Abstract
The mechanical properties of as-sintered and heat-exposed polycrystalline Mg2Si were investigated. The strength of the as-fabricated specimen depends on the surface flaws. After heat exposure in Ar atmosphere, oxidized products formed, mainly consisting of MgO. The strength increased after the heat exposure, and the surface oxidation product filled the surface cracks. After the surface oxidation products were removed, the strength and TE properties were the same as those of the as-fabricated specimens.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
D. T. Crane and J. W. Lagrandeur, J. Elec. Mater. 39, 2142 (2010).
S. LeBlanc, Sustainable Mater. Technol., 1–2, 26 (2014)
N. Satyala and D. Vashaee, Appl. Phys. Lett. 100, 073107 (2012).
J. de Boor, T. Dasgupta, H. Kolb, C. Compere, K. Kelm, and E. Mueller, Acta Mater. 77, 68 (2014).
Y. Hayatsu, T. Iida, T. Sakamoto, S. Kurosaki, K. Nishio, Y. Kogo, and Y. Takanashi, J. Solid. State Chem. 193, 161 (2012).
D. L. Perry, Handbook of Inorganic Compounds, Second Edition, (CRC Press, 2016) pp. 257
J.-I. Tani, M. Takahashi, and H. Kido, J. Alloys. Compd. 488, 346 (2009).
T. Itoh and A. Tominaga, Mater. Trans. 57, 1088 (2016).
S. H. Park, Y. Kim, and C.-Y. Yoo, Ceram. Int. 42, 10279 (2016).
L. Wang, X. Y. Qin, W. Xiong, and X. G. Zhu, Mater. Sci. Eng. A, 459, 216 (2007).
R. D. Schmidt, X. Fan, E. D. Case, and P. B. Sarac, J. Mater. Sci. 50, 4034 (2015).
M. Ishikawa, T. Nakamura, S. Hirata, T. Iida, K. Nishio, and Y. Kogo, Jpn. J. Appl. Phys. 54, 07JC03 (2015)
B. R. Lawn and E. R. Fuller, J. Mater. Sci. 10, 2016 (1975).
B. R. Lawn, Fracture of Brittle Solids, (Cambridge University press, 1993) pp. 260
V. Milekhine, M. I. Onsøien, J. K. Solberg, and T. Skaland, Intermetallics 10, 743 (2002)
E.-C. Stefanaki, E. Hatzikraniotis, G. Vourlias, K. Chrissafis, G. Kitis, K. M. Paraskevopoulos, and G. S. Polymeris, Metall. Mater. Trans. A 47, 5146 (2016)
K. Takahashi, K. Ando, and W. Nakao, Crack-Healing Ability of Structural Ceramics and Methodology to Guarantee the Reliability of Ceramic Components (InTech, 2011)
T. Sakamoto, T. Iida, S. Kurosaki, K. Yano, H. Taguchi, K. Nishio, and Y. Takanashi, J. Elec. Mater. 40, 629 (2011).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Nakamura, T., Inoue, R., Hasegawa, S. et al. Mechanical Properties and Fracture Behavior of Mg2Si after Heat Exposure. MRS Advances 2, 3291–3297 (2017). https://doi.org/10.1557/adv.2017.441
Published:
Issue Date:
DOI: https://doi.org/10.1557/adv.2017.441