References
D.G. Doran, A.F. Rowcliffe, and F.M. Mann, J. Nucl. Mater. 141–143 (1986) p. 1074.
S. Fetter, E.T. Cheng, and F.M. Mann,, Fusion. Eng. Des. 6 (1988) p. 123.
D.G. Doran, H.L. Heinisch, and F.M. Mann, J. Nucl. Mater. 133–134 (1985) p. 892. See also J.S. Herring, Application of 10CFR61 to Long-Term Fusion Waste Management, Report E.G. & G.-M-36486 (April 8, 1987).
G.J. Butterworth and L. Giancarli, J. Nucl. Mater. 155–157 (1988) p. 575.
S.J. Piet, J. Nucl. Mater. 141–143 (1986) p. 65.
D. Dulieu, K.W. Tupholme, and G.J. Butterworth, J. Nucl. Mater. 141–143 (1986) p. 1097.
E. Ruedl, D. Rickerby, and T. Sasaki, Fusion Tech. 2 (1984) p. 1029.
P. Fenci and H. Scheuer, J. Nucl. Mater. 155–157 (1988) p. 947.
A.H. Bott, F.B. Pickering, and G.J. Butterworth, J. Nucl. Mater. 141–143 (1986) p. 1088.
T. Noda, F. Abe, H. Araki, and M. Okada, J. Nucl. Mater. 141–143 (1986) p. 1102.
M. Tamura, H. Hayakawa, M. Tanimura, A. Hishinuma, and T. Kondo, J. Nucl. Mater. 141–143 (1986) p. 1067.
N.M. Ghoniem, A. Shabaik, and M.Z. Youssef, in Ferritic Alloys for Use in Nuclear Energy Technologies, edited by J.W. Davis and D.J. Michel (TMS-AIME, Warrendale, PA, 1984) p. 201.
H.R. Bragef, F.A. Garner, D.S. Gelles, and M.L. Hamilton, J. Nucl. Mater. 133 & 134 (1985) p. 907.
R.L. Klueh, D.S. Gelles, and T.A. Lechtenberg, J. Nucl. Mater. 141–143 (1986) p. 1081.
R.L. Klueh, Met. Trans. 20A (1989) p. 463.
F. Abe, H. Araki, T. Noda, and M. Okada, J. Nucl. Mater. 155–157 (1988) p. 656.
D.S. Gelles, “Effects of Irradiation on Low Activation Ferritic Alloys, A Review,” in Reduced Activation Materials for Fusion Reactors, ASTM STP-1047 (Am. Soc. for Testing and Mater., Philadelphia, PA, to be published).
R.L. Klueh and W.R. Corwin, J. Mater. Eng. 11 (1989) p. 135.
M. Tamura, H. Hayakawa, A. Yoshitake, A. Hishinuma, and T. Kondo, J. Nucl. Mater. 155–157 (1988) p. 620.
R.L. Klueh and P.J. Maziasz, “Reduced Activation Austenitic Stainless Steels: The Fe-Mn-Cr-C System,” in Reduced Activation Materials for Fusion Reactors, ASTM STP-1047 (Am. Soc. for Testing and Mater., Philadelphia, PA, to be published).
P.J. Maziasz and R.L. Klueh, “Precipitation Sensitivity to Alloy Composition in Fe-Cr-Mn Austenitic Steels Developed for Reduced Activation for Fusion Applications,” ibid.
F.A. Garner, H.R. Brager, D.S. Gelles, and J.M. McCarthy, J. Nucl. Mater. 148 (1988) p. 294.
F.A. Garner, F. Abe, and T. Noda, J. Nucl. Mater. 155–157 (1988) p. 870.
F.A. Garner and J.M. McCarthy, “An Assessment of Fe-Cr-Mn Austenitic Alloys for Fusion Reactor Service,” in Reduced Activation Materials for Fusion Reactors, ASTM STP-1047 (Am. Soc. for Testing and Mater., Philadelphia, PA, to be published).
J.M. McCarthy and F.A. Garner, J. Nucl. Mater. 155–157 (1987) p. 877.
J.R. Peterson and D.B. Smathers, J. Nucl. Mater. 141–143 (1986) p. 1113.
D.N. Braski, ibid., p. 1125. See also Fusion Reactor Materials, Semiannual Progress Report, DOE/ER-0313/4 (August 1988) p. 168.
D.R. Diercks and B.A. Loomis, J. Nucl. Mater. 141–143 (1986) p. 1117; see also B.A. Loomis, Fusion Reactor Materials, Semiannual Progress Report, DOE/ER0313/6, to be published.
R. Dos Santos, J. Nucl. Mater. 155–157 (1988) p. 589.
S. Ohnuki, H. Takahashi, H. Kinoshita, and R. Nagasaki, ibid., p. 935.
H. Kawanishi and S. Ishino, ibid., p. 940.
H. Takahashi, S. Ohnuki, H. Kinoshita, R. Nagasaki, and K. Abe, ibid., p. 982.
W.J. Phythian, B.L. Eyre, and D.J. Bacon, ibid., p. 982.
B.A. Loomis, B.J. Kestel, B.D. Edwards, and D.L. Smith, Fusion Reactor Materials, Semiannual Progress Report, DOE/ER-0313/5 (May 1989) p. 242.
N.S. Cannon, M.L. Hamilton, A.M. Ermi, D.S. Gelles, and W.L. Hu, ibid., p. 987.
H.R. Thresh, A.G. Hins, and D.L. Smith, ibid., p. 608.
A.M. Ermi, in Alloy Development for Irradiation Performance Report, DOE/ER-0045/13 (Sept. 30, 1984) p. 21.
D.N. Braski, in Influence of Radiation on Material Properties: 13th International Symposium (Part II), ASTM STP 956 (Am. Soc. for Testing and Mater., Philadelphia, PA, 1987) p. 271.
D.L. Smith, H. Matsui, L. Greenwood, and B. Loomis, J. Nucl. Mater. 155–157 (1988) 1359.
B.A. Loomis, B.J. Kestel, S.B. Gerber and G. Ayrault, J. Nucl. Mater. 141–143 (1986) p. 705.
B.A. Loomis, R.H. Lee, D.L. Smith, and J.R. Peterson, J. Nucl. Mater. 155–157 (1988) p. 631.
O.K. Chopra and D.L. Smith, ibid., p. 683.
H.U. Borgstedt, M. Grundmann, J. Konys, and Z. Peric, ibid., p. 690.
Ch. Adelhelm, D. Kempf, and E. Nold, ibid., p. 698.
P. Hubberstey and P.G. Roberts, ibid., p. 694.
Rights and permissions
About this article
Cite this article
Doran, D.G., Klueh, R.L. Reduced Activation Alloy Development for Fusion. MRS Bulletin 14, 45–47 (1989). https://doi.org/10.1557/S0883769400062151
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400062151