Abstract
Graphene reinforced natural rubber composites are developed to study the improvement in mechanical and tribological properties of natural rubber by the introduction of graphene as reinforcement. Constant strain minimization method has been applied to calculate Young’s and shear modulus of developed structures. A three-layer model containing Fe (Iron) atoms at the top and bottom and polymer matrices in the middle has been constructed to calculate the tribological properties. A shear loading is applied to the top iron nanorod by sliding it to the surface of the polymer matrices for 600 ps with a velocity of 0.01 nm/ps. The results show the increase of 185% in Young’s modulus, 32% in shear modulus and 48% in hardness by reinforcing natural rubber with single-layer graphene oxide sheet, respectively. Also, reduction of 28% and 36% in the friction coefficient and abrasion rate obtained by the introduction of graphene oxide sheet in natural rubber matrix. Also, interaction energy between graphene and natural rubber, the angle, bond and kinetic energy of the polymer and composites has been calculated and discussed.
Similar content being viewed by others
References
S. Stankovich, D.A. Dikin, G.H. Dommett, K.M. Kohlhaas, E.J. Zimney, E.A. Stach, R. Piner, S.T. Nguyen, and R.S. Ruoff, Nature 442 (7100), 282–286 (2006).
J.W. Jiang, J.S. Wang, and B. Li, Physical Review B 80 (11), 113405 (2009).
C. Lee, X. Wei, J.W. Kysar, and J. Hone, Science 321 (5887), 385–388 (2008).
Y. Mao, S. Wen, Y. Chen, F. Zhang, P. Panine, T.W. Chan, L. Zhang, Y. Liang, and L. Liu, Scientific Reports 3, 2508 (2013).
M.A. Rafiee, J. Rafiee, Z. Wang, H. Song, Z.Z. Yu, and N. Koratkar, ACS Nano 3 (12), 3884–3890 (2009).
N. Yan, G. Buonocore, M. Lavorgna, S. Kaciulis, S.K. Balijepalli, Y. Zhan, H. Xia, and L. Ambrosio, Composites Science and Technology 102, 74–81 (2014).
X. Wu, T.F. Lin, Z.H. Tang, B.C. Guo, and G.S. Huang, Express Polymer Letters 9 (8), 672–685 (2015).
X. She, C. He, Z. Peng, and L. Kong, Polymer 55 (26), 6803–6810 (2014).
S. Yaragalla, A.P. Meera, N. Kalarikkal, and S. Thomas, Industrial Crops and Products 74,792–802 (2015).
T. Huang, Y. Xin, T. Li, S. Nutt, C. Su, H. Chen, P. Liu, and Z. Lai, ACS Applied Materials & Interfaces 5 (11), 4878–4891 (2013).
W. Brostow, H.E.H. Lobland, N. Hnatchuk, and J.M. Perez, Nanomaterials 7 (3), 66 (2017).
R. Shah, T. Datashvili, T. Cai, J. Wahrmund, B. Menard, K.P. Menard, W. Brostow and J.M. Perez, Materials Research Innovations 19 (2), 97–106 (2015).
W. Brostow, S. Deshpande, T. Hilbig & R. Simoes, Polymer Bulletin 70 (4), 1457–1464 (2013).
J.R. Rocha, K.Z. Yang, T. Hilbig, W. Brostow & R. Simoes, Journal of Materials Research 28 (21), 3043–3052 (2013)
S. Sharma, R. Chandra, P. Kumar, and N. Kumar, Acta Mechanica Solida Sinica 28, 409–419 (2015).
Q. Lin, L. Qu, Q. Lü, and C. Fang, Polymer Testing 32 (2), 330–337 (2013).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chawla, R. Mechanical and Tribological Properties of Graphene Reinforced Natural Rubber Composites: A Molecular Dynamics Study. MRS Advances 3, 525–530 (2018). https://doi.org/10.1557/adv.2018.178
Published:
Issue Date:
DOI: https://doi.org/10.1557/adv.2018.178