Skip to main content

Carbon footprint of bioplastics using biocarbon content analysis and life-cycle assessment

Abstract

Bio-based plastics, in which the fossil carbon is replaced by bio/renewable-based carbon, offer the intrinsic value proposition of a reduced carbon footprint and are in complete harmony with the rates and time scale of the biological carbon cycle. Identification and quantification of bio-based content is based on the radioactive C-14 signature associated with (new) biocarbon. Using experimentally determined biocarbon content values, one can calculate the intrinsic CO2 emissions reduction achieved by substituting petrocarbon with biocarbon—the material carbon footprint value proposition. The process carbon footprint arising from the conversion of feedstock to final product is computed using life-cycle assessment methodology. Biodegradability in conjunction with selected disposal systems such as composting and anaerobic digestion offers an end-of-life solution to completely remove the plastic substrate from the environment. Not all bio-based polymer materials are biodegradable, and not all biodegradable polymers are bio-based. Most importantly, complete biodegradability (complete utilization of the polymer by the microorganisms present in the disposal environment) is necessary as per ASTM and ISO standards, otherwise there could be serious health and environmental consequences.

This is a preview of subscription content, access via your institution.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6

References

  1. R. Narayan, American Chemical Society Symposium Series, 939 (2006), C. 18, pp. 282.

    CAS  Article  Google Scholar 

  2. R. Narayan, in Renewable Resources and Renewable Energy, M. Graziani, P. Fornasiero, Eds. (CRC Press, Taylor & Francis Group, 2006), C. 1.

  3. ISO 14040 (Principles & Framework) and 14044 (Requirements & Guidelines) standards, International Standards Organization; www.iso.ch.

  4. Association of Plastics Manufacturers in Europe, Brussels, Belgium; http://www.plasticseurope.org/.

  5. E.T.H. Vink, Polym. Degrad. Stab. 80, 403 (2003).

    CAS  Article  Google Scholar 

  6. E.T.H. Vink, D.A. Glassner, J.J. Kolstad, R.J. Wooley, R.P. O’Connor, J. Ind. Biotechnol. 3 (1), 58 (2007).

    CAS  Article  Google Scholar 

  7. ASTM International, Annual Book of Standards, Standards D 6866; D6400, D6868, D7021 (ASTM International, Philadelphia, PA, 2010), Vol. 8.03; www.astm.org.

  8. U.S. Department of Agriculture Biobased Products Federal Procurement Program; www.biopreferred.gov.

  9. Taking Biobased from Promise to Market (Ad-hoc Advisory Group for Bio-based Products in the framework of the European Commission’s Lead Market Initiative, November 2009); http://ec.europa.eu/enterprise/sectors/biotechnology/files/docs/bio_based_from_promise_to_market_en.pdf.

  10. Japan BioPlastics Association; www.jbpaweb.net/english/e-jbpa.htm.

  11. R. Narayan, in Science and Engineering of Composting: Design, Environmental, Microbiological and Utilization Aspects, H.A.J. Hoitink, H.M. Keener, Eds. (Renaissance Publications, OH, 2003), pp. 339.

  12. P. Galgali, A.J. Varma, U.S. Puntambekar, D.V. Gokhale, Chem. Commun. 23, 2884 (2002).

    Article  Google Scholar 

  13. G. Scott, in Degradable Polymers: Principles and Applications (Kluwer, NY, 2002), Chapter 3.

  14. T.F.J. Ojeda, E. Dalmolin, M.M.C. Forte, R.J.S. Jacques, F.M. Bento, F.A.O. Camargo, Polym. Degrad. Stab. 94, 965 (2009).

    CAS  Article  Google Scholar 

  15. R.C. Thompson, Y. Olsen, R.P. Mitchell, A. Davis, S.J. Rowland, A.W.G. John, D. McGonigle, A.E. Russell, Science 304, 838 (2004).

    CAS  Article  Google Scholar 

  16. Algalita Marine Research Foundation; www.algalita.org/pelagic_plastic.html.

  17. Y. Mato, T. Isobe, H. Takada, H. Kahnehiro, C. Ohtake, T. Kaminuma, Environ. Sci. Technol. 35, 318 (2001).

    CAS  Article  Google Scholar 

  18. E.L. Teuten, J.M. Saquing, D.R.U. Knappe, M.A. Barlaz, S. Jonsson, A. Björn, S.J. Rowland, R.C. Thompson, T.S. Galloway, R. Yamashita, et al., Philos. Trans. R. Soc. London, Ser. B 364, 2027 (2009).

    CAS  Article  Google Scholar 

  19. Philos. Trans. R. Soc. London, Ser. B 264 (2009).

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ramani Narayan.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Narayan, R. Carbon footprint of bioplastics using biocarbon content analysis and life-cycle assessment. MRS Bulletin 36, 716–721 (2011). https://doi.org/10.1557/mrs.2011.210

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1557/mrs.2011.210