This is a preview of subscription content, log in via an institution to check access.
References
J. Carmody, S. Selkowitz, and L. Heschong, Residential Windows (W.W. Norton & Company, Inc., New York, 1996)
C.G. Granqvist, in Electricity: Efficient End-Use and New Generation Technologies, and their Planning Implications, edited by T.B. Johansson, B. Bodlund, and R.H. Williams (Lund University Press, Lund, Sweden, 1989) p. 89.
W.D. Dachselt, W.D. Miinz, and M. Schere, Proc. SPIE 324 (1982) p. 37.
R.L. Bernardi and S.J. Nadel, ibid. 502 (1984) p. 24.
R.P. Howson, Glass Int. 19 (1996) p. 55.
P.H. Berning, Appl. Opt. 22 (1983) p. 4127.
Ashrae Handbook Fundamentals (Am. Soc. Heating, Refrigerating and Air-Conditioning Engineers, Atlanta, 1985) ch. 27, p. 1.
Thermal performance parameters for the insulated glass units were calculated with Windows 4.0 software package, Energy and Environment Division, Lawrence Berkeley Laboratory, Berkeley, CA, USA, 1992.
J.P. Holman, Heat Transfer (McGraw-Hill, New York, 1976).
ASTM/E 1585-93 (Am. Soc. Test. Mater., Philadelphia, 1993) p. 1.
For example, see J.H. Apfel and M. Gelber, U.S. Patent No. 3,682,528 (1972)
F.H. Gillery, U.S. Patent No. 4,017,661 (1977)
L. Chang, U.S. Patent No. 4,179,181 (1979)
J.C.C. Fan, U.S. Patent No. 4,337,990 (1982)
F.H. Gillery, R.C. Criss, J. Finley, U.S. Patent No. 4,716,086 (1987).
J.J. Finley, J. Vac. Sci. Technol. A 14 (1996) p. 739.
J. Szczyrbowski, A. Dietrich, and K. Har-tig, Sol. Energy Mater. 19 (1989) p. 43.
Colors specified by CIE 1931 x and y chro-maticity coordinates and the luminescence factor Y (2° observer, illuminant D65). For a discussion of color and color measurement, see F.W. Billmeyer, Jr. and M. Saltzman, Principles of Color Technology, 2nd ed. (John Wiley & Sons, New York, 1
For a discussion of thin-film optics, see O.S. Heavens, Optical Properties of Thin Solid Films (Dover Publications, Mineola, NJ, 1991) p. 46.
Pending U.S. Patent.
J.L. Vossen and W. Kern, Thin Film Processes II (Academic Press, San Diego, 1991) p. 177.
J.A. Dobrowolski, in Handbook of Optics, vol. I, 2nd ed., ch. 42, edited by M. Bass, E.W. Van Stryland, D.R. Williams and W.L. Wolfe (McGraw-Hill, New York, 1995).
A.G. Dirks, J.J. Van Den Broek, and P.E. Wierenga, J. Appl. Phys. 55 (1984) p. 4248.
J.J. Van Den Broek, A.G. Dirks, and P.E. Wierenga, Thin Solid Films 130 (1985) p. 95.
M. Ohring, The Materials Science of Thin Films (Academic Press, San Diego, 1992).
M. Arbab, J. PPG Technol. 3 (1997) p. 29.
G. Beister, S. Beisswenger, G. Brauer, E. Dietrich, R. Kukla, J. Szczyrbowski, and G. Teschner, Glastech. Ber. 66 (1993) p. 175.
L. Herlitze, R. Blessing, A. Gombert, W. Graf, and M. Kohl, Proc. SPIE 2255 (1994) p. 525.
F.H. Gillery, U.S. Patent No. 4,610,771 (1986); Ibid., U.S. Patent No. 5,178,966 (1993).
M. Miyazaki and E. Ando, J. Non-Cryst. Solids 178 (1994) p. 245.
R.C. Ross, R. Sherman, and R.A. Bunger, Sol. Energy Mater. 19 (1989) p. 55.
A.A. Schmidt, J. Offermann, and R. Anton, Thin Solid Films 105 (1996) p. 281.
D.R. Hollars, U.S. Patent No. 4,421,622 (1983).
ASTM/E 891-87Am. Soc. Test. Mater., Philadelphia, reapproved 1992) p. 462
Rights and permissions
About this article
Cite this article
Arbab, M. Sputter-Deposited Low-Emissivity Coatings on Glass. MRS Bulletin 22, 27–35 (1997). https://doi.org/10.1557/S0883769400033972
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400033972