References
G.A.D Briggs, Acoustic Microscopy (Clarendon Press, Oxford, 1992).
SAM 100, Krämer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 35729, Herbom 35745, Germany.
G. Pfannschmidt, “Characterization of Electronic Components by Acoustic Microscopy,” in Advances in Acoustic Microscopy 2, edited by G.A.D Briggs and W. Arnold (Plenum Press, New York) in press.
G.M. Crean, C.M. Flannery, and S.C.O Mathuna, “Acoustic Microscopy Analysis of Microelectronic Interconnection and Packaging Technologies,” in Advances in Acoustic Microscopy 1, edited by G.A.D Briggs (Plenum Press, New York, 1995).
J.D. Crossen, J.M. Sykes, D. Knauss, G.A.D Briggs, and J.P. Lomas, “The Influence of Water on the Coating-Material Interface: Adhesion Measurements and Scanning Acoustic Microscopy,” in Advances in Corrosion Protection by Organic Coatings II, edited by J.D. Scantlebury and M. Kendig (The Electrochemical Society, 1994) p. 274.
D. Knauss, T. Zhai, G.A.D Briggs, and J.W. Martin, “Measuring Short Cracks by Time-Resolved Acoustic Microscopy,” in Advances in Acoustic Microscopy 1, edited by G.A.D Briggs (Plenum Press, New York, 1995) p. 49.
C.W. Lawrence, G.A.D Briggs, and C.B. Scruby, “Acoustic Microscopy of Ceramic-Fibre Composites: Part II, Glass-Ceramic-Matrix Composites,” J. Mater. Sci. 28 (1993) p. 3645.
J.D. Achenbach, J.O. Kim, and Y.C. Lee, “Measuring Thin-Film Elastic Constants by Line-Focus Acoustic Microscopy,” in Advances in Acoustic Microscopy I, edited by G.A.D Briggs (Plenum Press, New York, 1995) p. 153.
Z. Sklar, P. Mutti, N.C. Stoodley, and G.A.D Briggs, “Measuring the Elastic Properties of Stressed Materials by Quantitative Acoustic Microscopy,” in Advances in Acoustic Microscopy I, edited by G.A.D Briggs (Plenum Press, New York, 1995) p. 153 p. 209.
J. Kushibiki, H. Ishiji, T. Kobayashi, N. Chubachi, I. Sahashi, and T. Sasamata, “Characterization of 36°-YX LiTaO3 Wafers by Line-Focus-Beam Acoustic Microscopy,” IEEE Trans Ultrasonics Ferroelectrics Frequency Control 42 (1995) p. 83.
P.D. Warren, C. Pecorari, O.V. Kolosov, S.G. Roberts, and G.A.D Briggs, “Characterisation of Surface Damage Via Surface Acoustic Waves,” in Nanotechnology in press.
P. Mutti, C.E. Bottani, G. Ghislotti, M. Beghi, G.A.D Briggs, and J.R. Sandercock, “Surface Brillouin Scattering—Extending Surface Wave Measurements to 20 GHz,” in Advances in Acoustic Microscopy I, edited by G.A.D Briggs (Plenum Press, New York, 1995) p. 249.
BriSc, Bede Scientific Instruments Ltd., Lindsey Park, Bowburn, Durham DH6 5PF, UK; http://www.bede.co.uk.
P.D. Warren, C. Pecorari, O.V. Kolosov, S.G. Roberts, and G.A.D Briggs, “Characterisation of Surface Damage Via Contact Probes,” in Nanotechnology in press.
O. Kolosov, W. Arnold, K. Yamanaka, and G.A.D Briggs, “Nanoscale Imaging of Dynamic Mechanical Properties by Ultrasonic Force Microscopy,” in Acoustical Imaging, vol. 22, edited by P. Tortoli (Plenum Press, New York) in press.
O. Kolosov, K. Yamanaka, H. Ogiso, and H. Tokumoto, “Elastic Imaging With Nanoscale and Atomic Resolution by Ultrasonic Force Microscopy (UFM)” in Nanostructures and Quantum Effects (Springer-Verlag, 1994) p. 349.
K. Yamanaka, “New Approaches in Acoustic Microscopy for Noncontact Measurement and Ultra High Resolution,” in Advances in Acoustic Microscopy I, edited by G.A.D Briggs (Plenum Press, New York, 1995) p. 301.
O. Kolosov and K. Yamanaka, “Nonlinear Detection of Ultrasonic Vibrations in an Atomic Force Microscope,” in Jpn. J. Appl. Phys. Lett. 32 (1993) p. L1095.
O.V. Kolosov, K. Yamanaka, K. Watanabe, F. Sakai, and M. Yasutake, “Ultrasonic Atomic Force Microscope,” Japan Patent Application, F1909,5-133878, priority 11.05.93.
Rights and permissions
About this article
Cite this article
Briggs, A., Kolosov, O. Acoustic Microscopy for Imaging and Characterization. MRS Bulletin 21, 30–35 (1996). https://doi.org/10.1557/S0883769400031614
Published:
Issue Date:
DOI: https://doi.org/10.1557/S0883769400031614