet (ASM International, Materials Park, OH, 1998) p. 413.
J. Mostaghimi (private communication).
A. Vardelle, M. Vardelle, P. Fauchais, and D. Gobin, NATO Series E: Applied Science 282 (1995) p. 95.
C. Robert, A. Vardelle, G.X. Wang, and S. Sampath, in Thermal Spray: Meeting the Challenges of the 21st Century, edited by C. Coddet (ASM International, Materials Park, OH, 1998) p. 407.
M. Vardelle, A. Vardelle, A.C. Leger, and P. Fauchais, J. Thermal Spray Technol. 4 (1995) p. 50.
A. Vardelle, N.J. Themelis, M. Vardelle, and P. Fauchais, High Temp. Mater. Proc. 3 (1997) p. 295.
M. Fukumoto, Y. Huang, and M. Ohwatari, in Thermal Spray: Meeting the Challenges of the 21st Century, edited by C. Coddet (ASM International, Materials Park, OH, 1998) p. 401.
C. Li, J.L. Li, W.B. Wang, and S. Sampath, in Thermal Spray: Meeting the Challenges of the 21st Century, edited by C. Coddet (ASM International, Materials Park, OH, 1998) p. 473.
X. Jiang, Y. Wan, H. Herman, and S. Sampath, “Fragmentation of Impinging Molten ZrO2 Droplets on Substrate During Thermal Spray,” submitted for publication, 1999.
Y. Huang, M. Ohwatari, and M. Fukumoto, in Proc. 6th Int. Symp. of the Japanese Welding Society (1996) p. 731.
S. Kuroda, T. Dendo, and S. Kitahara, J. Thermal Spray Technol. 4 (1995) p. 75.
Rights and permissions
About this article
Cite this article
Vardelle, A., Moreau, C. & Fauchais, P. The Dynamics of Deposit Formation in Thermal-Spray Processes. MRS Bulletin 25, 32–37 (2000). https://doi.org/10.1557/mrs2000.121
Published:
Issue Date:
DOI: https://doi.org/10.1557/mrs2000.121