References
M.F. Ashby, H.S. Kong, and J. Abulawi, T-MAPS: A Program for Constructing Maps for Surface Heating in Unlubricated Sliding, Version 2.0, (Cambridge University Engineering Department, Cambridge, U.K., 1990).
W.O. Winer and B.-Y. Ting, Development of a Theory of Wear of Ceramics, Oak Ridge National Laboratory Report ORNL/84-7802/1 (1988).
B.-Y. Ting and W.O. Winer, ASME J. Tribol. 111 (1989) p. 315.
T.F.J. Quinn, ASLE Trans. 21 (1978) p. 78.
A. Skopp, M. Woydt, and K.-H. Habig, Tribol. Int. 23 (1990) p. 189.
K. Miyoshi, Surf. Coat. Technol. 36 (1988) p. 487.
A.F. Smith, Wear 96 (1984) p. 301.
M. Woydt and K.-H. Habig, Tribol. Int. 22 (1989) p. 75.
I. Brikby, P. Harrison, and H. Stevens, Ccram. Eng. Sci. Proc. 9 (1988) p. 1431.
K.F. Dufrane and W.A. Glaeser, Int. Conf. on Wear of Materials, edited by K.C. Ludema (ASME, New York, 1987) p. 285.
A. Erdemir, D.E. Busch, R.A. Erck, G.R. Fenske, and R. Lee, STLE Preprint No. 90-TC-1C-1.
A. Erdemir, G.R. Fenske, R.A. Erck, and C.C. Cheng, Lubr. Eng. 46 (1990) p. 23.
A. Erdemir, G.R. Fenske, F.A. Nichols, and R.A. Erck, Tribol. Trans. 33 (1990) p. 511.
V. Aronov and M. Benetatos, ASME Preprint No. 88-Trib-58, 1988.
Materials Data Sheet, Nilcra Ceramics Pty., Ltd., Victoria, Australia.
R.S. Gates, J.P. Yellets, D.E. Deckman, and S.M. Hsu, Selection and Use of Wear Tests for Ceramics, edited by C.S. Yust and R.G. Bayer (ASTM, STP 1010, Philadelphia, 1988) p. 1.
T.E. Fischer and H. Tomizawa, Wear 105 (1985) p. 29.
Metals Handbook, 10th ed., 2 (ASM-International, Metals Park, OH, 1989) p. 699.
Rights and permissions
About this article
Cite this article
Erdemir, A., Nichols, F.A., Fenske, G.R. et al. Sliding Friction and Wear of Ceramics With and Without Soft Metallic Films. MRS Bulletin 16, 49–53 (1991). https://doi.org/10.1557/S0883769400055834
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400055834