References
See, for example, R.A. Blewer, Solid State Technology 11 (1986) p. 117 and Proc. Workshops on Tungsten and Other Adv. Met. for VLSI/ULSI Applications (Materials Research Society, Pittsburgh, 1984-1994).
P.A. Railey, S.S. Peng, L. Fang, Solid State Technology 36 (1993) p. 47.
D. Moy, M. Schadt, C-K. Hu, F. Kaufman, A. Ray, N. Mazzeo, E. Baran, and D.J. Pearson, Proc. VM/C26 (1989).
K. Ishira, T. Yamadai, S. Onishi, K. Mat-suda, and K. Sakiyama, Proc. VMIC 185 (1991).
K. Kajiyana, K. Oyama, K. Tsunenari, T. Kunio, R. Koh, and Y. Haysahi, Proc. VMIC 185 (1991).
Constitution of Binary Alloys (1987).
J. Mayer and S.S. Lau, Electronic Material Science (Macmillan, New York, 1992).
J. Li, PhD dissertaion, Cornell University (1992).
S.Q. Wang, Proc. Adv. Met. for ULSI Applications in 1993 (Materials Research Society, Pittsburgh, 1993) p. 31.
K. Yano, T. Murkami, and N. Nomura, Proc. Adv. Met. for ULSI Applications in 1993 (Materials Research Society, Pittsburgh, 1993) p. 361.
S.E. Schulz, B. Hintze, C. Wurzbacher, W. Grunewald, and T. Gessner, Proc. of the Adv. Met. for ULSI Applications in 1993 (Materials Research Society, Pittsburgh, 1993) p. 465.
G.J. Leusnik, T. G.M. Oosterlaken, G.C.A.M. Jamsen, and S. Radelaar, Proc. Adv. Met. for ULSI Applications in 1993 (Materials Research Society, Pittsburgh, 1993) p. 335.
R.V. Joshi, Int. Conf. on Solid State Dev. and Mat. (Makubari, Japan, 1993) p. 164.
T.D. Sullivan and L.A. Miller, in Materials Reliability in Microelectronics III, edited by K. Rodbell, B. Filter, H. Frost, and P. Ho (Mater. Res. Soc. Symp. Proc. 309, Pittsburgh, 1993).
C. Arena, J. Faguet, R.F. Foster, J.T. Hillman, and D. Srinivas, Proc. Adv. Met. for ULSI Applications in 1993 (Materials Research Society, Pittsburgh, 1993) p. 173.
H. Onoda, M. Kageyama, Y. Tatara, Y. Harada, A. Nakamura, and Y. Fukuda, Proc. Adv. Mel. for ULSI Applications in 1993 (Materials Research Society, Pittsburgh, 1992) p. 19.
R.V. Joshi and S. Brodsky, “Collimated Sputtering for Ti/TiN Liners Using High Aspect Ratio Contacts/Lines,” Appl. Phys. Lett. 61 (19) (1992) p. 2613.
H.S. Rathore, R.G. Fillip, R.A. Wachnik, J.J. Estabil, and T. Kwok, Proc. of the SPIE Meeting on Submicrometer Metallization, vol. 1805 (San Jose, 1992).
T. Kwok, Proc. of the SPIE Meeting on Metallization: Performance and Reliability Issues for VLSI and ULSI, vol. 1595 (San Jose, 1991).
J.J. Estabil, H.S. Rathore, and E.N. Levine, Proc. of the VMIC (Santa Clara, June 11-12, 1991).
R.G. Fillip, G.A. Biery, and M.H. Wood, in Materials Reliability in Microelectronics III, edited by K. Rodbell, B. Filter, H. Frost, and P. Ho (Mater. Res. Soc. Symp. Proc. 309, Pittsburgh, 1993) p. 141.
I. Blech, J. Appl. Phys. 47 (1976) p. 1203; ibid. 448 (1977) p. 473.
K. Gadepally, P.K. Reddy, S. Hiew, R. Merrill, R. Lahri, and M. Biswal, Materials Reliability in Microelectronics III (Mater. Res. Soc. Symp. Proc. 309, Pittsburgh, 1993) p. 161.
M.M.J. Kim, SPIE, vol. 1597, edited by G.S. Gildenblat and G.P. Schwartz (San Jose, 1991) p. 161.
M.B. Small and D.J. Pearson, IBM J. Res. Dev. 34 (1990) p. 858.
J.T. Trattles, A.G. O’Neill, and B.C. Mecrow, Proc. of the VMIC (Santa Clara, June 11-12, 1991).
H. Kahn and C.V. Thompson, “A Statistical Characterization of Electromigration-Induced Open Failures in 2-Level Metal Structures,” in Materials Reliability Issues in Microelectronics (Mater. Res. Soc. Symp. Proc. 225, Pittsburgh, 1991).
Rights and permissions
About this article
Cite this article
Shacham-Diamand, Y. The Reliability of Aluminum/Tungsten Technology for VLSI Applications. MRS Bulletin 20, 78–82 (1995). https://doi.org/10.1557/S0883769400045644
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400045644