References
W.K. Burton, N. Cabrera, and E.C. Frank, Trans. R. Soc. London, Ser. A 243 (1951) p. 299
C. Herring, in Structure and Properties of Solid Surfaces, edited by R. Gomer and C.S. Smith (University of Chicago Press, Chicago, 1953) p. 5.
J.W. Cahn, Acta Metall. 8 (1960) p. 554.
G. Kalonji and J.W. Cahn, J. Phys, (Paris), Coll. 43 (1982) p. C6–25.
For example, R.C. Pond, in Dislocations in Solids, Volume 8, edited by F.R.N. Nabarro (North Holland, Amsterdam. 1989) p. 1.
For example, A.G. Khachaturyan, S.M. Semenovskaya, and J.W. Morris Jr., Acta Metall. 36 (1988) p. 1563.
U. Koster, Mater. Sci. Eng. 5 (1969) p. 174.
G.R. Hugo and B.C. Muddle, Mater. Forum 13 (1989) p. 147.
J. Douin, U. Dahmen, and K.H. Westmacott, Philos. Mag. B 63 (1991) p. 867.
G.R. Hugo and B.C. Muddle, Acta Metall. Mater 38 (1990) p. 351.
Gouthama and Kishore, Proc. Int. Conf. Phase Transformations ’87, edited by G.W. Lorimer (1989); Gouthama, PhD thesis, Indian Institute of Science, 1989.
P. Lours, K.H. Westmacott, and U. Dahmen, in Structure & Properties of Interfaces in Materials, edited by W.A.T. Clark, U. Dahmen, and C.L. Briant (Mater. Res. Soc. Symp. Proc. 238, Pittsburgh, PA, 1992) p. 207.
S. Hinderberger, S.Q. Xiao, K.H. MSA Proc. 53 (1994) in press.
N. Thangaraj, S. Hinderberger, K.H. Westmacott, and U. Dahmen. in Advanced Metallization for ULSI Applications in 1993, edited by D.P. Favreau, Y. Shacham-Diamand, and Y. Horiike (Mater. Res. Soc. Conf. Proc, Pittsburgh, PA, 1994) p. 247.
Rights and permissions
About this article
Cite this article
Dahmen, U. Evolution of Ge Precipitate Morphology in Al. MRS Bulletin 19, 22–25 (1994). https://doi.org/10.1557/S0883769400036708
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400036708