References
C.C. Furnas, U.S. Bureau of Mines Reports of Investigations No. 2894 (1928).
C.C. Furnas, Ind. Eng. Chem. 23 (1931) p. 1052.
A.H.M. Andreasen, Kolloid Z. 48 (1929) p. 175.
A.H.M. Andreasen, Kolloidchemische Beihefte 27 (1928) p. 349.
A.H.M. Andreasen, Kolloid Z. 50 (1930) p. 217.
J.E. Ayer and F.E. Soppett, J. Am. Ceram. Soc. 48 (1965) p. 180.
R.M. German, Particle Packing Characteristics (Metal Powder Industries Federation, Princeton, NJ, 1989).
R.K. McGeary, J. Am. Ceram. Soc. 44 (1961) p. 513.
G.D. Scott, Nature 188 (1960) p. 908.
B.B. Mandelbrot, The Fractal Geometry of Nature (W.H. Freeman and Company, New York, 1983).
G. Herdan, Small Particle Statistics (Butterworth, London, 1953).
R.M. German, Powder Injection Molding (Metals Powder Industries Federation, Princeton, NJ, 1990).
A.N. Patankar and G. Mandal, Trans. Indian Ceram. Soc. 39 (1980) p. 109.
D.R. Dinger and J.E. Funk, presented at Fine Particle Society Meeting, Chicago, IL, April 12, 1982.
J.E. Funk and D.R. Dinger, Predictive Process Control of Crowded Particulate Suspensions Applied to Ceramic Manufacturing (Kluwer Academic Publishers, Boston, 1994).
J.E. Funk and D.R. Dinger, Interceram. 41 (1992) p. 10.
D.R. Dinger and J.E. Funk, Interceram. 41 (1992) pp. 95, 176.
D.R. Dinger and J.E. Funk, Interceram. 41 (1992) p. 332.
D.R. Dinger and J.E. Funk, Interceram. 41 42 (1993) p. 150.
D.R. Dinger and J.E. Funk, Interceram. 43 (1994) pp. 87, 150.
J.E. Funk and D.R. Dinger, Interceram. 43 (1994) p. 350.
R.M. German, Rev. Powder Metall. Phys. Ceram. 5 (1992) p. 81.
D.J. Cumberland and R.J. Crawford, The Packing of Particles (Elsevier Science Publishers B.V., Amsterdam, 1987).
H.J. Frost, Acta Metall. 30 (1982) p. 889.
H.J. Frost and R. Raj, J. Am. Ceram. Soc. 65 (1982) p. C–19.
R.K. Bordia, Scripta Metall. 18 (1984) p. 725.
S.V. Nair, B.C. Hendrix, and J.K. Tien, Acta Metall. 34 (1986) p. 1599.
R. Jullien, P. Jund, D. Caprion, and D. Quitmann, Phys. Rev. E in press.
C.R. Wildemuth and M.C. Williams, Rheol. Acta 23 (1984) p. 627.
B.C. Trent, in Key Questions in Rock Mechanics: Proc. 29th U.S. Symp., edited by P.A. Cundall, R.L. Sterling, and A.M. Starfield (University of Minnesota, A.A. Balkema Publishers, Rotterdam, 1988) p. 395.
Y. Hamada, K. Ishizaki, and J. Briceno, J. Ceram. Soc. Jpn. 98 (1990) p. 343.
M. Jiang, S. Wang, and X. Jin, J. Mater. Sci. Lett. 9 (1990) p. 1272.
K.L. Hoy and R.H. Peterson, J. Coatings Technol. 64 (1992) p. 59.
G.Q. Lu and X. Shi, J. Mater. Sci. 13 (1994) p. 1709.
J. Cesarano, M.J. McEuen, and T. Swiler, in Diversity Into the Next Century Conf, Int. SAMPE Tech. Conf. Ser., No. 27, edited by R.J. Martinez, H. Arris, J.E. Emerson, and G. Pike (Society for the Advancement of Materials and Process Engineering [SAMPE], Covina, CA, 1995) p. 658.
R.C. Burk and Apté P.S., Am. Ceram. Soc. Bull. 66 (1987) p. 1389.
I.L. Davis and R.G. Carter, J. Appl. Phys. 67 (1990) p. 1022.
K.S. Kwong, PhD dissertation, Clemson University, 1991.
F.G.R. Gauthier and S.C. Danforth, J. Mater. Sci. 26 (1991) p. 6035.
D.C.C. Lam and M. Nakagawa, J. Ceram. Soc. Jpn. 102 (1994) p. 133.
N. Standish and A.B. Yu, Powder Technol. 49 (1987) p. 249.
A. Yu, R. Zou, and N. Standish, J. Am. Ceram. Soc. 75 (1992) p. 2765.
C.J. Markhoff, B.C. Mutsuddy, and J.W. Lennon, in Advances in Ceramics: Forming of Ceramics, vol. 9, edited by J. Mangels and G.L. Messing (American Ceramic Society, Columbus, OH, 1984) p. 246.
A.B. Yu and N. Standish, Powder Technol. 55 (1988) p. 171.
A.B. Yu and N. Standish, Ind. Eng. Chem. Res. 30 (1991) p. 1372.
J. Zheng, P.F. Johnson, and J.S. Reed, J. Am. Ceram. Soc. 73 (1990) p. 1392.
A.E.R. Westman and H.R. Hugill, J. Am. Ceram. Soc. 13 (1930) p. 767.
Van A.B. Groenou and R.C.D. Lissenburg, J. Am. Ceram. Soc. 66 (1983) p. C156.
R.C. Burk, T.W. Zawidzki, and P.S. Apte, J. Am. Ceram. Soc. 66 (1983) p. 815.
M.F. Yan, R.M. Cannon, H.K. Bowen, and U. Chowdhry, Mater. Sci. Eng. 60 (1983) p. 275.
E. Liniger and R. Raj, J. Am. Ceram. Soc. 13 (1987) p. 843.
T.S. Yeh and M.D. Sacks, J. Am. Ceram. Soc. 13 (1988) p. C–484.
R.M. German, Metall. Trans. A 23A (1992) p. 1455.
B.V. Velamakanni and F.F. Lange, J. Am. Ceram. Soc. 74 (1991) p. 166.
J.V. Milewski, H.S. Katz, and K.W. Lee, 40th Annu. Tech. Conf. (Society of the Plastic Industry, Atlanta, 1985).
J.V. Milewski, Adv. Ceram. Mater. 13 (1986) p. 36.
T.L. Starr, Am. Ceram. Soc. Bull. 65 (1986) p. 1293.
N. Peronius and T.J. Sweeting, Powder Technol. 42 (1985) p. 113.
R. Zok, F.F. Lange, and J.R. Porter, J. Am. Ceram. Soc. 74 (1991) p. 1880.
S. Blackburn and H. Böhm, J. Mater. Sci. 29 (1994) p. 4157.
T. Ikegami, J. Am. Ceram. Soc. 79 (1996) p. 148.
D.R. Dinger, in Science of Whitewares, edited by V.E. Henkes, G.Y. Onoda, and W.M. Carty (American Ceramic Society, Westerville, OH, 1996) p. 105.
N. Kines, MS thesis, Georgia Institute of Technology, 1984.
B.M. Gursky, MS thesis, Georgia Institute of Technology, 1986.
P.A. Smith and R.A. Haber, Ceram. Eng. Set. Proc. 10 (1989) p. 1.
P.A. Smith and R.A. Haber, J. Am. Ceram. Soc. 75 (1992) p. 290.
L. López, MS thesis, Clemson University, 1994.
J.J. Restrepo, MS thesis, Clemson University, 1992.
J.J. Restrepo and D.R. Dinger, Interceram. 13 (1995) p. 391.
S. Villegas, MS thesis, Clemson University, 1995.
S. Villegas and D.R. Dinger, in Revista Ceramica, vol. 274 (40th Congresso Brasileiro de Ceramica, 1996).
S. Villegas and D.R. Dinger, Am. Ceram. Soc. Bull. 13 (1996) p. 71.
S. Villegas and D.R. Dinger, Am. Ceram. Soc. Bull. 75 (1996) p. 79.
D.R. Dinger, in Rheology and Rheometry of Clay-Water Systems, 2nd ed. (K-T. Clay Company) in press.
J.E. Funk and D.R. Dinger, Am. Ceram. Soc. Bull. 13 (1994) p. 66.
J.E. Funk, D.R. Dinger, and J.E. Funk Jr., in Proc. Changes in Refractory Technol. Symp. (American Ceramic Society, St. Louis, 1982).
J.E. Funk, D.R. Dinger, and J.E. Funk Jr., Report, Empire State Electric Energy Research Corporation (ESEERCO) (New York, 1980).
J.E. Funk and D.R. Dinger, in Proc. Solids Transport Contractors’ Review Meeting (U.S. Department of Energy, PETC, Pittsburgh, 1987).
J.E. Funk and D.R. Dinger, DOE Report No. DE-FG22-84PC70804 (1987).
J.E. Funk and D.R. Dinger in Proc. Joint Direct Utilization AR&TD Contractors’ Review Meeting (PETC/METC, Pittsburgh, 1986) p. 127.
G.W. Crume and D.R. Dinger, Ceram. Eng. Sci. Proc. 13 (1991) p. 68.
J.E. Funk and D.R. Dinger, Am. Ceram. Soc. Bull. 67 (1988) p. 890.
J.E. Funk and D.R. Dinger, Am. Ceram. Soc. Bull. 13 (1995) p. 48.
A. Hafaiedh, PhD dissertation, Alfred University, 1988.
D.R. Dinger and J.E. Funk, Mater. Eng. 2 (1991) p. 1.
A. Hafaiedh, D.R. Dinger, and J.E. Funk, Mater. Eng. 2 (1991 p. 25.
A. Hafaiedh and D.R. Dinger, Mater. Eng. 2 (1991 p. 169.
A. Hafaiedh, D.R. Dinger, and J.E. Funk, Mater. Eng. 2 (1991 p. 205.
L.A. López-Begué, J.E. Funk, and D.R. Dinger, “The Influence of Particle Size Distribution on the Rheological Properties of Triaxial Porcelain Suspensions” (unpublished manuscript).
K.J. Woodard, PhD dissertation, Clemson University, 1996.
A. Hafaiedh, MS thesis, Alfred University, 1986.
A. Hafaiedh, D.R. Dinger, and J.E. Funk, in Proc. 8th Int. Symp. on Coal Slurry Fuels Preparation and Utilization (U.S. Department of Energy, PETC, Orlando, FL, 1986).
J.E. Funk and D.R. Dinger, Ceram. Ind. 13 (1993) p. 63.
A.M. Gaudin and R.T. Hukki, Trans. AIME 13 (1944) p. 67.
P.A. Smith and R.A. Haber, J. Am. Ceram. Soc. 13 (1995) p. 1737.
D.K. Peeler, T.D. Taylor, D.R. Dinger, and O.B. Cavin, in Proc. 3rd Int. Conf. on the Advances in Fusion and Processing of Glass, edited by A.K. Varshneya, D.F. Bickford, and D. Bihuniak (American Ceramic Society, New Orleans, 1993).
C.A. Sheckler and D.R. Dinger, J. Am. Ceram. Soc. 73 (1990) p. 24.
M. Takahashi and S. Suzuki, Am. Ceram. Soc. Bull. 13 (1985) p. 1237.
M. Takahashi, S. Suzuki, and M. Kosakai, J. Am. Ceram. Soc. 13 (1986) p. 9.
M. Takahashi and S. Suzuki, Am. Ceram. Soc. Bull. 13 (1986) p. 1587.
F.F. Lange, J. Mater. Res. 13 (1987) p. 59.
G.F. Bocchini, Powder Metall. 13 (1987) p. 261.
J. Zheng and J.S. Reed, J. Am. Ceram. Soc. 71 (1988) p. C456.
F.F. Lange, D.C.C. Lam, and O. Sudre, in Processing Science of Advanced Ceramics, edited by I.A. Aksay, G.L. McVay, and D.R. Ulrich (Mater. Res. Soc. Symp. Proc. 155, Pittsburgh, 1989) p. 309.
S.J. Glass, K.G. Ewsuk, and F.M. Mahoney, in Proc. Am. Ceram. Soc. Int. Symp. Manufacturing Practices Technol. (American Ceramic Society, New Orleans, LA, 1995).
M.J. Readey and F.M. Mahoney, in Diversity Into the Next Century Conf., Int. SAMPE Tech. Conf. Ser., No. 27, edited by R.J. Martinez, H. Arris, J.E. Emerson, and G. Pike, (Society for the Advancement of Materials and Process Engineering [SAMPE], Covina, CA, 1995) p. 622.
H. Takahashi, N. Shinohara, K. Uematsu, and T. Junichiro, J. Am. Ceram. Soc. 13 (1996) p. 843.
G.F. Bocchini, Int. J. Powder Metall. 13 (1986) p. 185.
E.R. Rice and J. Tengzelius, Powder Metall. 13 (1986) p. 183.
O.R. Walton, in Workshop on Mechanics and Statistical Physics of Particulate Materials (La Jolla, CA, 1994).
J.C. Chang, B.V. Velamakanni, F.F. Lange, and D.S. Pearson, J. Am. Ceram. Soc. 13 (1991) p. 2201.
S. Sumita, W.E. Rhine, and H.K. Bowen, J. Am. Ceram. Soc. 13 (1991) p. 2189.
G. Crum, PhD dissertation, Clemson University, 1993.
J. Zheng and J.S. Reed, J. Am. Ceram. Soc. 13 (1989) p. 810.
R.M. German, Acta Metall. Mater. 13 (1992) p. 2085.
J. Zheng and J.S. Reed, Am. Ceram. Soc. Bull. 13 (1992) p. 1410.
T.M. Shaw, Am. Ceram. Soc. Bull. 76 (1993) p. 664.
Y. Liu, D.F. Heaney, and R.M. German, Acta Metall. Mater. 13 (1995) p. 1587.
J.K. Wright, M.J. Edirisinghe, J.G. Zhang, and J.R.G. Evans, J. Am. Ceram. Soc. 13 (1990) p. 2653.
G. Bandyopadhyay and K.W. French, Am. Ceram. Soc. Bull. 13 (1994) p. 107.
K. Uematsu, H. Ito, S. Ohsaka, H. Takahashi, N. Shinohara, and M. Okumiya, J. Am. Ceram. Soc. 13 (1995) p. 3107.
M.W. Grutzeck, D. Shi, G. Liu, and S. Kwan, J. Mater. Set. 13 (1993) p. 3444.
M. Satake, in Powders & Grains 93, edited by C. Thornton (A.A. Balkema Publishers, Rotterdam, 1993) p. 3.
O.R. Walton, in Particulate Two-Phase Flow, edited by M.C. Roco (Butterworth-Heinemann, Boston, MA, 1993) p. 885.
O.R. Walton, Mech. Mater. 13 (1993) p. 239.
O.R. Walton and R.L. Braun, in joint DOE/NSF Workshop on Flow of Particulates and Fluids (U.S. Department of Energy and the National Science Foundation, Ithaca, NY, 1993).
T. Zhang and J.R. Evans, J. Am. Ceram. Soc. 13 (1993) p. 481.
V.M. Kenkre, M.R. Endicott, S.J. Glass, and A.J. Hurd, J. Am. Ceram. Soc. 79 (1996) p. 3045.
R.B. Cass, K.G. Ewsuk, and W.R. Blumenthal, Ceram. Ind. 13 (1997) p. 36.
G.T. Nolan and P.E. Kavanagh, J. Coatings Technol. 13 (1995) p. 37.
Rights and permissions
About this article
Cite this article
Dinger, D.R., Funk, J.E. Particle-Packing Phenomena and Their Application in Materials Processing. MRS Bulletin 22, 19–23 (1997). https://doi.org/10.1557/S0883769400034692
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400034692