Abstract
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
References
Y.H. Liu, W.H. Wang Comment on “Homogeneity of Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass” by L-Y. Chen, Y-W. Zeng, Q-P. Cao, B-J. Park, Y-M. Chen, K. Hono, U. Vainio, Z-L. Zhang, U. Kaiser, X-D. Wang, and J-Z. Jiang. [J. Mater. Res. 24, 3116 (2009)] J. Mater. Res. 25, 598 (2010)
L-Y Chen, Y-W Zeng, Q-P Cao, B-J Park, Y-M Chen, K. Hono, U. Vainio, Z-L Zhang, U. Kaiser, X-D Wang, J-Z Jiang Homogeneity of Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass. J. Mater. Res. 24, 3116 (2009)
M.J. Aziz Nanoscale morphology control using ion beams Ion Beam Science: Solved and Unsolved Problems edited by P. Sigmund (Royal Danish Academy, Copenhagen 2006)
H.B. George Ion-stimulated mass transport in nanoscale morphology evolution. Ph.D. ThesisHarvard University, Cambridge, MA 2007
B.B. Sun, Y.B. Wang, J. Wen, H. Yang, M.L. Sui, J.Q. Wang, E. Ma Artifacts induced in metallic glasses during TEM sample preparation. Scr. Mater. 53, 805 (2005)
H.J. Chang, E.S. Park, Y.C. Kim, D.H. Kim Observation of artifact-free amorphous structure in Cu–Zr-based alloy using transmission electron microscopy. Mater. Sci. Eng., A 406, 119 (2005)
Q.P. Cao, J.F. Li, Y.H. Zhou, A. Horsewell, J.Z. Jiang Effect of rolling deformation on the microstructure of bulk Cu60Zr20Ti20 metallic glass and its crystallization. Acta Mater. 54, 4373 (2006)
Y. Yokoyama, K. Fujita, A.R. Yavari, A. Inoue Malleable hypoeutectic Zr-Ni-Cu-Al bulk glassy alloys with tensile plastic elongation at room temperature. Philos. Mag. Lett. 89, 322 (2009)
D.H. Bae, S.W. Lee, J.W. Kwon, X.D. Wang, S. Yi Ductile Zr-base bulk metallic glass. Mater. Sci. Eng., A 449, 111 (2007)
L.Y. Chen, Z.D. Fu, G.Q. Zhang, X.P. Hao, Q.K. Jiang, H. Franz, Y.G. Liu, H.S. Xie, S.L. Zhang, B.Y. Wang, Y.W. Zeng, J.Z. Jiang New class of plastic bulk metallic glass. Phys. Rev. Lett. 100, 075501 (2008)
J. Schroers, W.L. Johnson Ductile bulk metallic glass. Phys. Rev. Lett. 93, 255506 (2004)
L.Y. Chen, A.D. Setyawan, H. Kato, A. Inoue, G.Q. Zhang, J. Saida, X.D. Wang, J.Z. Jiang Free-volume-induced enhancement of plasticity in a monolithic bulk metallic glass at room temperature. Scr. Mater. 59, 75 (2008)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, LY., Cao, QP., Jiang, J.Z. et al. Reply to the comments of Y.H. Liu: Ion sputter erosion in metallic glass—A response to “Comment on: Homogeneity of Zr64.13Cu15.75Ni10.12Al10 bulk metallic glass” by L-Y. Chen, Y-W. Zeng, Q-P. Cao, B-J. Park, Y-M. Chen, K. Hono, U. Vainio, Z-L. Zhang, U. Kaiser, X-D. Wang,and J-Z Jiang [J. Mater. Res. 24, 3116 (2009)]. Journal of Materials Research 25, 602–604 (2010). https://doi.org/10.1557/JMR.2010.0079
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2010.0079