References
R. Smith and R. Novak, J. Powder Metall: Int. 23 (1991) p. 147.
R. Smith and R. Novak, J. Powder Metall: Int. 23 (1991) p. 231.
R. Pober and R. Abbott, Am. Ceram. Soc. Bull. 73 (1994) p. 45.
M. Boulos, J. Thermal Spray Technol. 1 (1992) p. 33.
H.D. Steffens, Z. Babiak, and M. Wewel, IEEE Trans. Plasma Sci. 18 (1989) p. 974.
M. Thorpe, Adv. Mater. Processing 134 (1988) p. 69.
David R. Marantz and Daniel R. Marantz, in Proc. 3rd Natl. Thermal Spray Conf., edited by T.F. Bernecki (ASM International, Materials Park, OH, 1990) p. 113.
E. Sampson and L. Nieder, in Proc. 5th Natl. Thermal Spray Conf., edited by C.C. Berndt and T.F. Bernecki (ASM International, Materials Park, OH, 1993) p. 251.
E. Sampson, in Proc. 5th Natl. Thermal Spray Conf., edited by C.C. Berndt and T.F. Bernecki (ASM International, Materials Park, OH, 1993) p. 257.
X. Wang, J. Heberlein, E. Pfender, and W. Gerberich, in Proc. 8th Natl. Thermal Spray Conf., edited by C.C. Berndt and T.F. Bernecki (ASM International, Materials Park, OH, 1995) p. 31.
J. Heberlein and E. Pfender, Mater. Sci. Forum 140 (1993) p. 477.
N. Ohtake and M. Yoshikawa, J. Electrochem. Soc. 137 (1990) p. 717.
N. Ohtake, M. Yoshikawa, K. Suzuki, and S. Takeuchi, in Applications of Diamond Films and Related Materials, edited by Y. Tzeng, M. Yoshikawa, M. Murakawa, and A. Feldman (Elsevier Science Publishers B.V., 1991) p. 431.
E. Pfender, Q. Han, T. Or, Z. Lu, and J. Heberlein, Diamond Rel. Mater. 1 (1992) p. 127.
T. Yoshida, T. Tani, H. Nishimura, and K. Akashi, J. Appl. Phys. 2 (1983) p. 640.
A. Kumar and R. Roy, J. Mater. Res. 3 (6) (1989) p. 1373.
P. Kong and E. Pfender, in Proc. 2nd Int. Conf. Ceram. Powder Processing Sci. (Berchtesgaden, 1988).
P. Kong and E. Pfender, in Combustion and Plasma Synthesis of High Temperature Materials, edited by Z.A. Munir and J.B. Holt (VCH Publishers, Inc., New York, 1990) p. 420.
P. Kong, T. Or, L. Stachowicz, and E. Pfender, in Better Ceramics Through Chemistry IV, edited by B.J.J Zelinski, C.J. Brinker, D.E. Clark, and D.R. Ulrich (Mater. Res. Soc. Symp. Proc. 180, Pittsburgh, 1990) p. 849.
T. Or, Z. Lu, L. Stachowicz, P. Kong, and E. Pfender, in Plasma Processing and Synthesis of Materials III, edited by D. Apelian and J. Szekely (Mater. Res. Soc. Symp. Proc. 190, Pittsburgh; 1991) p. 83.
H. Zhu, Y. Lau, and E. Pfender, LOOKRF Plasma Synthesis of YBa2Cu7–x Powders Using a Liquid Injection Method, O Talk Summaries, Electronics Division, edited by K.M. Nair, presented at the 91st Annual Meeting of the American Ceramic Society, Indianapolis, 1989.
P. Kong and E. Pfender, LOOKRF Plasma Synthesis of YBa2Cu7–x Powders Using a Liquid Injection Method, O Talk Summaries, Electronics Division, edited by K.M. Nair, presented at the 91st Annual Meeting of the American Ceramic Society, Indianapolis, 1989.
K. Terashima, T. Yoshida, and K. Akashi, in Jpn. Symp. on Plasma Chemistry (1988) p. 157.
T. Ono, M. Kagawa, Y. Syono, M. Ikebe, and Y. Muto, J. Plasma Chem. Plasma Process. 7 (2) (1987) p. 201.
H. Zu, Y. Lau, and E. Pfender, ISPC-9 (International Symposium on Plasma Chemistry, edited by R.D. Agostino, University of Bari, Italy, 1989) p. 1497.
P. Kong and E. Pfender, Non-Oxide Ceramic Engineering, edited by A.W. Weimer and W. Rafaniello (Chapman and Hall, London) in press.
R.W. Siegel, Mater. Sci. Eng. A168 (1993) p. 189.
S. Girshick and C.P. Chiu, J. Plasma Chem. Plasma Process. 9 (1989) p. 355.
N. Rao, S. Girshick, J. Heberlein, P. McMurry, S. Tones, D. Hausen, and B. Micheel, J. Plasma Chem. Plasma Process. 15 (1995) p. 581.
Rights and permissions
About this article
Cite this article
Boulos, M., Pfender, E. Materials Processing With Thermal Plasmas. MRS Bulletin 21, 65–69 (1996). https://doi.org/10.1557/S0883769400035752
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400035752