References
A.P. Alkimov, V.F. Kosarev, and A.N. Papyrin, Sov. Phys. Dokl. 35 (12) (1990) p. 1047.
M.F. Smith, J.E. Brockmann, R.C. Dykhuizen, D.L. Gilmore, RA. Neiser, and T.J. Roemer, in Solid Freeform and Additive Fabrication, edited by D. Dimos, S.C. Danforth, and M.J. Cima (Mater. Res. Soc. Symp. Proc. 542, Warrendale, PA, 1998) p. 65.
R.C. Dykhuizen and M.F. Smith, J. Thermal Spray Technol 7 (1998) p. 205.
D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Smith, J. Thermal Spray Technol. 8 (1999) p. 576.
R.L. Williamson, J.R. Fincke, and C.H. Chang, “A Computational Examination of the Sources of Statistical Variance in Particle Parameters During Thermal Plasma Spraying,” Plasma Chem. Plasma Proc. 20 (3) (2000) in press.
E. Pfender and Y. Lee, Plasma Chem. Plasma Proc. 5 (1985) p. 211.
X. Chen and E. Pfender, Plasma Chem. Plasma Proc. 3 (1983) p. 97.
X. Chen and E. Pfender, Plasma Chem. Plasma Proc. 3 (1983) p. 351.
E. Pfender and Y.C. Lee, Plasma Chem. Plasma Proc. 5 (3) (1985) p. 211.
Y. Wan, V. Prasad, G.-X. Wang, S. Sampath, and J. Fincke, ASME J. Heat Transfer 121 (1999) p. 691.
M. Boulos, P. Fauchais, A. Vardelle, and E. Pfender, in Plasma Spraying, edited by R. Suryanarayanan (World Scientific, Singapore, 1993) p. 3.
Y. Wan, J. Fincke, S. Sampath, and V. Prasad, in 14th Int. Symp. on Plasma Chemistry edited by M. Hrabovsky, M. Konrad, and V. Kopecky (Institute of Plasma Physics, Prague, 1999) p. 1983.
J. Fincke, W. Swank, and D. Haggard, in Transport Phenomena in Materials Processing and Manufacturing, edited by M.K. Alam, C.P Grigoropoulous, Y. Joshi, M.V. Karwe, A.S. Lavine, T.J. Moon, and R.N. Smith, ASME HTD, Vol. 280 (The American Society of Mechanical Engineers, New York, 1994) p. 121.
C.H. Chang and J.D. Ramshaw, Plasma Chem. Plasma Proc. 13 (1993) p. 189.
C.H. Chang and J.D. Ramshaw, Plasma Chem. Plasma Proc. (Suppl.) 16 (1996) p. 5S.
G.D. Power, T.J. Barber, and L.M. Chiappetta, in 28th Joint Propulsion Conf, Nashville, TN, 1993 (American Institute of Aeronautics and Astronautics, Washington, D.C.), AIAA Paper No. 92-3598.
E.B. Smith, G.D. Power, T.J. Barber, and L.M. Chiappetta, in Thermal Spray: International Advances in Coatings Technology, edited by C.C. Berndt (ASM International, Materials Park, OH, 1992) p. 805.
C.H. Chang and R.L. Moore, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1995) p. 207.
X. Yang, S. Eidelman, and I. Lottati, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1995) p. 213.
N. Sinha, B.J. York, A. Hosangadi, and S.M. Dash, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1995) p. 199.
W.L. Oberkampf and M. Talpallikar, J. Thermal Spray Technol. 5 (1996) pp. 53 and 62.
B. Hassan, A.R. Lopez, and W.L. Oberkampf, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1995) p. 193.
B. Hassan, W.L. Oberkampf, R.A. Neiser, A.R. Lopez, and T.J. Roemer, in 27th Fluid Dynamic Conf, New Orleans, LA, 1996 (American Institute of Aeronautics and Astronautics, Washington, D.C.), AIAA Paper No. 96-1939.
S. Gordon and B.J. McBride, Computer Program for Calculation of Complex Chemical Equilibrium Compositions, Rocket Performance, Incident and Reflected Shocks, and Chapman Jouguet Detonations, NASA SP-273, Interim Revision, March 1976 (new version 1989) (NASA Lewis Research Center, Cleveland, OH).
A.R. Lopez, B. Hassan, W.L. Oberkampf, R.A. Neiser, and T.J. Roemer, J. Thermal Spray Technol. 7 (1998) p. 374.
J.R. Fincke, D.C. Haggard, and W.D. Swank, “Particle Temperature Measurement in the Thermal Spray Process,” J. Thermal Spray Technol. (2000) in press.
J.R. Fincke, W.D. Swank, and C.L. Jeffery IEEE Trans. Plasma Sci. 18 (1990) p. 948.
J.R. Fincke, W.D. Swank, C.L. Jeffery, and C.A. Mancuso, Meas. Sci. Technol. 4 (1993) p. 559.
C. Moreau, P. Gougeon, M. Lamontagne, V. Lacasse, G. Vaudreuil, and P. Cielo, in Thermal Spray Industrial Applications, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1994) p. 431.
C. Moreau, P. Gougeon, A. Burgess, and D. Ross, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1995) p. 141.
A. Vardelle, J. Baronnet, M. Vardelle, and P. Fauchais, IEEE Trans. Plasma Sci. 8 (1980) p. 418.
M.F. Smith, T.J. O’Hern, J.E. Brockmann, RA. Neiser, and T.J. Roemer, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM International, Materials Park, OH, 1995) p. 105.
G. Bourque, M. Lamontagne, and C. Moreau, in Thermal Spray Surface Engineering via Applied Research, edited by C.C. Berndt (ASM Interna tional, Materials Park, OH, 2000) p. 45.
H. Hantzsche, in 7th Int. Metal Spraying Conf. (Edison Welding Institute, London, 1973) p. 1.
X. Xu, G. Chen, and Y. Shen, in 1st Plasma- Technik-Symp., edited by H. Eschnauer, P. Huber, A. Nicoll, and S. Sandmeier (Plasma- Technik, Lucerne, 1988) p. 99.
S. Kuroda, T. Fukushima, S. Kitahara, and H. Fujimori, in 12th Int. Conf. of Thermal Spraying, edited by L.A. Bucklow (The Welding Institute, Cambridge, UK, 1989) p. 145.
W.D. Swank, J.R. Fincke, and D.C. Haggard, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM Interna tional, Materials Park, OH, 1995) p. 111.
J.R. Fincke, W.D. Swank, and D.C. Haggard, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM Interna tional, Materials Park, OH, 1995) p. 117.
J.R. Fincke, W.D. Swank, and D.C. Haggard, in Thermal Spray Science and Technology, edited by C.C. Berndt and S. Sampath (ASM Interna tional, Materials Park, OH, 1995) p. 123.
C. Moreau, in Proc. 15th Int. Thermal Spray Conf, edited by C. Coddet (ASM International, Materials Park, OH, 1998) p. 1681.
B. Kruszewska and J. Lesinski, Rev. Phys. Appl. 12 (1977) p. 1209.
M. Vardelle, A. Vardelle, P. Fauchais, and M.I. Boulos, J. AICE 29 (1983) p. 236.
J. Mihsin, M. Vardelle, J. Lesinski, and P. Fauchais, J. Phys. E: Sci. Instrum. 20 (1987) p. 620.
J. Fincke, C.L. Jeffery, and S.B. Englert, J. Phys. E: Sci. Instrum. 21 (1988) p. 367.
D.A. Tichenor, R.E. Mitchell, K.R. Hencken, and S. Niksa, Simultaneous In Situ Measurement of the Size, Temperature and Velocity of Particles in a Combustion Environment, Report No. SAND 84-8628 (Sandia National Laboratories, Albuquerque, NM, 1984).
T. Sakuta and M.I. Boulos, in Proc. 8th Int. on Plasma Chemistry, edited by K. Akashi (University of Tokyo, Japan, 1987) p. 371.
T. Sakuta and M.I. Boulos, Rev. Sci. Instrum. 59 (1988) p. 285.
Rights and permissions
About this article
Cite this article
Fincke, J.R., Neiser, R.A. Advanced Diagnostics and Modeling of Spray Processes. MRS Bulletin 25, 26–31 (2000). https://doi.org/10.1557/mrs2000.120
Published:
Issue Date:
DOI: https://doi.org/10.1557/mrs2000.120